汽轮机调速汽阀高温紧固螺栓断裂失效分析

doi:10.13251/j.issn.0254-6051.2023.03.049

金属热处理 ›› 2023, Vol. 48 ›› Issue (3): 292-295.DOI: 10.13251/j.issn.0254-6051.2023.03.049

汽轮机调速汽阀高温紧固螺栓断裂失效分析

孙云飞, 史贤达, 张志浩, 陈浩, 吕磊, 云峰

内蒙古电力(集团)有限责任公司内蒙古电力科学研究院分公司, 内蒙古呼和浩特 010020

收稿日期:2022-10-30 修回日期:2023-02-10 出版日期:2023-03-25 发布日期:2023-04-25
作者简介:孙云飞(1992—),男,工程师,硕士,主要研究方向为电力设备金属零部件失效分析,E-mail:sunyunfei.impc@foxmail.com。
基金资助:
内蒙古电力科学研究院2021年自筹科技项目(2021-ZC-08)

Fracture failure analysis of high-temperature fastening bolt for turbine control valve

Sun Yunfei, Shi Xianda, Zhang Zhihao, Chen Hao, Lü Lei, Yun feng

Inner Mongolia Power (Group) Co., Ltd., Inner Mongolia Power Research Institute Branch, Hohhot Inner Mongolia 010020, China

Received:2022-10-30 Revised:2023-02-10 Online:2023-03-25 Published:2023-04-25

摘要/Abstract

摘要： 某火电厂在机组检修期间发现汽轮机中压调速汽阀高温紧固螺栓断裂失效。为了确定失效原因,避免类似事件再次发生,利用直读光谱仪、光学显微镜、扫描电镜、摆锤式冲击试验机对断裂螺栓的宏观形貌、断口微观形貌、化学成分、显微组织、力学性能等进行了测试分析。结果表明,此次高温紧固螺栓断裂的主要原因为20Cr1Mo1VTiB钢螺栓在制造阶段的锻造温度过高或淬火温度过高造成组织晶粒粗大,引起材料冲击性能降低,在中压调速汽阀频繁动作产生的冲击载荷作用下沿粗晶部位开裂,并以脆性解理断裂方式扩展,直至螺栓整体断裂。

关键词: 高温紧固螺栓, 20Cr1Mo1VTiB钢, 断裂, 粗晶, 热加工

Abstract: High temperature fastening bolt of the steam turbine IP governing valve was broken and failed during the unit maintenance in A thermal power plant. In order to determine the cause of failure and avoid the recurrence of similar events, macro morphology, fracture micro morphology, chemical composition, microstructure and mechanical properties of the fractured bolt were tested and analyzed by direct reading spectrometer, optical microscope, scanning electron microscope and pendulum impact tester. The results show that the main reason for the fracture of high temperature fastening bolt made of 20Cr1Mo1VTiB steel is that the forging temperature of the bolt in the manufacturing stage is too high or the quenching temperature is too high, which results in the coarse grain structure and the impact property of the material is reduced. Under the impact load generated by the frequent action of the turbine control valve, the bolt cracks along the coarse grain region and extends in the form of brittle cleavage fracture until the bolt is completely broken.

Key words: high-temperature fastening bolt, 20Cr1Mo1VTiB steel, fracture, coarse grain, hot working

中图分类号:

TF146

孙云飞, 史贤达, 张志浩, 陈浩, 吕磊, 云峰. 汽轮机调速汽阀高温紧固螺栓断裂失效分析[J]. 金属热处理, 2023, 48(3): 292-295.

Sun Yunfei, Shi Xianda, Zhang Zhihao, Chen Hao, Lü Lei, Yun feng. Fracture failure analysis of high-temperature fastening bolt for turbine control valve[J]. Heat Treatment of Metals, 2023, 48(3): 292-295.

参考文献

[1]郑建军, 樊子铭, 刘孝, 等. 汽轮机组阀盖紧固螺栓断裂失效分析[J]. 金属热处理, 2021, 46(10): 262-266.
Zheng Jianjun, Fan Ziming, Liu Xiao, et al. Failure analysis of fastening bolts of one steam turbine valve cover[J]. Heat Treatment of Metals, 2021, 46(10): 262-266.
[2]谢增孝, 黄一君, 张宇飞, 等. 高调阀自密封拉紧螺栓断裂分析[J]. 金属热处理, 2021, 46(7): 242-248.
Xie Zengxiao, Huang Yijun, Zhang Yufei, et al. Fracture analysis of self sealing tension bolt of high pressure regulating valve[J]. Heat Treament of Metals, 2021, 46(7): 242-248.
[3]吴跃, 刘俊建, 陈顺, 等. 超临界机组R26高温合金螺栓典型组织与性能[J]. 金属热处理, 2019, 44(6): 22-28.
Wu Yue, Liu Junjian, Chen Shun, et al. Typical microstructure and properties of R26 superalloy bolt for supercritical unit[J]. Heat Treatment of Metals, 2019, 44(6): 22-28.
[4]李梦阳. 某600 MW亚临界机组2Cr13钢螺栓的断裂失效分析[J]. 金属热处理, 2021, 46(11): 250-253.
Li Mengyang. Fractrue failure analysis of 2Cr13 steel bolt in a 600 MW subcritical unit[J]. Heat Treatment of Metals, 2021, 46(11): 250-253.
[5]奚杰峰, 马延会, 陈锐. 国产20Cr1Mo1VTiB主汽门螺栓的失效机理研究[J]. 热加工工艺, 2015, 44(2): 234-236.
Xi Jiefeng, Ma Yanhui, Chen Rui. Analysis on bolt fracture of high-pressure main stop valve of turbine[J]. Hot Working Technology, 2015, 44(2): 234-236.
[6]张健, 王若民, 陈国宏, 等. 20Cr1Mo1VTiB钢制高温紧固螺栓断裂失效分析[J]. 理化检验(物理分册), 2019, 55(11): 804-807.
Zhang Jian, Wang Ruoming, Chen Guohong, et al. Failure analysis on fracture of high temperature fastening bolts of 20Cr1MolVTiB steel[J]. Physical Testing and Chemical Analysis (Part A:Physical Testing), 2019, 55(11): 804-807.
[7]赵孟雅, 彭涛, 赵吉庆, 等. 长期时效对20Cr1Mo1VTiB螺栓钢的组织和力学性能的影响[J]. 材料研究学报, 2020, 34(5): 321-327.
Zhao Mengya, Peng Tao, Zhao Jiqing, et al. Effect of long-term aging on microstructure and mechanical properties of 20Cr1MolVTiB bolt steel[J]. Chinese Journal of Materials Research, 2020, 34(5): 321-327.
[8]张方明, 彭以超, 楼玉民, 等. 20Cr1Mo1VNbTiB材质螺栓性能可靠性分析及建议[J]. 能源工程, 2021(4): 48-53.
Zhang Fangming, Peng Yichao, Lou Yumin, et al. Analysis of performance and reliability of 20CrlMolVNbTiB bolts[J]. Energy Engineering, 2021(4): 48-53.
[9]李戈, 郭延军, 王鲁, 等. 某电厂汽轮机20Cr1Mo1VNbTiB钢汽门螺栓开裂失效分析[J]. 金属热处理, 2021, 46(5): 248-252.
Li Ge, Guo Yanjun, Wang Lu, et al. Cracking failure analysis of 20CrlMolVNbTiB steel steam turbine valve bolts in a power plant[J]. Heat Treatment of Metals, 2021, 46(5): 248-252.
[10]吕磊, 涂安琪, 张涛. 汽轮机主汽阀高温紧固螺栓断裂原因分析[J]. 内蒙古电力技术, 2020, 38(3): 80-82.
Lü Lei, Tu Anqi, Zhang Tao. Analysis of fracture cause of high temperature fastening bolt for main valve of steam turbine[J]. Inner Mongolia Electric Power, 2020, 38(3): 80-82.
[11]董瑞, 陈林, 岑耀东, 等. 不同热处理条件下贝氏体钢的微观组织和疲劳裂纹扩展[J]. 金属热处理, 2022, 47(2): 153-158.
Dong Rui, Chen Lin, Cen Yaodong, et al. Microstructure and fatigue crack growth of a bainitic steel under different heat treatments[J]. Heat Treatment of Metals, 2022, 47(2): 153-158.
[12]欧蓉. 浅析高温螺栓钢20Cr1Mo1VNbTiB粗晶现象及其控制[J]. 特钢技术, 2005, 10(2): 17-19.
Ou Rong. Analysis and controlling about heavy grain of high-temp bolting steel 20Cr1Mo1VNbTiB[J]. Special Steel Technology, 2005, 10(2): 17-19.
[13]王云龙, 余伟, 张昳, 等. 奥氏体化温度对贝氏体钢等温转变及力学性能的影响[J]. 金属热处理, 2022, 47(4): 80-85.
Wang Yunlong, Yu Wei, Zhang Yi, et al. Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel[J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
[14]王飞, 赵成志, 李建新, 等. 正火处理对高强钢临界变形粗晶组织的影响[J]. 金属热处理, 2019, 44(8): 192-195.
Wang Fei, Zhao Chengzhi, Li Jianxin, et al. Effect of normalizing treatment on critical deformed coarse grains of high-strength steel[J]. Heat Treatment of Metals, 2019, 44(8): 192-195.
[15]龚雪婷, 武志广, 李鑫, 等. 热处理工艺对20Cr1Mo1VTiB螺栓钢组织及性能的影响[J]. 钢铁, 2018, 53(12): 105-111.
Gong Xueting, Wu Zhiguang, Li Xin, et al. Effect of heat treatment process on microstructure and mechanical properties of 20Cr1MolVTiB steel[J]. Iron and Steel, 2018, 53(12): 105-111.
[16]陈浩, 乔欣, 郑建军, 等. 25Cr2MoV高温紧固螺栓断裂原因分析[J]. 内蒙古电力技术, 2018, 36(4): 50-52, 56.
Chen Hao, Qiao Xin, Zheng Jianjun, et al. Fracture analysis of high temperature bolt used for 25Cr2MoV steel[J]. Inner Mongolia Electric Power, 2018, 36(4): 50-52, 56.

汽轮机调速汽阀高温紧固螺栓断裂失效分析

Fracture failure analysis of high-temperature fastening bolt for turbine control valve

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李雷, 王军, 曹召勋, 韩俊刚, 邵志文, 徐永东. 均匀化处理对挤压态Mg-Al-Zn-0.1Y合金热变形行为及织构的影响[J]. 金属热处理, 2023, 48(3): 77-83.
[2]	李惠曲, 王亮, 臧金鑫, 郝敏, 陈军洲. 7050高强铝合金铆钉丝材T73双级时效工艺[J]. 金属热处理, 2023, 48(3): 112-117.
[3]	张敬瑞, 赵艳君, 苏科. 含铝节镍型奥氏体耐热钢(AFA钢)的热变形行为与热加工图[J]. 金属热处理, 2023, 48(3): 166-173.
[4]	曹鑫, 李权, 杨银辉. V对含氮马氏体不锈钢组织和力学性能的影响[J]. 金属热处理, 2023, 48(3): 236-241.
[5]	梁月慧, 祁文军. 孔洞式缺陷对γ-TiAl合金断裂行为的影响[J]. 金属热处理, 2023, 48(2): 295-302.
[6]	陈继林, 张育明, 孟一, 闫聪, 林鹏. 发动机缸盖螺栓疲劳断裂失效分析[J]. 金属热处理, 2023, 48(2): 308-313.
[7]	胡剑凌, 朱华明, 严红革, 陈吉华, 夏伟军, 张蒙. Mg-6Gd-1.2Y-0.53Zr合金的热变形行为及热加工图[J]. 金属热处理, 2023, 48(1): 115-121.
[8]	刘华东, 邵百明, 黎军顽. 汽车稳定杆断裂分析[J]. 金属热处理, 2023, 48(1): 253-256.
[9]	郑洪, 林文钦, 杨元熙, 徐心洁, 邓枫, 吴佳欣, 蒋洪俊. 30CrMnSiA合金前端吊耳断裂原因分析[J]. 金属热处理, 2022, 47(8): 292-295.
[10]	陈蕾蕾, 瞿宗宏, 王泽钰, 赖运金, 梁书锦. 热等静压态FGH96合金的热变形行为及热加工图[J]. 金属热处理, 2022, 47(7): 63-70.
[11]	焦丽, 商海昆, 何剑丰, 王国亮, 冯涛, 王嘉, 扈钰涛. 柴油发动机活塞连杆机构失效原因分析[J]. 金属热处理, 2022, 47(7): 277-282.
[12]	魏彩丽, 张沈洁, 杜冈峰. QBe2铍青铜插接件断裂原因分析[J]. 金属热处理, 2022, 47(7): 286-288.
[13]	袁智, 张海莲, 张会杰, 马庆爽, 贺翔, 毕长波, 李会军, 高秋志. 新型含Al奥氏体耐热钢高温蠕变性能的研究现状[J]. 金属热处理, 2022, 47(5): 14-24.
[14]	周晓锋, 付文, 利成宁, 程方杰. Ti80钛合金两相区高温变形本构模型及热加工图[J]. 金属热处理, 2022, 47(5): 25-30.
[15]	李荣斌, 李博, 张志玺, 彭望君, 郭彦兵. X12CrMoWVNbN钢的热变形行为及热加工图[J]. 金属热处理, 2022, 47(5): 31-39.