电接触强化对Ni/Cu复合镀层组织与性能的影响

doi:10.13251/j.issn.0254-6051.2020.08.044

金属热处理 ›› 2020, Vol. 45 ›› Issue (8): 228-232.DOI: 10.13251/j.issn.0254-6051.2020.08.044

电接触强化对Ni/Cu复合镀层组织与性能的影响

李志宏¹, 丁浩^1,2, 朱世根^1,2

1.东华大学机械工程学院, 上海 201620;
2.纺织装备教育部工程研究中心, 上海 201620

收稿日期:2020-01-29 出版日期:2020-08-25 发布日期:2020-09-07
通讯作者: 朱世根,教授,博士,E-mail:sgzhu@dhu.edu.cn
作者简介:李志宏(1994—),男,硕士研究生,主要研究方向为金属成型及其高性能化,E-mail:15000813806@163.com

Effect of electrical contact strengthening on microstructure and properties of Ni/Cu composite coatings

Li Zhihong¹, Ding Hao^1,2, Zhu Shigen^1,2

1. College of Mechanical Engineering, Donghua University, Shanghai 201620, China;
2. Engineering Research Center of Advanced Textile Machinery of Ministry of Education, Shanghai 201620, China

Received:2020-01-29 Online:2020-08-25 Published:2020-09-07

摘要/Abstract

摘要： 利用电刷镀在铸铁表面制备了厚度在1 mm左右的Ni/Cu复合镀层,并对镀层进行了电接触强化试验。利用场发射电镜(FESEM)、维氏硬度计分析了电接触强化对镀层组织性能的影响。试验结果表明,电接触强化改善了镀层表面和内部质量,减少了镀层内部裂纹、孔洞等缺陷。同时,电接触强化使镀层和基体之间产生了部分镶嵌熔融。电接触强化改变了Ni层与Cu层的组织结构,使镀层组织更加致密紧实,Cu层和Ni层之间发生了塑性变形,产生了一定的镶嵌。强化后镀层表面及截面硬度都有所提升。镀层与基体之间形成的硬化层硬度远大于基体硬度,电接触强化提高了镀层与基体之间的结合力。

关键词: 电刷镀, Ni/Cu复合镀层, 电接触强化, 组织与性能

Abstract: Ni/Cu composite coating with a thickness of 1 mm was prepared by brush plating on the surface of the cast iron, and the coating was subjected to electrical contact strengthening test. The effect of electrical contact strengthening on the microstructure and property of the coating was analyzed by means of field emission electron microscopy (FESEM) and Vickers hardness tester. The test results show that the electrical contact strengthening improves the surface and internal quality of the coating and reduces defects such as cracks in the coating. At the same time, electrical contact strengthening results in partial mosaic melting between the coating and the substrate. The electrical contact strengthening changes the microstructure of the Ni layer and the Cu layer, making the coating structure denser and tighter, and plastic deformation occurs between the Cu layer and Ni layer, resulting in a certain inlay. After strengthening, the surface and cross-section hardness of the coating are improved. The hardness of the hardened layer formed between the plating layer and the substrate is much greater than that of the substrate, and the electrical contact strengthening improves the bonding strength between the plating layer and the substrate.

Key words: brush plating, Ni/Cu composite coating, electrical contact strengthening, microstructure and properties

中图分类号:

TG174.4

李志宏, 丁浩, 朱世根. 电接触强化对Ni/Cu复合镀层组织与性能的影响[J]. 金属热处理, 2020, 45(8): 228-232.

Li Zhihong, Ding Hao, Zhu Shigen. Effect of electrical contact strengthening on microstructure and properties of Ni/Cu composite coatings[J]. Heat Treatment of Metals, 2020, 45(8): 228-232.

参考文献

[1]沈品华. 现代电镀手册[M]. 北京: 机械工业出版社, 2010.
[2]丁小龙, 胡振峰, 金国, 等. 电刷镀Ni-石墨烯复合镀层的组织结构及性能[J]. 材料工程, 2018, 46(11): 110-117.
Ding Xiaolong, Hu Zhenfeng, Jin Guo, et al. Microstructure and properties of electro-brush plating Ni-graphene composite coating[J]. Journal of Materials Engineering, 2018, 46(11): 110-117.
[3]徐龙堂, 徐滨士, 周美玲, 等. 电刷镀镍包纳米Al₂O₃颗粒复合镀层微动磨损性能研究[J]. 摩擦学学报, 2001(1): 24-27.
Xu Longtang, Xu Binshi, Zhou Meiling, et al. Anti-fretting properties of Ni/Ni-coated nano-Al₂O₃ composite coating prepared by electro-brush plating[J]. Tribology, 2001(1): 24-27.
[4]刘霁云, 赵阳, 董世运, 等. 脉冲电刷镀Ni-Co镀层及其硬度的研究[J]. 表面技术, 2018, 47(1): 218-223.
Liu Jiyun, Zhao Yang, Dong Shiyun, et al. Ni-Co alloy coatings prepared by pulse brush electroplating and their microhardness[J]. Surface Technology, 2018, 47(1): 218-223.
[5]葛祥荣. 大厚度电刷镀镍镀层的研制[C]// 江苏省机械工程学会. 江苏省机械工程学会第六次会员代表大会论文集. 2002: 1.
[6]罗湘. 高性能镍基厚涂层的制备工艺及强化[D]. 上海: 东华大学, 2017.
[7]袁庆龙, 张宝庆, 范广新, 等. 电刷镀快速镍厚镀层的制备方法: 中国, CN103255451A[P]. 2013-08-21.
[8]薛伯生. 可溶性阳极快速镍电刷镀工艺的优化[J]. 材料保护, 2006, 39(3): 27-28.
Xue Bosheng. Process optimization of rapid brush nickel plating solution with soluble anode[J]. Materials Protection, 2006, 39(3): 27-28.
[9]Milenko B, Valery V Konchits, Nikolai K Myshkin. Electrical Contacts Fundamentals, Applications and Technology[M]. Boca Raton: CRC Press, 2007: 207-212.
[10]梅莹, 丁浩, 朱世根. 电接触强化对Ni-P镀层组织与性能的影响[J]. 热加工工艺, 2017, 46(22): 181-183.
Mei Ying, Ding Hao, Zhu Shigen. Effect of electric contact strengthening on microstructure and properties of Ni-P coating[J]. Hot Working Technology, 2017, 46(22): 181-183.
[11]徐梦廓, 朱世根, 丁浩. WC-Al₂O₃纳米颗粒增强Ni-P复合镀层的电接触强化及性能[J]. 金属热处理, 2016, 41(11): 83-87.
Xu Mengkuo, Zhu Shigen, Ding Hao. Electric contact strengthening and properties of Ni-P/WC-Al₂O₃ composite coating by electro brush plating[J]. Heat Treatment of Metals, 2016, 41(11): 83-87.

[1]	黄娟, 黄元春, 申振宇, 李湘粤, 曾渝, 杨庚辰. 终轧温度及退火温度对5052铝合金板材组织及性能的影响[J]. 金属热处理, 2021, 46(9): 79-84.
[2]	陈义武, 吴鑫翔, 周利华, 付天佐, 赵静, 李胜. 高强不锈钢激光熔覆层的组织与性能[J]. 金属热处理, 2021, 46(10): 232-236.
[3]	闫磊, 李许明, 李凯峰, 马凤春. 回火工艺对1Cr12Ni3MoVN钢组织和性能的影响[J]. 金属热处理, 2020, 45(3): 196-199.
[4]	田亚强，高天佐，宋进英，郑小平，魏英立，陈连生. I&Q&PB处理后低碳硅锰贝氏体钢的组织与性能[J]. 金属热处理, 2016, 41(5): 95-98.
[5]	包文全，刘桂江，杨建华，郭强. 热处理对45Cr14Ni14W2Mo钢组织和性能的影响[J]. 金属热处理, 2016, 41(5): 153-155.
[6]	綦秀玲1、2，刘政军2，周有兴1，万应麒1，张勇1. 磁场频率对固溶时效处理AZ91合金焊接接头组织和性能的影响[J]. 金属热处理, 2016, 41(2): 155-158.
[7]	徐梦廓，朱世根，丁浩. WC-Al2O3纳米颗粒增强Ni-P复合刷镀层的电接触强化及其性能[J]. 金属热处理, 2016, 41(11): 83-87.
[8]	张宇本，赵承燕. 建筑复合钢板焊接接头的显微组织与性能[J]. 金属热处理, 2016, 41(10): 66-70.
[9]	李国宝. 回火工艺对大线能量焊接用高强度钢板组织与性能的影响[J]. 金属热处理, 2015, 40(5): 146-149.
[10]	李亮，白雪玉，孙永生，王炜，徐广平. 1J50软磁合金的真空退火工艺[J]. 金属热处理, 2015, 40(5): 150-152.
[11]	綦秀玲1,2，刘政军2，周有兴1，万应麒1，张勇1. 磁场电流对固溶处理AZ91焊接接头组织和性能的影响[J]. 金属热处理, 2015, 40(11): 172-175.
[12]	蒙玲, 赵启忠, 李春流, 何建贤. 均匀化处理对5083铝合金铸锭组织与性能的影响[J]. 金属热处理, 2014, 39(8): 101-104.
[13]	时海芳, 王忠奇, 白榆, 周宇明. 氩弧重熔铁基合金粉末喷涂层的组织与性能[J]. 金属热处理, 2014, 39(6): 29-31.
[14]	吴战芳，徐李军，王洪，仇圣桃，陈一胜. 返红温度对铌微合金高强度耐腐蚀船板钢组织与性能的影响[J]. 金属热处理, 2014, 39(2): 43-46.
[15]	金坤文，李必文，程强，胡西云，陈爱瑞. 核阀密封面激光熔覆无钨低碳中钴合金粉末的试验研究[J]. 金属热处理, 2014, 39(2): 77-81.

电接触强化对Ni/Cu复合镀层组织与性能的影响

Effect of electrical contact strengthening on microstructure and properties of Ni/Cu composite coatings

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价