17CrNiMo6齿轮钢的组织均匀化

doi:10.13251/j.issn.0254-6051.2022.11.022

金属热处理 ›› 2022, Vol. 47 ›› Issue (11): 126-133.DOI: 10.13251/j.issn.0254-6051.2022.11.022

17CrNiMo6齿轮钢的组织均匀化

王杰¹, 党淑娥¹, 范子靖¹, 郭伦², 朱雪彤¹

1.太原科技大学材料科学与工程学院, 山西太原 030024;
2.重庆长征重工有限责任公司, 重庆 400083

收稿日期:2022-05-29 修回日期:2022-09-20 出版日期:2022-11-25 发布日期:2023-01-04
通讯作者: 党淑娥,教授,博士,E-mail:505358603@qq.com
作者简介:王杰(1996—),男,硕士研究生,主要研究方向为金属热处理,E-mail:2536978554@qq.com。
基金资助:
山西省研究生优秀创新项目(2020BY109)

Microstructure homogenization of 17CrNiMo6 gear steel

Wang Jie¹, Dang Shue¹, Fan Zijing¹, Guo Lun², Zhu Xuetong¹

1. School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan Shanxi 030024, China;
2. Chongqing Changzheng Heavy Industry Company, Chongqing 400083, China

Received:2022-05-29 Revised:2022-09-20 Online:2022-11-25 Published:2023-01-04

摘要/Abstract

摘要： 以17CrNiMo6齿轮钢为研究对象,通过对其锻态试样进行不同温度和不同时间的退火处理,采用光学显微镜(OM)、扫描电镜(SEM)、能谱仪(EDS)组织分析手段和Origin数据处理软件,对其带状组织形成原因以及均匀化行为进行了研究与定量分析。结果表明,C、Cr、Ni、Mn和Mo元素在珠光体+贝氏体区域的富集是17CrNiMo6齿轮钢带状组织产生的根本原因,当加热温度为1100 ℃、保温时间为11 h和加热温度为1250 ℃、保温时间为2 h以上时,带状组织已消除,但合金元素不均匀程度仍较高。当加热温度为1250 ℃、保温时间为4 h时,C、Cr、Mn、Ni、P、S、Mo的偏析系数K分别为1.02、0.98、1.02、1.02、1.01、0.98、0.98,元素分布也达到均匀。

关键词: 17CrNiMo6齿轮钢, 元素偏析, 带状组织, 均匀化行为

Abstract: Taking 17CrNiMo6 gear steel as the research object, and the forged specimens were annealed at different temperatures for different time. The formation of the banded structure and its homogenization behavior were studied and quantitatively analyzed by means of optical microscope, scanning electron microscope, energy dispersive spectrometer and data processing software Origin. The results show that the enrichment of C, Cr, Ni, Mn and Mo in the pearlite+bainite region is the root cause of the band structure of the 17CrNiMo6 gear steel. When the heating temperature is 1100 ℃ with the holding time of 11 h, or the heating temperature is 1250 ℃ with the holding time being more than 2 h, the banded structure is eliminated, but the non-uniformity of alloy elements is still high. When the heating temperature is 1250 ℃ and the holding time is 4 h, the segregation coefficients K for C, Cr, Mn, Ni, P, S, Mo are 1.02, 0.98, 1.02, 1.02, 1.01, 0.98, and 0.98, respectively, and the element distribution is also uniform.

Key words: 17CrNiMo6 gear steel, element segregation, banded structure, homogenization behavior

中图分类号:

TG156.2

王杰, 党淑娥, 范子靖, 郭伦, 朱雪彤. 17CrNiMo6齿轮钢的组织均匀化[J]. 金属热处理, 2022, 47(11): 126-133.

Wang Jie, Dang Shue, Fan Zijing, Guo Lun, Zhu Xuetong. Microstructure homogenization of 17CrNiMo6 gear steel[J]. Heat Treatment of Metals, 2022, 47(11): 126-133.

参考文献

[1]金荣植. 常用Cr-Ni-Mo系钢齿轮的热处理工艺[J]. 金属加工(热加工), 2014(5): 26-27, 20, 22, 24.
[2]王爱香, 高金柱, 顾敏. 新型高合金齿轮渗碳钢17CrNiMo6的热处理[J]. 金属热处理, 2010, 35(10): 82-86.
Wang Aixiang, Gao Jinzhu, Gu Min. Heat treatment of new type high alloy carburizing gear steel 17CrNiMo6[J]. Heat Treatment of Metals, 2010, 35(10): 82-86.
[3]George Krauss. Solidification, segregation, and banding in carbon and alloy steels[J]. Metallurgical and Materials Transactions B, 2003, 34(6): 781-792.
[4]Yang Chao, Min Yongan, Sun Hongping, et al. Study of identifying the banded structure of 8620 steel bars[J]. Advanced Materials Research, 2014, 915-916: 643-649.
[5]Eric D I, Jagle A. Modelling of microstructural banding during transformations in steel[D]. London: University of Cambridge, 2007.
[6]徐尚呈, 周立新, 雷应华, 等. G20CrNi2MoA带状组织的形成机制及消除方法[J]. 物理测试, 2012, 30(5): 18-22.
Xu Shangcheng, Zhou Lixin, Lei Yinghua, et al. G20CrNi2MoA banded structure formation mechanism and methods to eliminate[J]. Physics Examination and Testing, 2012, 30(5): 18-22.
[7]曹杰瑞, 徐文博, 闫来平, 等. 18CrNiMo7-6齿轮钢一次带状组织特征[J]. 金属热处理, 2019, 44(3): 16-21.
Cao Jierui, Xu Wenbo, Yan Laiping, et al. As-cast banded structure characteristics of 18CrNiMo7-6 gear steel[J]. Heat Treatment of Metals, 2019, 44(3): 16-21.
[8]赵永杰. 18CrNiMo7-6钢锭凝固组织优化技术研究[D]. 大连: 大连理工大学, 2019.
Zhao Yongjie. Optimization technology of solidification structure of 18CrNiMo7-6 steel ingot[D]. Dalian: Dalian University of Technology, 2019.
[9]张延玲, 刘海英, 阮小江, 等. 中低碳齿轮钢中合金元素的偏析行为及其对带状组织的影响[J]. 北京科技大学学报, 2009, 31(S1): 199-206.
Zhang Yanling, Liu Haiying, Ruan Xiaojiang, et al. Microsegregation behaviors of alloy elements and their effects on the formation of banded structure in pinion steels[J]. Journal of University of Science and Technology Beijing, 2009, 31(S1): 199-206.
[10]孙晓冉, 丁辉, 孙岩, 等. 冷却速度对抽油杆用NiCrMnMoV钢过冷奥氏体转变的影响[J]. 金属热处理, 2019, 44(11): 163-166.
Sun Xiaoran, Ding Hui, Sun Yan, et al. Effect of cooling rate on supercooled austenite transformation of NiCrMnMoV steel for sucker rod[J]. Heat Treatment of Metals, 2019, 44(11): 163-166.
[11]Grossterlinden R, Kawalla R, Lotter U. Formation of pearlitic banded structures in ferritic-pearlitic steels[J]. Steel Research, 1992, 63(8): 331.
[12]Thompson W S, Howell R P. Factors influencing ferrite/pearlite banding and origin of large pearlite nodules in a hypoeutectoid plate steel[J]. Materials Science and Technology, 1992(8): 777.
[13]Kirkaldy J S, Destinonforstmann J V, Brigham R J. Simulation of banding in steels[J]. Canadian Metallurgical Quarterly, 1962(1): 59.
[14]Zhao Yina, Chen Yinli, Wei He, et al. The role of elements partition and austenite grain size in the ferrite-bainite banding formation during hot rolling[J]. Materials, 2021, 14(9): 2356.
[15]王晓敏. 工程材料学[M]. 哈尔滨: 哈尔滨工业大学出版社, 2005: 6-10.
[16]蔡珍, 黄运华, 张跃, 等. 冷却速度对铁素体-珠光体带状组织的影响机制[J]. 钢铁研究学报, 2012, 24(6): 25-30.
Cai Zhen, Huang Yunhua, Zhang Yue, et al. Mechanism of effect of cooling rate on ferrite/pearlite banded structure[J]. Journal of Iron and Steel Research, 2012, 24(6): 25-30.
[17]杨少朋, 尉文超, 胡芳忠, 等. 低碳齿轮钢18CrNiMo7-6奥氏体晶粒度长大规律[J]. 材料导报, 2021, 35(8): 8179-8183.
Yang Shaopeng, Yu Wenchao, Hu Fangzhong, et al. The austenite grain growth behavior of low carbon gear steel 18CrNiMo7-6[J]. Materials Reports, 2021, 35(8): 8179-8183.
[18]章守华. 合金钢[M]. 北京: 冶金工业出版社, 1981: 1-8.
[19]刘鑫刚, 聂绍珉, 任运来. Cr-Mo系低合金钢锻前高温扩散工艺的实验研究[J]. 塑性工程学报, 2007(5): 141-144.
Liu Xingang, Nie Shaomin, Ren Yunlai. Experimental study on diffusion annealing before forging of Cr-Mo low-alloy steel[J]. Journal of Plasticity Engineering, 2007(5): 141-144.
[20]方鸿生, 徐平光, 白秉哲, 等. 一种新的复相组织—仿晶界型铁素体/粒状贝氏体[J]. 金属热处理, 2000, 25(11): 1-5.
Fang Hongsheng, Xu Pingguang, Bai Bingzhe, et al. A new duplex microstructure-grain boundary allotriomorphic ferrite/granular bainite[J]. Heat Treatment of Metals, 2000, 25(11): 1-5.

17CrNiMo6齿轮钢的组织均匀化

Microstructure homogenization of 17CrNiMo6 gear steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价

[1]	程源, 胡芳忠, 杨少朋, 汪开忠, 金国忠, 陈世杰, 王良林. 汽车前轴用40Cr钢锻件开裂失效分析[J]. 金属热处理, 2021, 46(12): 294-297.
[2]	袁睿, 潘中德, 武会宾. 正火工艺对420 MPa级海上风电用钢板组织及性能的影响[J]. 金属热处理, 2021, 46(10): 112-116.
[3]	苏醒, 史松宜, 吕旭东. GH4738合金高温扩散退火工艺[J]. 金属热处理, 2020, 45(10): 48-53.
[4]	刘丹, 陈广兴, 徐琛, 许晓嫦. 热处理工艺对15CrMoR钢带状组织和冲击性能的影响[J]. 金属热处理, 2020, 45(10): 124-128.
[5]	王长健. 45钢锥套淬火裂纹失效分析[J]. 金属热处理, 2017, 42(4): 204-207.
[6]	贺凯林. Cr12模具断裂失效分析[J]. 金属热处理, 2016, 41(9): 182-184.
[7]	李玉红. Q345R钢热成型封头带状组织的成因和消除[J]. 金属热处理, 2016, 41(5): 200-202.
[8]	柳洋波，佟倩，孙齐松，丁宁，温娟. 利用合金元素偏析显示齿轮钢连铸坯枝晶的方法[J]. 金属热处理, 2016, 41(12): 178-181.
[9]	宋进英，齐祥羽，陈连生，田亚强，张健杨. 40Mn钢链片断裂原因分析及改进措施[J]. 金属热处理, 2015, 40(9): 209-214.
[10]	郭亚婷1，王福明1，黄泉金1,2，李茂旺3，吕昆1. 510L钢汽车大梁冷弯开裂研究[J]. 金属热处理, 2015, 40(6): 190-194.
[11]	王海军, 王建军, 常立忠, 周俐, 从俊强, 蒙李朋. 超声波对GCr15钢凝固组织与性能的影响[J]. 金属热处理, 2014, 39(6): 53-57.
[12]	欧阳剑雄, 闵永安, 邵光杰, 徐明华, 孙鸿平, 顾铁, 曹红福, 付金明. 热变形工艺对SAE8620H齿轮钢带状组织的影响[J]. 金属热处理, 2014, 39(12): 1-6.