[1] 熊 焕.低温贮箱及铝锂合金的应用[J].导弹与航天运载技术,2001(6):33-40. Xiong Huan.Cryogenic tank and application of aluminium-lithium alloy[J].Missiles and Space Vehicles,2001(6):33-40. [2] 杜家政,隋允康,阳志光,等.基于响应面法的五心底结构形状优化[J].计算力学学报,2011,28(6):839-843. Du Jiazheng,Sui Yunkang,Yang Zhiguang,et al.Shape optimization of five-center shell structure based on response surface method[J].Chinese Journal of Computational Mechanics,2011,28(6):839-843. [3] 杜家政,隋允康,龙连春,等.基于MSC/PCL的三心底结构形状优化[J].计算机辅助工程,2006,15(S1):450-451. Du Jiazheng,Sui Yunkang,Long Lianchun,et al.Shape optimization of three-center shell structure based on MSC PCL[J].Computer Aided Engineering,2006,15(S1):450-451. [4] 陈 炜,王晓燕,王冬颖,等.基于ANSYS-Workbench离心压缩机螺栓热处理工装的研究[C]//第十届沈阳科学学术年会论文集(信息科学与工程技术分册).2013:240-243. [5] 张 蓓,陈淑玲.基于ANSYS Workbench直齿圆柱齿轮淬火过程的热应力模拟[J].机械工程师,2013(11):106-107. Zhang Bei,Chen Shuling.Quenching process simulation of gear based on ANSYS Workbench[J].Mechanical Engineer,2013(11):106-107. [6] 龚雪婷,武志广,李 鑫,等.2.25Cr1Mo 钢大型锻件热处理工艺数值模拟[J].金属热处理,2019,44(3):192-196. Gong Xueting,Wu Zhiguang,Li Xin,et al.Numerical simulation on heat treatment process of 2.25Cr1Mo steel large forgings[J].Heat Treatment of Metals,2019,44(3):192-196. [7] 申文飞,张立文,张 驰,等.加氢反应器焊后局部热处理过程数值模拟与工艺优化[J].金属热处理,2018,43(2):213-217. Shen Wenfei,Zhang Liwen,Zhang Chi,et al.Numerical simulation and optimization of post-weld local heat treatment process of hydrogenation reactor[J].Heat Treatment of Metals,2018,43(2):213-217. [8] 张 岚,张增光,刘 刚.AF1410 超高强度钢薄壁板件热处理畸变控制技术研究与应用[J].金属热处理,2018,43(6):227-231. Zhang Lan,Zhang Zengguang,Liu Gang.Research and application of heat treatment distortion control technology for AF1410 ultra-high strength steel thin-wall panel[J].Heat Treatment of Metals,2018,43(6):227-231. [9] 樊炳辉,焦 浩,贾 娜.基于ANSYS Workbench的排爆机器人机械手静力学分析[J].制造业自动化,2013,36(2):34-36. Fan Binghui,Jiao Hao,Jia Na.Statics analysis for an explosive-handling robot manipulator based on ANSYS Workbench[J].Manufacturing Automation,2013,36(2):34-36. [10] 邢静忠,李 军.ANSYS的建模方法和网格划分[J].中国水运,2006,6(9):116-118. Xing Jingzhong,Li Jun.Methods of creating model and grid partition of ANSYS[J].China Water Transport(Academic Version),2006,6(9):116-118. |