输入轴的防渗碳涂料自动涂敷设备设计开发和应用

doi:10.13251/j.issn.0254-6051.2022.09.048

金属热处理 ›› 2022, Vol. 47 ›› Issue (9): 286-292.DOI: 10.13251/j.issn.0254-6051.2022.09.048

• 设备 • 上一篇

输入轴的防渗碳涂料自动涂敷设备设计开发和应用

夏晓宇, 范欣, 韦汉伟

广州丰东热炼有限公司, 广东广州 510880

收稿日期:2022-04-24 修回日期:2022-07-27 发布日期:2022-10-18
作者简介:夏晓宇(1969—),男,高级工程师,硕士,主要研究方向为金属热处理,E-mail: xiaxiao.yu@163.com

Design, development and application of automatic coating equipment with anti-carburizing paint for input shaft

Xia Xiaoyu, Fan Xin, Wei Hanwei

Guangzhou Fengdong Neturen Co. , Ltd. , Guangzhou Guangdong 510880, China

Received:2022-04-24 Revised:2022-07-27 Published:2022-10-18

摘要/Abstract

摘要： 通过设计开发输入轴防渗碳涂料自动涂敷专用设备,它可靠性、可控性、再现性、重复性、安全性、维修便捷性好,并开发出一套完整的涂敷工艺,经过反复验证,符合防渗碳范围的技术要求、重现性好。

关键词: 输入轴, 防渗碳涂料, 渗碳气氛, 自动涂敷

Abstract: A special automatic equipment for input shaft coating with anti-carburizing paint was designed and developed with good reliability, controllability, reproducibility, repeatability, safety and repairability. And a complete coating process was developed. After repeated verification, it meets the technical requirements of the anti-carburizing range and has good performance for reproducibility.

Key words: input shaft, anti-carburizing coating, atmosphere for carburizing, automatic coating

中图分类号:

TG156.8⁺1

夏晓宇, 范欣, 韦汉伟. 输入轴的防渗碳涂料自动涂敷设备设计开发和应用[J]. 金属热处理, 2022, 47(9): 286-292.

Xia Xiaoyu, Fan Xin, Wei Hanwei. Design, development and application of automatic coating equipment with anti-carburizing paint for input shaft[J]. Heat Treatment of Metals, 2022, 47(9): 286-292.

[1]	殷和平, 徐跃明, 殷敏洁, 丛培武. 工业机器人精密减速器输入轴的真空低压渗碳高压气淬工艺[J]. 金属热处理, 2022, 47(5): 177-182.
[2]	邱允城，麻文臻. 变速箱27MnCr5钢输入轴校直裂纹分析及改进措施[J]. 金属热处理, 2015, 40(3): 195-197.

输入轴的防渗碳涂料自动涂敷设备设计开发和应用

Design, development and application of automatic coating equipment with anti-carburizing paint for input shaft

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价