[1] 宋丽娜, 兰鹏, 刘春秀, 等. 第3代汽车用中锰钢的研究现状[J]. 钢铁研究学报, 2015, 27(7): 1-8. Song Lina, Lan Peng, Liu Chunxiu, et al.Research situation of medium manganese steel for 3rd generation automobile sheet[J]. Journal of Iron and Steel Research, 2015, 27(7): 1-8. [2] Hu B, Luo H W, Yang F, et al.Recent progress in medium-Mn steels made with new designing strategies, a review[J]. Journal of Materials Science and Technology, 2017, 33( 12): 1457-1464. [3] 田亚强, 黎旺, 郑小平, 等. 中锰TRIP钢两相区温轧退火碳化物演变行为[J]. 金属热处理, 2019, 44(4): 33-38. Tian Yaqiang, Li Wang, Zheng Xiaoping, et al.Carbide evolution behavior of medium manganese TRIP steel during intercritical warm-rolled annealing[J]. Heat Treatment of Metals, 2019, 44(4): 33-38. [4] 田浩亮, 刘云峰, 张平, 等. 合金化奥氏体中锰钢的研发与耐磨性能[J]. 金属热处理, 2013, 38(2): 30-34. Tian Haoliang, Liu Yunfeng, Zhang Ping, et al.Research and development of alloyed austenite medium manganese steel and its impact abrasive wear resistance[J]. Heat Treatment of Metals, 2013, 38(2): 30-34. [5] Yan N, Di H, Misra R D K, et al. Enhancing austenite stability in a new medium-Mn steel by combining deep cryogenic treatment and intercritical annealing: An experimental and theoretical study[J]. Materials Science and Engineering A, 2019, 753: 11-21. [6] 李岩, 蔡旭东, 赵增武, 等. 临界区退火对热轧中锰TRIP钢P偏聚的影响[J]. 钢铁研究学报, 2018, 30(11): 894-899. Li Yan, Cai Xudong, Zhao Zengwu, et al.Effects of intercritical annealing on phosphorus segregation in hot-rolled medium-manganese TRIP steel[J]. Journal of Iron and Steel Research, 2018, 30(11): 894-899. [7] Shi J, Cao W Q, Dong H. Ultrafine grained high strength low alloy steel with high strength and high ductility[J]. Materials Science Forum, 2010, 654-656(1): 238-241. [8] 曹建春, 刘清友, 雍岐龙, 等. 铌对高强度低合金钢的组织和强化机制的影响[J]. 钢铁, 2006, 41(8): 60-63. Cao Jianchun, Liu Qingyou, Yong Qilong, et al.Effect of niobium on micro-structure and strengthening mechanism of HSLA steel[J]. Iron Steel, 2006, 41(8): 60-63. [9] 苑少强, 杨善武, 武会宾, 等. 多元微合金钢中的应变诱导复合析出[J]. 北京科技大学学报, 2003, 25(5): 414-418. Yuan Shaoqiang, Yang Shanwu, Wu Huibin, et al.Strain-induced precipitation in a multi-microalloyed steel[J]. Journal of University of Science and Technology Beijing, 2003, 25(5): 414-418. [10] Moor E D, Matlock D K, Speer J G, et al.Austenite stabilization through manganese enrichment[J]. Scripta Materialia, 2011, 64(2): 185-188. [11] Kang Singon, Moor E D, Speer J G.Retained austenite stabilization through solute partitioning during intercritical annealing in C-, Mn-, Al-, Si-, and Cr-alloyed steels[J]. Metallurgical and Materials Transactions A, 2015, 46: 1005-1011. [12] Pereloma E V, Timokhina I B, Hodgson P D. Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb[J]. Materials Science and Engineering A, 1999, 273-275: 448-452. [13] 王明, 马党参, 刘振天, 等. Nb对芯棒用H13钢偏析、液析碳化物及力学性能的影响[J]. 金属学报, 2014, 50(3): 285-293. Wang Ming, MaDangshen, Liu Zhentian, et al. Effect of Nb on segregation, primary carbides and toughness of H13 steel[J]. Acta Metallurgica Sinica, 2014, 50(3): 285-293. [14] Liu L, Yang Z G, Zhang C, et al.An in situ study on austenite memory and austenitic spontaneous recrystallization of a martensitic steel[J]. Materials Science and Engineering A, 2010, 527(27/28): 7204-7209. [15] 杨佩儒, 杨重远, 朱贵星, 等. 初始组织对一种Nb-Mo微合金化中锰TRIP钢组织演变与力学性能的影响[J]. 材料与冶金学报, 2018, 17(2): 138-145. Yang Peiru, Yang Zhongyuan, Zhu Guixing, et al.Influence of initial microstructure on microstructural evolution and mechanical properties of a cold-rolled Nb-Mo microalloyed medium Mn steel[J]. Journal of Materials and Metallurgy, 2018, 17(2): 138-145. [16] 周开春, 赵爱民, 尹鸿祥, 等. 贝氏体等温温度对0.2C-1.5Si-2Mn-0.43Cu-0.26Ni TRIP钢组织和性能的影响[J]. 材料热处理学报, 2015, 36(10): 128-133. Zhou Kaichun, Zhao Aimin, Yin Hongxiang, et al.Effect of bainite isothermal temperature on microstructure and properties of 0.2C-1.5Si-2Mn-0.43Cu-0.26Ni TRIP steel[J]. Transactions of Materials and Heat Treatment, 2015, 36(10): 128-133. |