一种基于晶界硬化效应的微细切削本构模型

doi:10.13251/j.issn.0254-6051.2020.11.048

金属热处理 ›› 2020, Vol. 45 ›› Issue (11): 248-254.DOI: 10.13251/j.issn.0254-6051.2020.11.048

一种基于晶界硬化效应的微细切削本构模型

王敏婷^1,2, 申利雄^1,2, 曹明飞^1,2, 赵磊^1,2, 李哲^1,2

1.燕山大学机械工程学院, 河北秦皇岛 066004;
2.河北省重型智能制造装备技术创新中心, 河北秦皇岛 066004

收稿日期:2020-04-10 出版日期:2020-11-25 发布日期:2020-12-29
作者简介:王敏婷(1977—),女,副教授,博士,主要研究方向为精密微成型制造工艺及设备设计,E-mail: wmt@ysu.edu.cn
基金资助:
河北省自然科学钢铁联合基金(E2015203343)

A micro-cutting constitutive model based on grain boundary hardening effect

Wang Minting^1,2, Shen Lixiong^1,2, Cao Mingfei^1,2, Zhao Lei^1,2, Li Zhe^1,2

1. School of Mechanical Engineering, Yanshan University, Qinhuangdao Hebei 066004, China;
2. Heavy-duty Intelligent Manufacturing Equipment Innovation Center of Hebei Province, Qinhuangdao Hebei 066004, China

Received:2020-04-10 Online:2020-11-25 Published:2020-12-29

摘要/Abstract

摘要： 从细微晶粒层面考虑了跨晶界切削、切削颤振等问题,基于晶界硬化效应的霍尔-佩奇定律和常规金属切削本构模型,建立了一种包含材料晶粒平均粒径的微细切削本构模型。通过仿真和切削力试验,对模型的系数进行了修正。研究结果表明,晶粒平均粒径在0.07~0.20 mm时,晶界强化效应较为明显,当晶粒平均粒径超过0.20 mm时,微细切削本构模型对切削力的预测趋势逐渐趋近于常规金属切削本构模型。且随着晶粒平均粒径的增大,常规金属切削本构模型与微细切削本构模型的预测差值逐渐减小。试验数据与理论数据对比验证了微细切削本构模型的准确性。

关键词: 晶界硬化, 微细切削, 本构模型, 平均粒径

Abstract: A micro-cutting constitutive model containing average grain size of the material was established by considering transgranular boundary cutting and cutting flutter at the fine grain level, and based on the Hall-Petch relation relating to the grain boundary hardening effect as well as the conventional metal cutting constitutive model. The coefficients of the model were corrected by simulation and cutting force experiments. The results show that the grain boundary strengthening effect is more obvious when the average grain size is 0.07-0.20 mm. When the average grain size exceeds 0.20 mm, the predicted trend of micro-cutting constitutive model for cutting force gradually approaches that of the conventional metal cutting constitutive model. And as the average grain size increases, the prediction difference between the conventional metal cutting constitutive model and the proposed micro-cutting constitutive model decreases gradually. Comparison of experimental data with theoretical data verifies the accuracy of the micro-cutting constitutive model.

Key words: grain boundary hardening, micro-cutting, constitutive model, average grain size

中图分类号:

TG166

王敏婷, 申利雄, 曹明飞, 赵磊, 李哲. 一种基于晶界硬化效应的微细切削本构模型[J]. 金属热处理, 2020, 45(11): 248-254.

Wang Minting, Shen Lixiong, Cao Mingfei, Zhao Lei, Li Zhe. A micro-cutting constitutive model based on grain boundary hardening effect[J]. Heat Treatment of Metals, 2020, 45(11): 248-254.

参考文献

[1]Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the 7th Int-Symposium on Ballistics-The Hague. 1983: 541-547.
[2]Oxley P L B, Welsh M J M. An explanation of apparent bridgman effect in merchant's orthogonal cutting results[J]. Journal of Engineering for Industry, 1967, 89(3): 549.
[3]Liu K. Processes modeling of micro-cutting including strain gradient effects[D]. Atlanta: Georgia Institute of Technology, 2005.
[4]Arsecularatne J A, Hoffman K M. FIB tomographic analysis of subsurface indentation crack interactions with pores in alumina[J]. Journal of the American Ceramic Society, 2011, 94(11): 137-142.
[5]Arsecularatne J A, Mathew P. The Oxley modeling approach, its applications and future directions[J]. Machining Science and Technology, 2000, 4(3): 363-397.
[6]Lubarada V A, Benson D J, Meyers M A. Strain-rate effects in rheological models ofinelastic response[J]. International Journal of Plasticity, 2003, 19(8): 1097-1118.
[7]张益川. 介观尺度钛合金TC4材料切削响应行为建模与仿真研究[D]. 北京: 北京理工大学, 2015: 23-27.
[8]Jing X B, Zhang D W. Modeling and analysis of factors of size effect in micro-cutting: The tool geometry and the depth of cutting[J]. Manipulation, Manufacturing and Measurement on the Nanoscale, 2013: 314-318.
[9]Hirth J P. The influence of grain boundaries on mechanical properties[J]. Metallurgical Transactions, 1972, 3(12): 3047-3067.
[10]吴希俊. 晶界结构及其对力学性质的影响(Ⅱ)[J]. 力学进展, 1990, 19(2): 433-441.
Wu Xijun. Grain boundary structure and its influence on mechanical properties (II)[J]. Advances in Mechanics, 1990, 19(2): 433-441.
[11]Hansen N. Boundary strengthening in undeformed and deformed polycrystals[J]. Materials Science and Engineering A, 2005, 409(1/2): 39-45.
[12]Zerilli F J, Armstrong R W. Dislocation-mechanics-based constitutive relations for material dynamics calculations[J]. Journal of Applied Physics, 1987, 61(5): 1816.
[13]Samantaray D, Mandal S, Bhaduri A K. A comparative study on Johnson Cook, modified Zerilli-Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr-1Mo steel[J]. Computational Materials Science, 2009, 47(2): 568-576.
[14]王开远. GB/T 6394—2002《金属平均晶粒度测定方法》介绍[J]. 机械工业标准化与质量, 2004(5): 5-8.
[15]Zhao M C, Yin F, Hanamura T, et al. Relationship between yield strength and grain size for a bimodal structural ultrafine-grained ferrite/cementite steel[J]. Scripta Materialia, 2007, 57(9): 857-860.

一种基于晶界硬化效应的微细切削本构模型

A micro-cutting constitutive model based on grain boundary hardening effect

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价

[1]	廖雪峰, 张恒, 何学青, 黄元春, 李明. 不同Cr含量Cu-Cr-Zr合金的热拉伸变形行为[J]. 金属热处理, 2021, 46(9): 28-35.
[2]	屈华鹏, 王留兵, 王东辉, 吴冰洁, 冯翰秋, 许斌, 宋丹戎, 郎宇平. 时效强化高镍合金Inconel-718的高温弹塑性特征及本构模型[J]. 金属热处理, 2021, 46(8): 1-7.
[3]	李冬升, 赵恩旭, 王威, 谭莉, 张俊鹏, 田振宇. IN690合金的高温本构模型及动态再结晶模型[J]. 金属热处理, 2021, 46(8): 8-14.
[4]	朱晓宁, 潘晴, 李毅波, 姜雪鹏. 316LN奥氏体不锈钢的高温流变行为与本构模型[J]. 金属热处理, 2021, 46(11): 9-16.
[5]	朱洪军. 高强韧Ti6246合金热变形行为及应变补偿型本构模型[J]. 金属热处理, 2016, 41(8): 184-188.
[6]	陈学文1, 2，陈天安1，朱美玲1，周会军1. 45Cr4NiMoV合金钢热变形的本构模型[J]. 金属热处理, 2015, 40(2): 152-155.