回火温度对40CrNiMo调质钢CMT堆焊HAZ组织性能的影响

doi:10.13251/j.issn.0254-6051.2021.05.016

金属热处理 ›› 2021, Vol. 46 ›› Issue (5): 99-103.DOI: 10.13251/j.issn.0254-6051.2021.05.016

回火温度对40CrNiMo调质钢CMT堆焊HAZ组织性能的影响

王靖博¹, 连明洋¹, 付雅迪¹, 刘胜新¹, 黄智泉², 陈永¹

1.郑州大学材料科学与工程学院, 河南郑州 450001;
2.郑州机械研究所有限公司, 河南郑州 450001

收稿日期:2020-10-18 出版日期:2021-05-25 发布日期:2021-07-21
通讯作者: 陈永,教授,E-mail:cheny66@zzu.edu.cn
作者简介:王靖博(1997—),男,硕士研究生,主要研究方向为先进金属材料及加工新技术,E-mail:wangjingbo246@163.com。
基金资助:
郑州市重大科技创新专项项目(188PCXZX784)

Effect of tempering temperature on HAZ microstructure and properties of CMT welded 40CrNiMo quenched and tempered steel

Wang Jingbo¹, Lian Mingyang¹, Fu Yadi¹, Liu Shengxin¹, Huang Zhiquan², Chen Yong¹

1. School of Materials Science and Engineering, Zhengzhou University, Zhengzhou Henan 450001, China;
2. Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou Henan 450001, China

Received:2020-10-18 Online:2021-05-25 Published:2021-07-21

摘要/Abstract

摘要： 针对海洋钻井平台齿轮的修复问题,采用冷金属过渡(CMT)技术在40CrNiMo调质钢表面进行堆焊,利用扫描电镜、显微硬度测试、冲击性能测试和拉伸性能测试等手段,研究了焊后回火温度对40CrNiMo调质钢堆焊热影响区(HAZ)组织和性能的影响。结果表明:随着焊后回火温度的升高,焊接热影响区的硬度逐渐下降,堆焊试样的抗拉强度逐渐下降,伸长率逐渐提高。焊后回火温度为400 ℃和500 ℃时,析出的碳化物在马氏体的条界、束界和晶界上分布,恶化了堆焊试样的冲击性能;焊后回火温度为600 ℃时,碳化物聚集长大和球化,并愈发弥散分布,从而改善了冲击性能。

关键词: 40CrNiMo调质钢, 热影响区, 焊后回火, 显微组织, 力学性能

Abstract: In order to repair the marine drilling platform gear, 40CrNiMo quenched and tempered steel was surfacing welded by cold metal transfer (CMT) technology. Effects of post-welding tempering temperature on HAZ microstructure and properties of the 40CrNiMo quenched and tempered steel were investigated via the characterization methods such as scanning electron microscope (SEM), microhardness test, impact test and tensile test. The results show that with the increase of post-welding tempering temperature, both the microhardness of the HAZ and the tensile strength of the welded specimen decrease, while the elongation increases gradually. When tempered at 400 ℃ and 500 ℃, the precipitated carbides are distributed on the lath boundary, block boundary and grain boundary of martensite, which worsens the impact property of the welded specimens. When tempered at 600 ℃, the carbides are aggregated, spheroidized, and distributed more dispersedly, so that the impact property is improved.

Key words: 40CrNiMo quenched and tempered steel, heat affected zone, post-welding tempering, microstructure, mechanical properties

中图分类号:

TG156.5

王靖博, 连明洋, 付雅迪, 刘胜新, 黄智泉, 陈永. 回火温度对40CrNiMo调质钢CMT堆焊HAZ组织性能的影响[J]. 金属热处理, 2021, 46(5): 99-103.

Wang Jingbo, Lian Mingyang, Fu Yadi, Liu Shengxin, Huang Zhiquan, Chen Yong. Effect of tempering temperature on HAZ microstructure and properties of CMT welded 40CrNiMo quenched and tempered steel[J]. Heat Treatment of Metals, 2021, 46(5): 99-103.

参考文献

[1]曹勇. 2040年世界能源展望——埃克森美孚2018版预测报告解读[J]. 当代石油石化, 2018, 26(4): 8-14.
Cao Yong. A brief introduction to Exxon Mobil 2018 outlook for energy to 2040[J]. Contemporary Petroleum and Petrochemical, 2018, 26(4): 8-14.
[2]谢和平, 吴立新, 郑德志. 2025年中国能源消费及煤炭需求预测[J]. 煤炭学报, 2019, 44(7): 1949-1960.
Xie Heping, Wu Lixin, Zheng Dezhi. Prediction on the energy consumption and coal demand of China in 2025[J]. Journal of China Coal Society, 2019, 44(7): 1949-1960.
[3]成志杰. 中国海洋战略的概念内涵与战略设计[J]. 亚太安全与海洋研究, 2017(6): 26-41.
Cheng Zhijie. China's ocean strategy: Concept and strategy[J]. Asia-Pacific Security and Maritime Affairs, 2017(6): 26-41.
[4]黎剑波. 激光熔焊技术在海洋钻井平台齿轮修理上的应用研究[J]. 中国修船, 2012, 25(3): 39-42.
Li Jianbo. Research on application of laser fusion welding technology in gear repair of offshore drilling platform[J]. China Ship Repair, 2012, 25(3): 39-42.
[5]董凯. 激光熔覆技术在海洋自升式钻井平台升降齿轮修复中的应用实例[J]. 中国石油和化工标准与质量, 2018, 38(20): 150-151.
Dong Kai. Application examples of laser cladding technology in the repair of lifting gears of marine jack-up drilling platforms[J]. China Petroleum and Chemical Standard and Quality, 2018, 38(20): 150-151.
[6]马志鹏, 张誉喾, 张旭昀, 等. 35CrMo齿轮堆焊接头组织与力学性能分析[J]. 化工机械, 2017, 44(3): 271-275, 327.
Ma Zhipeng, Zhang Yuku, Zhang Xuyun, et al. Analysis of microstructures and mechanical properties of 35CrMo gear overlaying joint[J]. Chemical Machinery, 2017, 44(3): 271-275, 327.
[7]常晓巍. 直齿轮联合堆焊在线修复[J]. 山东工业技术, 2018(9): 12.
Chang Xiaowei. On-line repair of spur gear combined surfacing welding[J]. Shandong Industrial Technology, 2018(9): 12.
[8]刘璇, 赵刚, 李大航, 等. 热处理工艺对510 MPa级船板用钢组织及性能的影响[J]. 金属热处理, 2021, 46(1): 61-64.
Liu Xuan, Zhao Gang, Li Dahang, et al. Effect of heat treatment process on microstructure and properties of 510 MPa grade ship steel[J]. Heat Treatment of Metals, 2021, 46(1): 61-64.
[9]张蕾, 李亚江, 蒋庆磊. 淬火+回火低合金高强钢焊接的研究现状[J]. 现代焊接, 2010(10): 17-21.
Zhang Lei, Li Yajiang, Jiang Qinglei. Present situation of study on the welding of quenching+tempering low-alloy and high-strength steel[J]. Modern Welding Technology, 2010(10): 17-21.
[10]史献营. 中碳调质钢焊接中的问题及工艺措施[J]. 新技术新工艺, 2015(7): 134-136.
Shi Xianying. Welding problems and process measures of the medium carbon quenched and tempered steel[J]. New Technology and New Process, 2015(7): 134-136.
[11]付海峰, 李俏, 徐跃明, 等. 重载齿轮热处理及应用[J]. 金属热处理, 2020, 45(3): 178-185.
Fu Haifeng, Li Qiao, Xu Yueming, et al. Heat treatment technologies and its application of heavy duty gears[J]. Heat Treatment of Metals, 2020, 45(3): 178-185.
[12]薄国公, 王勇, 韩涛, 等. 焊后热处理对ASTM 4130钢焊接热影响区组织与性能的影响[J]. 金属热处理, 2011, 36(2): 83-87.
Bo Guogong, Wang Yong, Han Tao, et al. Effect of post-weld heat treatment on microstructure and mechanical properties of HAZ of ASTM 4130 steel[J]. Heat Treatment of Metals, 2011, 36(2): 83-87.
[13]Zhao M S, Chiew S P, Lee C K. Post weld heat treatment for high strength steel welded connections[J]. Journal of Constructional Steel Research, 2016, 122: 167-177.
[14]刘庆冬, 刘文庆, 王泽民, 等. 回火马氏体中合金碳化物的3D原子探针表征Ⅰ. 形核[J]. 金属学报, 2009, 45(11): 1281-1287.
Liu Qingdong, Liu Wenqing, Wang Zemin, et al. 3D atom probe characterization of alloy carbides in tempered martensite I. Nucleation[J]. Acta Metallurgica Sinica, 2009, 45(11): 1281-1287.
[15]赵乃勤. 合金固态相变[M]. 长沙: 中南大学出版社, 2008.
Zhao Naiqin. Solid Phase Transformation in Alloys[M]. Changsha: Central South University Press, 2008.
[16]Bott I D S, Teixeira J C G. Toughness evaluation of a shielded metal arc carbon-manganese steel welded joint subjected to multiple post weld heat treatment[J]. Journal of Materials Engineering and Performance, 1999, 8(6): 683-692.
[17]Li J, Zhang C, Liu Y. Influence of carbides on the high-temperature tempered martensite embrittlement of martensitic heat-resistant steels[J]. Materials Science and Engineering A, 2016, 670: 256-263.
[18]文明月. 焊接热循环对Fe-Cr-Ni-Mo系高强钢组织与力学性能的影响[D]. 合肥: 中国科学技术大学, 2018.
Wen Mingyue. Effect of welding thermal cycle on the microstructure and properties of Fe-Cr-Ni-Mo high strength steel[D]. Hefei: University of Science and Technology of China, 2018.

回火温度对40CrNiMo调质钢CMT堆焊HAZ组织性能的影响

Effect of tempering temperature on HAZ microstructure and properties of CMT welded 40CrNiMo quenched and tempered steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张子延, 陈君, 陈晓亚, 李全安, 刘建鑫. 固溶时效处理对Mg-4Sm-3Gd-0.5Zr合金显微组织和耐蚀性能的影响[J]. 金属热处理, 2022, 47(4): 10-16.
[2]	梁恩溥, 徐乐, 杨勇, 王毛球. 添加Al、Cu对40CrNi3MoV钢组织和力学性能的影响[J]. 金属热处理, 2022, 47(4): 17-23.
[3]	祁晓亮, 李岩, 定巍, 赵增武. 含Al中锰TRIP钢原始组织对临界退火后组织与力学性能的影响[J]. 金属热处理, 2022, 47(4): 24-29.
[4]	陈保安, 张静媛, 祝志祥, 韩钰, 潘学东, 张磊, 陈素红. 化学成分对高强Al-Mg-Si合金组织和性能的影响[J]. 金属热处理, 2022, 47(4): 30-38.
[5]	陈连生, 张露友, 田亚强, 杨子旋, 李红斌, 潘红波, 魏英立. 低碳高强舰船用钢的CCT曲线及其组织性能[J]. 金属热处理, 2022, 47(4): 63-68.
[6]	王云龙, 余伟, 张昳, 史佳新, 李明辉. 奥氏体化温度对贝氏体钢等温转变及力学性能的影响[J]. 金属热处理, 2022, 47(4): 80-85.
[7]	骆再斌, 范子泽, 彭振. 轻质高熵合金的研究进展[J]. 金属热处理, 2022, 47(4): 100-107.
[8]	吕杰晟, 宋志刚, 何建国, 丰涵, 郑文杰, 朱玉亮. S32205双相不锈钢冷轧退火组织转变及强塑化机理分析[J]. 金属热处理, 2022, 47(4): 141-145.
[9]	王琪, 吴光亮. 回火温度对1100 MPa级高强钢组织与性能的影响[J]. 金属热处理, 2022, 47(4): 146-150.
[10]	孙凯, 陈研, 杨绍斌. 时效温度对激光选区熔化TC21钛合金微观组织及硬度的影响[J]. 金属热处理, 2022, 47(4): 155-158.
[11]	张骥俊, 邢彦锋, 曹菊勇. 超声振动对CMT电弧增材制造铝合金组织与性能的影响[J]. 金属热处理, 2022, 47(4): 159-164.
[12]	刘文彬, 乔龙阳, 潘新宇, 程格, 李爱娜, 裴新军. 淬火温度对刀剪用M390粉末冶金不锈钢组织和性能的影响[J]. 金属热处理, 2022, 47(4): 189-195.
[13]	王瑞琴, 葛鹏, 廖强, 侯鹏, 刘宇. 固溶冷却方式对短时用高温钛合金板材组织和性能的影响[J]. 金属热处理, 2022, 47(4): 196-198.
[14]	王绍灼, 孟晗, 王芬, 樊海卫, 李燕, 唐超. 改善低氧TC4-LC及重熔TC4钛合金性能的热处理工艺[J]. 金属热处理, 2022, 47(4): 204-207.
[15]	陈强, 陈林芳, 杨明华. 18CrNiMo7-6钢的可控气氛高温渗碳工艺[J]. 金属热处理, 2022, 47(4): 231-239.