GH141合金的凝固偏析特性及均匀化处理

doi:10.13251/j.issn.0254-6051.2022.05.023

金属热处理 ›› 2022, Vol. 47 ›› Issue (5): 141-147.DOI: 10.13251/j.issn.0254-6051.2022.05.023

GH141合金的凝固偏析特性及均匀化处理

肖东平^1,2, 周扬^1,2, 付建辉^1,2, 杨浩笛^1,2

1.成都先进金属材料产业技术研究院股份有限公司, 四川成都 610000;
2.海洋装备用金属材料及其应用国家重点实验室, 辽宁鞍山 114009

收稿日期:2021-12-12 修回日期:2022-03-26 出版日期:2022-05-25 发布日期:2022-06-16
作者简介:肖东平(1987—),男,工程师,硕士,主要研究方向为变形高温合金,E-mail: xiaodpnew@163.com

Solidification segregation characteristic and homogenization treatment of GH141 superalloy

Xiao Dongping^1,2, Zhou Yang^1,2, Fu Jianhui^1,2, Yang Haodi^1,2

1. Chengdu Institute of Advanced Metallic Material Technology and Industry Co., Ltd., Chengdu Sichuan 610000, China;
2. State Key Laboratory of Metal Material for Marine Equipment and Application, Anshan Liaoning 114009, China

Received:2021-12-12 Revised:2022-03-26 Online:2022-05-25 Published:2022-06-16

摘要/Abstract

摘要： 利用光学显微镜、扫描电镜及能谱分析仪分析了经真空感应+真空自耗冶炼的GH141合金自耗锭的铸态组织及凝固偏析特性,并研究了均匀化处理温度和时间对GH141合金微观组织、析出相、元素偏析情况的影响规律。结果表明,GH141合金铸锭存在明显枝晶偏析,Ti、Mo偏聚于枝晶间,Al、Co、Cr偏聚于枝晶干;枝晶间主要析出相为MC和M₆C+M₂₃C₆碳化物。在均匀化过程中,随着均匀化温度的升高和时间的延长,枝晶组织消除、碳化物回溶、偏析元素逐渐扩散均匀;经1190 ℃×48 h均匀化处理后,合金成分基本均匀,大部分碳化物已回溶。

关键词: GH141合金, 偏析, 均匀化, 微观组织, 碳化物

Abstract: Segregation characteristics and microstructure of the as-cast GH141 superalloy ingot prepared by vacuum induction melting (VIM) and vacuum arc remelting (VAR) were investigated by means of optical microscope (OM), scanning electron microscope and energy dispersive spectroscopy (EDS). Meanwhile, the effect of homogenization temperature and time on evolution of microstructure, precipitates and segregation of the GH141 superalloy was also studied. The results show that the as-cast GH141 alloy exhibits dendritic segregation, in which Ti and Mo are segregated to the interdendritic regions, while Al, Co and Cr are segregated to the dendrites. The main precipitates are MC, M₆C and M₂₃C₆ carbides in interdendritic regions. With the increase of homogenizing temperature and holding time, dendrite structure is eliminated, carbides are redissolved and segregation elements are gradually distributed evenly by diffusion. It is found that the element segregation is basically eliminated and most of the carbides are redissolved in the GH141 alloy after homogenization at 1190 ℃ for 48 h.

Key words: GH141 alloy, segregation, homogenization, microstructure, carbides

中图分类号:

肖东平, 周扬, 付建辉, 杨浩笛. GH141合金的凝固偏析特性及均匀化处理[J]. 金属热处理, 2022, 47(5): 141-147.

Xiao Dongping, Zhou Yang, Fu Jianhui, Yang Haodi. Solidification segregation characteristic and homogenization treatment of GH141 superalloy[J]. Heat Treatment of Metals, 2022, 47(5): 141-147.

参考文献

[1]沈道贵. GH141高强度高温合金[J]. 宇航材料工艺, 1985(6): 5-10.
Shen Daogui. GH141 high strength superalloy[J]. Aerospace Materials and Technology, 1985(6): 5-10.
[2]《中国航空材料手册》编辑委员会. 中国航空材料手册[M]. 北京: 中国标准出版社, 2002: 399.
[3]于慧臣, 谢世殊, 赵光普, 等. GH141合金的高温拉伸及持久性能[J]. 材料工程, 2003(9): 3-6.
Yu Huichen, Xie Shishu, Zhao Guangpu, et al. High temperature tensile and creep rupture properties in Ni-based superalloy GH141[J]. Journal of Materials Engineering, 2003(9): 3-6.
[4]徐敏, 杨武强, 张斌, 等. 镍基高温合金GH141平衡析出相的热力学计算分析[J]. 稀有金属材料与工程, 2016, 45(11): 2926-2931.
Xu Min, Yang Wuqiang, Zhang Bin, et al. Thermodynamic calculation of equilibrium precipitation phases in GH141 Ni-based superalloy[J]. Rare Metal Materials and Engineering, 2016, 45(11): 2926-2931.
[5]赵炳堃, 赵光普, 吕桂芝. 高温均匀化热处理对难变形GH141合金锭热塑性的影响[J]. 钢铁研究学报, 1989, 1(2): 47-53.
Zhao Binkun, Zhao Guangpu, Lü Guizhi. Thermoplasticity of hard deformative Ni-base alloy GH141 ingot after high temperature homogenization[J]. Journal of Iron and Steel Research, 1989, 1(2): 47-53.
[6]仲增墉, 庄景云. 变形高温合金生产工艺中几个重要问题的研究和进展[J]. 钢铁研究学报, 2003, 15(7): 1-9.
Zhong Zengyong, Zhuang Jingyun. Develop of several important problems on producing technologies of wrought superalloy[J]. Journal of Iron and Steel Research, 2003, 15(7): 1-9.
[7]董建新, 李林翰, 李浩宇, 等. 高温合金铸锭均匀化程度对开坯热变形的再结晶影响[J]. 金属学报, 2015, 51(10): 1207-1218.
Dong Jianxin, Li Linhan, Li Haoyu, et al. Effect of extent of homogenization on the hot deformation recrystallization of superalloy ingot in cogging process[J]. Acta Metallurgica Sinica, 2015, 51(10): 1207-1218.
[8]李阳, 李莎, 曾莉, 等. GH4700合金偏析行为及均匀化过程中元素分配的规律[J]. 材料热处理学报, 2013, 34(6): 52-57.
Li Yang, Li Sha, Zeng Li, et al. Microsegregation behavior and element distribution during homogenizing in GH4700 alloy[J]. Transactions of Materials and Heat Treatment, 2013, 34(6): 52-57.
[9]梁艳, 马超, 李春颜. GH141高温合金的热加工工艺[J]. 金属热处理, 2012, 37(10): 105-107.
Liang Yan, Ma Chao, Li Chunyan. Hot working process of superalloy GH141[J]. Heat Treatment of Metals, 2012, 37(10): 105-107.
[10]刘雅晶, 杨洪才, 袁英. GH141合金碳化物及γ′的沉淀[J]. 特殊钢, 1996, 17(6): 12-16.
Liu Yajing, Yang Hongcai, Yuan Ying. Carbides and γ′ precipitated in alloy GH141[J]. Special Steel, 1996, 17(6): 12-16.
[11]刘瑾, 赵志毅. 一次时效处理对GH141 焊后应力变化及碳化物分布的影响[J]. 材料热处理学报, 2017, 38(2): 66-71.
Liu Jin, Zhao Zhiyi. Effects of primary aging on stress variation and carbide distribution of GH141 superalloy after welding[J]. Transactions of Materials and Heat Treatment, 2017, 38(2): 66-71.
[12]潘晓林, 孙文儒, 李站, 等. 铸态GH742合金的凝固特点及枝晶偏析[J]. 稀有金属材料与工程, 2010, 39(1): 55-59.
Pan Xiaolin, Sun Wenru, Li Zhan, et al. Solidification characteristics and dendritic segregation of as-cast GH742 alloys[J]. Rare Metal Materials and Engineering, 2010, 39(1): 55-59.
[13]魏志坚, 陈爱成. GHl41合金轧环加热曲线的研究[J]. 钢铁研究学报, 2003, 15(7): 380-382.
Wei Zhijian, Chen Aicheng. Study on heating curve of forged ring for GHl41 alloy[J]. Journal of Iron and Steel Research, 2003, 15(7): 380-382.
[14]冶军. 美国镍基高温合金[M]. 北京: 国防工业出版社, 1987.
[15]向雪梅, 江河, 董建新, 等. 难变形高温合金GH4975的铸态组织及均匀化[J]. 金属学报, 2020, 56(7): 988-996.
Xiang Xuemei, Jiang He, Dong Jianxin, et al. As-cast microstructure characteristic and homogenization of a newly developed hard-deformed Ni-based superalloy GH4975[J]. Acta Metallurgica Sinica, 2020, 56(7): 988-996.
[16]Semiatin S L, Kramb R C, Turner R E, et al. Analysis of the homogenization of a nickel-base superalloy[J]. Scripta Materialia, 2004, 51(6): 491-495.
[17]田玉亮, 王玲, 董建新, 等. GH742铸锭偏析及均匀化过程中元素分布规律[J]. 稀有金属材料与工程, 2006, 35(8): 1315-1318.
Tian Yuliang, Wang Lin, Dong Jianxin, et al. Microsegregation of GH742 ingot and the element distribution during homogenizing treatment[J]. Rare Metal Materials and Engineering, 2006, 35(8): 1315-1318.
[18]梅声勇, 郑磊, 蒙肇斌, 等. GH105合金铸锭元素偏析和均匀化工艺[J]. 北京科技大学学报, 2009, 31(6): 714-718.
Mei Shengyong, Zheng Lei, Meng Zhaobin, et al. Microsegregation and homogenization of GH105 superalloy ingots[J]. Journal of University of Science and Technology Beijing, 2009, 31(6): 714-718.
[19]Miao Zhujun, Shan Aidang, Wu Yuanbiao, et al. Quantitative analysis of homogenization treatment of INCONEL 718 superalloy[J]. Transactions of Nonferrous Metals Society of China, 2011(21): 1009-1017.

GH141合金的凝固偏析特性及均匀化处理

Solidification segregation characteristic and homogenization treatment of GH141 superalloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	赵堃, 蒋鹏, 王虎虎, 王博, 王沛锦, 杨兴中. (FeCoNiCr)_100-xMn_x高熵合金在NaCl和NaOH溶液中的抗腐蚀性能[J]. 金属热处理, 2022, 47(5): 40-46.
[2]	赵思杰, 李航, 牛利冲, 李杰, 冯运莉. Al含量对热轧FeMnCoCr系高熵合金组织和性能的影响[J]. 金属热处理, 2022, 47(5): 47-52.
[3]	元莎, 周乐育, 蒋鹏, 张建波, 陈浩. 乘用车用新型冷作模具钢Cr8真空气淬后的组织与性能[J]. 金属热处理, 2022, 47(5): 87-91.
[4]	苏宏东, 樊伟, 冯运莉. 退火温度对冷轧Fe-0.4C-10Mn-6Al高强钢组织与力学性能的影响[J]. 金属热处理, 2022, 47(5): 126-130.
[5]	朱旭, 陈建文, 蒋亦舟, 刘克, 罗子相, 高毅强, 向臻东. 20Cr2Ni4A钢和17Cr2Ni2MoVNb钢渗碳层的组织与性能[J]. 金属热处理, 2022, 47(5): 166-170.
[6]	张明皓, 韩颢源, 徐跃明, 李俏, 高直, 周乐育. 真空渗碳18CrNiMo7-6钢中碳化物的析出规律[J]. 金属热处理, 2022, 47(5): 171-176.
[7]	董月, 舒林森. 离焦量对MoS₂改性Fe-Cr-Mo-Si合金涂层组织与性能的影响[J]. 金属热处理, 2022, 47(5): 246-251.
[8]	王玉岱, 刘洋, 朱言言, 田象军, 程序, 冉先喆, 钱婷婷. 热处理对复合制造AerMet100超高强度钢组织均匀性与拉伸性能的影响[J]. 金属热处理, 2022, 47(4): 1-9.
[9]	陈保安, 张静媛, 祝志祥, 韩钰, 潘学东, 张磊, 陈素红. 化学成分对高强Al-Mg-Si合金组织和性能的影响[J]. 金属热处理, 2022, 47(4): 30-38.
[10]	王英虎, 郑淮北, 刘庭耀, 宋令玺, 白青青. 固溶处理对53Cr21Mn9Ni4N耐热钢组织及碳化物的影响[J]. 金属热处理, 2022, 47(4): 39-45.
[11]	陈东俊, 李广阳, 刘刚. 时效处理对AlSi9Cu3压铸铝合金组织和力学性能的影响[J]. 金属热处理, 2022, 47(4): 53-56.
[12]	杨静, 董楠, 姜周华, 韩培德. 合金元素在fcc-Fe/NbX(X=C,N)界面的偏析及影响[J]. 金属热处理, 2022, 47(4): 57-62.
[13]	李立, 曾艳, 吴晓春. 4Cr5Mo2VCo钢的热处理工艺优化[J]. 金属热处理, 2022, 47(4): 133-140.
[14]	张骥俊, 邢彦锋, 曹菊勇. 超声振动对CMT电弧增材制造铝合金组织与性能的影响[J]. 金属热处理, 2022, 47(4): 159-164.
[15]	戴建科, 韩顺, 厉勇, 刘宪民, 王春旭, 庞学东, 李建新. 航空齿轮钢C69高温渗碳后的组织性能[J]. 金属热处理, 2022, 47(4): 219-225.