回火温度对工程机械用超高强钢组织及回火脆性的影响

doi:10.13251/j.issn.0254-6051.2020.12.015

金属热处理 ›› 2020, Vol. 45 ›› Issue (12): 82-86.DOI: 10.13251/j.issn.0254-6051.2020.12.015

回火温度对工程机械用超高强钢组织及回火脆性的影响

郑东升^1,2,3, 刘丹², 罗登², 李慧中³, 张青学², 彭宁琦², 蹇海根¹

1.湖南工业大学冶金与材料工程学院, 湖南株洲 412007;
2.湖南华菱湘潭钢铁有限公司,湖南湘潭 411101;
3.中南大学材料科学与工程学院,湖南长沙 410083

收稿日期:2020-07-30 出版日期:2020-12-25 发布日期:2021-01-14
作者简介:郑东升(1982—),男,博士,主要研究方向为先进钢铁材料开发及其失效机理,E-mail:dongsheng210@163.com
基金资助:
湖南省教育厅科学研究项目(19C0574); 湖南省自然科学基金(2018JJ4060)

Effect of tempering temperature on microstructure and tempering embrittlement of ultra-high strength steel for construction machinery

Zheng Dongsheng^1,2,3, Liu Dan², Luo Deng², Li Huizhong³, Zhang Qingxue², Peng Ningqi², Jian Haigen¹

1. College of Metallurgy and Material Engineering, Hunan University of Technology, Zhuzhou Hunan 412007, China;
2. Xiangtan Iron and Steel Co., Ltd. of Hunan Valin, Xiangtan Hunan 411101, China;
3. School of Materials Science and Engineering, Central South University, Changsha Hunan 410083, China

Received:2020-07-30 Online:2020-12-25 Published:2021-01-14

摘要/Abstract

摘要： 通过SEM、TEM、-20 ℃夏比V型冲击试验等分析手段研究了回火温度对工程机械用超高强钢微观组织及回火脆性的影响,并结合断口特征及微观组织分析裂纹扩展路径。结果表明,试验钢在200~500 ℃回火时,随着回火温度的升高,马氏体分解后形成的碳化物的析出位置从马氏体板条内逐步过渡到原始奥氏体晶界和马氏体板条界,其形状由针状变为粒状,并不断粗化。回火温度为200 ℃和500 ℃时,冲击试样断口的不稳定断裂区为韧性断裂。300 ℃回火时,出现了回火脆性,其冲击试样断口的不稳定断裂区为准解理断裂,裂纹扩展路径相对平直。微观组织分析发现,在原始奥氏体晶界及马氏体板条界析出大量的针状碳化物,这些碳化物提供了裂纹形核位置,促进了裂纹扩展,导致了回火脆性的产生。

关键词: 工程机械, 超高强钢, 碳化物, 回火脆性

Abstract: Effect of tempering temperature on microstructure and tempering embrittlement of ultra-high strength steel for construction machinery was investigated by means of SEM, TEM and Charpy V-notch impact test at -20 ℃. And based on fracture characterization and microstructure, the crack propagation path was analyzed. The results show that carbides formed after martensite decomposition are precipitated gradually from martensite lath to the boundaries of prior austenite grain and martensite lath, the shape of which is changed from needle-like to granular and tends to coarsen with the increase of tempering temperature in the range of 200-500 ℃. Both tempering temperatures of 200 ℃ and 500 ℃ result in the ductile fracture in the unstable fracture zone of impact specimens. When the tempering temperature is 300 ℃, the tempered embrittlement is occurred, the crack propagation path is relatively straight in the unstable fracture zone of impact specimens, which is in accord with quasi-cleavage fracture. By microstrucrure analysis, a large number of needle-like carbides are precipitated along the boundaries of prior austenite grain and martensite lath. These carbides provide crack nucleation sites and promote crack propagation, which can result in the occurrence of tempered embrittlement.

Key words: construction machinery, ultra-high strength steel, carbide, tempered embrittlement

中图分类号:

TG113.25⁺4

郑东升, 刘丹, 罗登, 李慧中, 张青学, 彭宁琦, 蹇海根. 回火温度对工程机械用超高强钢组织及回火脆性的影响[J]. 金属热处理, 2020, 45(12): 82-86.

Zheng Dongsheng, Liu Dan, Luo Deng, Li Huizhong, Zhang Qingxue, Peng Ningqi, Jian Haigen. Effect of tempering temperature on microstructure and tempering embrittlement of ultra-high strength steel for construction machinery[J]. Heat Treatment of Metals, 2020, 45(12): 82-86.

参考文献

[1] Ozgowicz W, Ozgowicz E K.Investigations on the impact strength of constructional high-strength Weldox steel at lowered temperature[J]. Archives of Materials Science and Engineering, 2008, 32(2): 89-94.
[2] Nykänen T, Björk T, Laitinen R.Fatigue strength prediction of ultra high strength steel butt-welded joints[J]. Fatigue and Fracture of Engineering Materials and Structures, 2013, 36(3): 469-482.
[3] Lisiecka A K, Piwnik J, Lisiecki A.Laser welding of new grade of advanced high strength steel STRENX 1100 MC[J]. Archives of Metallurgy and Materials, 2017, 62(3): 1651-1657.
[4] Sorger G, Sarikka T, Vilaça P, et al.Effect of processing temperatures on the properties of a high-strength steel welded by FSW[J]. Welding in the World, 2018, 62(6): 1173-1185.
[5] Salminen A, Farrokhi F, Unt A, et al.Effect of optical parameters on fiber laser welding of ultrahigh strength steels and weld mechanical properties at subzero temperatures[J]. Journal of Laser Applications, 2015, 28(2): 022415.
[6] Klein M, Rauch R, Spindler H, et al.Ultra high strength steels produced by thermomechanical hot rolling-advanced properties and applications[J]. BHM Berg- und Hüttenmännische Monatshefte, 2012, 157(3): 108-112.
[7] Tsuyama S.Thick plate technology for the last 100 years: A world leader in thermo mechanical control process[J]. ISIJ International, 2015, 55(1): 67-78.
[8] Krauss G.Steels: Processing, Structure, and Performance (Second Edition)[M]. Ohio, ASM International, 2015: 456-462.
[9] Zadeh A A, Pirlari A J, Barzegari M.Tempered martensite embrittlement in a 32NiCrMoV125 steel[J]. Journal of Materials Engineering and Performance, 2005, 14(5): 569-573.
[10] Yen H W, Chiang M H, Lin Y C, et al.High-temperature tempered martensite embrittlement in quenched-and-tempered offshore steels[J]. Metals, 2017, 7(7): 253.
[11] Eliaz N, Shachar A, Tal B, et al.Characteristics of hydrogen embrittlement, stress corrosion cracking and tempered martensite embrittlement in high-strength steels[J]. Engineering Failure Analysis, 2002, 9(2): 167-184.
[12] Bhadeshia H, Honeycombe R.Steels: Microstructure and Properties (Fourth Edition)[M]. Oxford, Elsevier Ltd, 2017: 241-243.
[13] Ohmura T, Hara T, Tsuzaki K.Evaluation of temper softening behavior of Fe-C binary martensitic steels by nanoindentation[J]. Scripta Materialia, 2003, 49(12): 1157-1162.

[1]	王英虎, 郑淮北, 刘庭耀, 宋令玺, 白青青. 固溶处理对53Cr21Mn9Ni4N耐热钢组织及碳化物的影响[J]. 金属热处理, 2022, 47(4): 39-45.
[2]	王琪, 吴光亮. 回火温度对1100 MPa级高强钢组织与性能的影响[J]. 金属热处理, 2022, 47(4): 146-150.
[3]	戴建科, 韩顺, 厉勇, 刘宪民, 王春旭, 庞学东, 李建新. 航空齿轮钢C69高温渗碳后的组织性能[J]. 金属热处理, 2022, 47(4): 219-225.
[4]	苏勇, 王帅, 王吉星, 于兴福, 刘洪秀, 刘金玲. 复合化学热处理对G13Cr4Mo4Ni4V钢组织和硬度的影响[J]. 金属热处理, 2022, 47(4): 226-230.
[5]	吴方俊, 邓小云, 揭晓华, 郑开宏, 骆智超. 热作模具用H13和Dievar钢的热疲劳性能[J]. 金属热处理, 2022, 47(3): 165-172.
[6]	李阔, 孙明月, 徐斌, 李殿中. 稀土H13模具钢横向冲击性能影响因素分析[J]. 金属热处理, 2022, 47(3): 181-185.
[7]	杨玉川, 李巍, 熊勇. 1Cr17Ni2钢制操纵盒小轴断裂原因分析[J]. 金属热处理, 2022, 47(3): 261-265.
[8]	戴彦璋, 韩顺, 厉勇, 周敏, 王春旭. 回火温度对新一代传动齿轮钢C61组织及性能的影响[J]. 金属热处理, 2022, 47(1): 49-55.
[9]	李亮军, 张家敏, 迟宏宵, 周健. Co微合金化对M2高速钢组织和性能的影响[J]. 金属热处理, 2022, 47(1): 73-78.
[10]	邓彪, 陈蓬, 王国栋. 回火温度对二次硬化马氏体不锈钢组织和性能的影响[J]. 金属热处理, 2021, 46(9): 65-71.
[11]	李其, 陈正宗, 蒋新亮, 刘正东, 左良. 固溶温度对改型In617合金组织和性能的影响[J]. 金属热处理, 2021, 46(8): 109-114.
[12]	庄权, 王雨田, 董智鹏. 高碳铬轴承钢网状碳化物评价标准的对比分析[J]. 金属热处理, 2021, 46(6): 27-30.
[13]	徐琛, 陈广兴, 张勇伟, 谭騛, 许晓嫦. 1.25Cr-0.5Mo钢热处理后的组织与力学性能[J]. 金属热处理, 2021, 46(6): 200-204.
[14]	保顺, 刘荣佩, 丰涵, 佴启亮, 贾建, 朱玉亮, 宋志刚. 热等静压成形FeCrAl不锈钢的组织及脆性分析[J]. 金属热处理, 2021, 46(5): 9-13.
[15]	马长文, 马龙腾, 王彦锋, 杨永达, 韩承良. 终冷温度对低屈强比复合析出强化钢组织与性能的影响[J]. 金属热处理, 2021, 46(4): 131-137.

回火温度对工程机械用超高强钢组织及回火脆性的影响

Effect of tempering temperature on microstructure and tempering embrittlement of ultra-high strength steel for construction machinery

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价