蒸汽发生器用SA508-3钢锻后热处理的数值模拟及其试验验证

doi:10.13251/j.issn.0254-6051.2024.05.009

金属热处理 ›› 2024, Vol. 49 ›› Issue (5): 55-61.DOI: 10.13251/j.issn.0254-6051.2024.05.009

蒸汽发生器用SA508-3钢锻后热处理的数值模拟及其试验验证

冯兴旺¹, 张可², 刘久江², 石如星³, 苏文博³, 刘帅¹, 李志鹏¹, 杨滨¹

1.北京科技大学钢铁共性技术协同创新中心, 北京 100083;
2.中核山东核能有限公司, 山东烟台 265100;
3.洛阳中重铸锻有限责任公司, 河南洛阳 471039

收稿日期:2023-11-03 修回日期:2024-04-02 出版日期:2024-05-25 发布日期:2024-06-28
通讯作者: 杨滨,教授,博士, E-mail:byang@ustb.edu.cn
作者简介:冯兴旺(1999—),男,硕士研究生,主要研究方向为核电用钢的组织性能调控,E-mail:fengxingwang2022@163.com。
基金资助:
国家高技术研究发展计划重大项目(2012AA03A507);国家高技术研究发展计划重点项目(2008AA031702);中央高校基本科研业务费专项(FRF-BD-23-01);中核山东核能有限公司项目

Numerical simulation and experimental verification of heat treatment after forging of SA508-3 steel for steam generator

Feng Xingwang¹, Zhang Ke², Liu Jiujiang², Shi Ruxing³, Su Wenbo³, Liu Shuai¹, Li Zhipeng¹, Yang Bin¹

1. Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China;
2. CNNC Shandong Nuclear Energy Co., Ltd., Yantai Shandong 265100, China;
3. Luoyang CITIC Heavy Industries Casting and Forging, Luoyang Henan 471039, China

Received:2023-11-03 Revised:2024-04-02 Online:2024-05-25 Published:2024-06-28

摘要/Abstract

摘要： 以蒸汽发生器用SA508-3钢大锻件为研究对象,通过JMatpro软件计算获得了热物性参数,利用Deform-3D软件模拟研究了热处理后锻件的组织和硬度,并采用小试样物理模拟方法进行了试验验证。结果表明,试验测试的组织和硬度与模拟结果吻合良好。可见,数值模拟技术是辅助确定大锻件热处理工艺合理性的有效工具,对缩短生产周期,降低成本,具有显著的实用价值。

关键词: SA508-3钢, 蒸汽发生器, 锻后热处理, 数值模拟

Abstract: Taking SA508-3 steel forging for steam generator as research object, the thermophysical parameters for the steel were calculated by JMatpro software. After heat treatment, the microstructure and hardness of the forging were simulated by Deform-3D software. And the experimental verification was carried out by small specimen physical simulation method. The results show that the microstructure and hardness of both the experimental test and numerical simulation are in good agreement. It can be seen that numerical simulation technology is an effective tool to determine the rationality of heat treatment process for large forgings, which has significant value in shortening production cycle and reducing cost.

Key words: SA508-3 steel, steam generator, heat treatment after forging, numerical simulation

中图分类号:

TG161

冯兴旺, 张可, 刘久江, 石如星, 苏文博, 刘帅, 李志鹏, 杨滨. 蒸汽发生器用SA508-3钢锻后热处理的数值模拟及其试验验证[J]. 金属热处理, 2024, 49(5): 55-61.

Feng Xingwang, Zhang Ke, Liu Jiujiang, Shi Ruxing, Su Wenbo, Liu Shuai, Li Zhipeng, Yang Bin. Numerical simulation and experimental verification of heat treatment after forging of SA508-3 steel for steam generator[J]. Heat Treatment of Metals, 2024, 49(5): 55-61.

参考文献

[1]Qiu Y, Xin R, Luo J, et al. The effects of homogenizing and quenching and tempering treatments on crack healing[J]. Metals, 2020, 10(4): 427.
[2]Wang Q, Zhao Y, Li L, et al. The dynamic compressive behavior and constitutive model of SA508-3 steel at high strain rates under elevated temperatures[J]. Journal Material Science, 2023, 58: 8489-8502.
[3]Jiang Z, Wang P, Li Y, et al. Transformation mechanism for the blocky microstructure of nuclear power used SA508-3 steel[J]. Metallurgical and Materials Transactions A, 2023, 54: 1174-1185.
[4]张亚伟. 热轧高强钢回火温度场数值模拟研究[D]. 上海: 上海交通大学, 2016.
Zhang Yawei. Research ontemperature field of hot-rolled high strength steel during tempering treatment with numerical simulation method[D]. Shanghai: Shanghai Jiao Tong University, 2016.
[5]Li Z, Yan X, Shi R, et al. Numerical simulation research of the quenching and tempering temperature filed in thick nuclear power forgings of 18MnMoNi steel[J]. IOP Conference Series: Materials Science and Engineering, 2018, 452(2): 022066.
[6]Zhu H, Li S, Wang C. Numerical simulation of temperature field of gears in quenching process[J]. Applied Mechanics and Materials, 2014, 457-458: 566-570.
[7]Feng X W, Wang Y X, Han J X, et al. Numerical simulation and experimental verification of the quenching process for Ti microalloying H13 steel used to shield machine cutter rings[J]. Metals, 2024, 14(3): 313.
[8]Li J, Tang L, Li S, et al. FEM simulation and experimental verification of temperature field and phase transformation in deep cryogenic treatment[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(10): 2421-2430.
[9]Tian Y, Tan Z, Li H, et al. A new finite element model for Mn-Si-Cr bainitic/martensitic product quenching process: Simulation and experimental validation[J]. Journal of Materials Processing Technology, 2021, 294: 117137.
[10]刘婷, 王巍, 谢景洋, 等. 30NiCrMoV12金属轴承锻件热处理过程数值模拟研究[J]. 世界有色金属, 2020(4): 1-3.
Liu Ting, Wang Wei, Xie Jingyang, et al. Numerical simulation study on heat treatment process of 30NiCrMoV12 metal bearing forgings[J]. World Nonferrous Metals, 2020(4): 1-3.
[11]Wang R, Jiang H, Shao W, et al. Quenching induced residue stress in M50 steel ring: A FEM simulation[J]. Journal Material Research Technology, 2023, 24: 5298-5308.
[12]刘馨宇, 谢本昌, 王业双, 等. 基于Jmatpro和Deform的钛合金试件热处理模拟[J]. 金属热处理, 2023, 48(4): 253-256.
Liu Xinyu, Xie Benchang, Wang Yeshuang, et al. Heat treatment simulation of titanium alloy part based on Jmatpro and Deform[J]. Heat Treatment of Metals, 2023, 48(4): 253-256.
[13]王中琳, 李权, 龚志华, 等. 丝杠用1Cr15Ni4Mo2CuN不锈钢热处理温度场的有限元数值模拟[J]. 金属热处理, 2023, 48(4): 245-252.
Wang Zhonglin, Li Quan, Gong Zhihua, et al. Finite element numerical simulation of heat treatment temperature field of 1Cr15Ni4Mo2CuN stainless steel for screw[J]. Heat Treatment of Metals, 2023, 48(4): 245-252.
[14]Tong D, Gu J, Yang F. Numerical simulation on induction heat treatment process of a shaft part: Involving induction hardening and tempering[J]. Journal of Materials Processing Technology, 2018, 262: 277-289.
[15]董嘉兵, 王慧军, 陈林, 等. 新型H380级别高强度钢轨热处理工艺的数值模拟[J]. 特殊钢, 2020, 41(4): 1-5.
Dong Jiabing, Wang Huijun, Chen Lin, et al. Numerical simulation on heat treatment process of H380 new high strength steel rail[J]. Special Steel, 2020, 41(4): 1-5.
[16]Takeuchi H, Yogo Y. Jet quenching simulation with consideration for distribution of heat transfer coefficient and latent heat for martensitic transformation under rapid cooling[J]. ISIJ International, 2021, 61(3): 871-880.
[17]Jiang Y, Liu F, Wang J, et al. Solid-state phase transformation kinetics in the near-equilibrium regime[J]. Journal of Materials Science, 2015, 50(2): 662-677.
[18]Cahn J W. Transformation kinetics during continuous cooling[J]. Acta Metallurgica, 1956, 4(6): 572-575.
[19]Liu F, Sommer F, Bos C, et al. Analysis of solid state phase transformation kinetics: Models and recipes[J]. International Materials Reviews, 2007, 52(4): 193-212.
[20]苏兴武, 顾敏. 淬火冷却过程数值模拟的研究现状及展望[J]. 金属热处理, 2008, 33(6): 1-7.
Su Xingwu, Gu Min. Research status and prospects of numerical simulation of quenching process[J]. Heat Treatment of Metals, 2008, 33(6): 1-7.
[21]Hömberg D, Liu Q, Montalvo-Urquizo J, et al. Simulation of multi-frequency-induction-hardening including phase transitions and mechanical effects[J]. Finite Elements in Analysis and Design, 2016, 121: 86-100.
[22]Zhang X, Tang J, Zhang X. An optimized hardness model for carburizing-quenching of low carbon alloy steel[J]. Journal of Central South University, 2017, 24(1): 9-16.
[23]李永堂, 杨卿, 齐会萍, 等. 基于铸辗复合成形的铸态42CrMo钢热物理性能参数的研究[J]. 机械工程学报, 2014(16): 77-82.
Li Yongtang, Yang Qing, Qi Huiping, et al. Study on the thermal-physical characteristic parameters of casting 42CrMo based on cast-rolling forming technology[J]. Journal of Mechanical Engineering, 2014(16): 77-82.

蒸汽发生器用SA508-3钢锻后热处理的数值模拟及其试验验证

Numerical simulation and experimental verification of heat treatment after forging of SA508-3 steel for steam generator

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张帅坤, 张超勇, 吴剑钊, 唐莉梅. 40Cr钢滚刀织构表面激光淬火的数值模拟[J]. 金属热处理, 2024, 49(5): 47-54.
[2]	石红昌, 黄安明, 刘兴, 强斌. 焊后热处理对150 mm厚容器钢板残余应力影响的数值模拟[J]. 金属热处理, 2024, 49(5): 62-67.
[3]	刘刚, 刘艳梅, 张增光, 康冲, 王新宇, 廖启宇. 管形构件热处理形状系数数值模拟[J]. 金属热处理, 2024, 49(3): 279-285.
[4]	陈浩, 涂宇杰, 蒋志鹏, 吴晓春. H11钢大型压铸模块真空气淬的数值模拟与试验[J]. 金属热处理, 2024, 49(2): 227-235.
[5]	朱禹, 陈菊芳, 陈蒙恩, 李小平, 彭天豪. 不同层间冷却时间下H13钢电弧增材制造热力场数值模拟及强化效果[J]. 金属热处理, 2024, 49(2): 236-243.
[6]	李云峰, 王嘉圣, 石岩, 姜广君, 唐术锋, 何晓东. 载气流量对激光熔覆添加Y₂O₃的镍基涂层组织和耐腐蚀性的影响[J]. 金属热处理, 2024, 49(2): 281-290.
[7]	唐鹏, 陆声城, 肖沛欣, 黎家栋, 何万尧. 淬火介质对7075铝合金残余应力影响的数值模拟及试验验证[J]. 金属热处理, 2024, 49(1): 284-290.
[8]	马正和, 阿达依·谢尔亚孜旦, 刘俊杰, 古丽·尼尕尔. 45钢的激光淬火温度场与相变硬化区[J]. 金属热处理, 2023, 48(9): 258-264.
[9]	吕虎跃, 陈旭阳, 丛培武, 陆文林, 杜春辉. 汽车齿轮高压气淬试验及气淬室的结构优化[J]. 金属热处理, 2023, 48(6): 264-269.
[10]	魏文婷, 赵天翼, 柯锦哲, 刘青龙. 汽车轮毂轴承内圈感应回火温度均匀性的数值模拟[J]. 金属热处理, 2023, 48(5): 129-137.
[11]	陈建文, 袁伍丰, 邹伟, 刘克, 欧阳雪枚, 王鑫铭. 20Cr2Ni4A钢齿圈压力淬火过程的温度场模拟[J]. 金属热处理, 2023, 48(5): 145-150.
[12]	蒋志鹏, 陈浩, 吴晓春. 压铸模具钢大模块真空高压气淬冷却过程的数值模拟[J]. 金属热处理, 2023, 48(4): 211-220.
[13]	张斌, 尹少武, 张文聪, 卢世杰, 童莉葛, 王立. 富氧燃烧条件下钢坯加热特性的数值模拟[J]. 金属热处理, 2023, 48(4): 221-228.
[14]	陈素明, 杨平, 任树锋, 罗贤, 王文博. 30CrMnSiNi2A钢轴类零件感应热处理的数值模拟[J]. 金属热处理, 2023, 48(4): 235-244.
[15]	王中琳, 李权, 龚志华, 包汉生, 雍兮. 丝杠用1Cr15Ni4Mo2CuN不锈钢热处理温度场的有限元数值模拟[J]. 金属热处理, 2023, 48(4): 245-252.