模拟焊后热处理对厚规格16MnDR钢板组织性能的影响

doi:10.13251/j.issn.0254-6051.2024.08.024

金属热处理 ›› 2024, Vol. 49 ›› Issue (8): 147-151.DOI: 10.13251/j.issn.0254-6051.2024.08.024

模拟焊后热处理对厚规格16MnDR钢板组织性能的影响

曲之国^1,2, 张万新^1,2, 白学飞^1,2, 王东明^1,2, 张友建^1,2

1.日钢营口中板有限公司, 辽宁营口 115005;
2.辽宁省中厚板专业技术创新中心, 辽宁营口 115005

收稿日期:2024-02-04 修回日期:2024-06-12 出版日期:2024-08-25 发布日期:2024-09-27
作者简介:曲之国(1983—),男,高级工程师,硕士,主要研究方向为钢铁新材料开发,E-mail:qzg500@163.com

Effect of simulated post weld heat treatment on microstructure and properties of thick gauge 16MnDR steel plate

Qu Zhiguo^1,2, Zhang Wanxin^1,2, Bai Xuefei^1,2, Wang Dongming^1,2, Zhang Youjian^1,2

1. Rizhao Steel Yingkou Medium Plate Co., Ltd., Yingkou Liaoning 115005, China;
2. Liaoning Province Medium and Heavy Plate Professional Technology Innovation Center, Yingkou Liaoning 115005, China

Received:2024-02-04 Revised:2024-06-12 Online:2024-08-25 Published:2024-09-27

摘要/Abstract

摘要： 对55 mm厚16MnDR正火态钢板进行590 ℃保温不同时间(135、405 min)的模拟焊后热处理,研究模拟焊后热处理对厚规格16MnDR钢板显微组织和力学性能的影响。结果表明,随模拟焊后热处理保温时间的增加,正火态钢板强度先增加后降低,但整体变化幅度不超过10 MPa;钢板厚1/4、1/2处的冲击吸收能量变化呈现不同的趋势,厚1/4处为单调降低,厚1/2处则先增加后降低。经模拟焊后热处理,16MnDR钢板的显微组织较正火态未发生显著变化,仍为铁素体+珠光体,但片层状渗碳体逐步向球状或点状渗碳体转变;此外,钢中析出碳化物数量随保温时间增加而增加,但长大趋势不明显,沿晶界的渗碳体析出是导致钢板冲击性能降低的主要原因。

关键词: 厚规格16MnDR钢板, 焊后热处理, 组织, 力学性能

Abstract: Simulated post weld heat treatment (PWHT) at 590 ℃ for different holding time (135, 405 min) was conducted on a 55 mm thick 16MnDR steel plate as-normalized and the effect of simulated PWHT on the microstructure and mechanical properties of the plate was studied. The results show that as the holding time of simulated PWHT increases, the strength of the normalized steel plate increases first and then decreases, but the overall change amplitude does not exceed 10 MPa. The impact absorbed energy at 1/4 and 1/2 thickness of the steel plate shows different trends, which decreases monotonically at 1/4 thickness, while increases first and then decreases at 1/2 thickness. After the simulated PWHTs, there are no significant change in the microstructure of the steel plate compared to the normalized state, which remains ferrite+pearlite, but the lamellar cementite gradually transforms into spherical or punctate cementite. The number of precipitated carbides in the steel increases with the increase of holding time, but the growth trend is not obvious, and the precipitation of cementite along grain boundaries is the main reason for the reduction of impact absorbed energy.

Key words: thick gauge 16MnDR steel plate, post weld heat treatment (PWHT), microstructure, mechanical properties

中图分类号:

TG115.5

曲之国, 张万新, 白学飞, 王东明, 张友建. 模拟焊后热处理对厚规格16MnDR钢板组织性能的影响[J]. 金属热处理, 2024, 49(8): 147-151.

Qu Zhiguo, Zhang Wanxin, Bai Xuefei, Wang Dongming, Zhang Youjian. Effect of simulated post weld heat treatment on microstructure and properties of thick gauge 16MnDR steel plate[J]. Heat Treatment of Metals, 2024, 49(8): 147-151.

参考文献

[1]高照海, 唐郑磊, 许少普, 等. 80~100 mm厚正火低温压力容器钢16MnDR的开发[J]. 钢铁研究, 2015, 43(2): 19-23.
Gao Zhaohai, Tang Zhenglei, Xu Shaopu, et al. Development of 80-100 mm thick low-temperature pressure vessel steel 16MnDR for normalized[J]. Research on Iron and Steel, 2015, 43(2): 19-23.
[2]]李静, 赵倩. 低温钢16MnDR焊接工艺研究[J]. 热加工工艺, 2015, 44(3): 240-241, 244.
Li Jing, Zhao Qian. Research onlow-temperature steel 16MnDR welding technology[J]. Hot Working Technology, 2015, 44(3): 240-241, 244.
[3]]陈泰炜. 压力容器焊后热处理技术[M]. 北京: 中国石化出版社, 2002.
[4]张跃飞, 张学峰, 白学军, 等. 模拟焊后热处理循环次数对A516Gr70钢板组织性能的影响[J]. 轧钢, 2017, 34(5): 32-34, 37.
Zhang Yuefei, Zhang Xuefeng, Bai Xuejun, et al. Effect of simulated PWHT cycle times on microstructure and properties of A516Gr70 plate[J]. Steel Rolling, 2017, 34(5): 32-34, 37.
[5]徐琛, 陈广兴, 张勇伟, 等. 1.25Cr-0.5Mo钢热处理后的组织与力学性能[J]. 金属热处理, 2021, 46(6): 200-204.
Xu Chen, Chen Guangxing, Zhang Yongwei, et al. Microstructure and mechanical properties of 1.25Cr-0.5Mo steel after heat treatment[J]. Heat Treatment of Metals, 2021, 46(6): 200-204.
[6]李媛媛, 雷钧皓. 模拟焊后热处理制度对09MnNiDR钢板组织及性能的影响[J]. 宽厚板, 2022, 28(4): 41-45.
Li Yuanyuan, Lei Junhao. Effects of simulated PWHT system on microstructure and mechanical properties of 09MnNiDR steel plate[J]. Wide and Heavy Plate, 2022, 28(4): 41-45.
[7]欧阳鑫, 胡昕明, 王储, 等. 模拟焊后热处理次数对Q370R钢板组织和性能的影响[J]. 上海金属, 2021, 43(4): 51-55.
Ouyang Xin, Hu Xinming, Wang Chu, et al. Effect of simulated postwelding heat treatment times on microstructure and properties of Q370R steel plate[J]. Shanghai Metals, 2021, 43(4): 51-55.
[8]苗俊安, 许小波, 于本水, 等. 16MnDR钢制低温压力容器的焊接工艺[J]. 焊接技术, 2021, 50(5): 157-159.
[9]赵天亮, 苏召, 苏建立. 16MnDR钢低温压力容器焊缝返修工艺[J]. 焊接技术, 2017, 46(5): 148-150.
[10]崔钟圻, 刘北兴. 金属学与热处理原理[M]. 哈尔滨: 哈尔滨工业大学出版社, 2007.
[11]]Offerman S E, Dijk N H V, Rekveldt M T, et al. Ferrite/pearlite band formation in hot rolled medium carbon steel[J]. Materials Science and Technology, 2002, 18(3): 297-303.
[12]GroBterlinden R, Kawalla R, Lotter U, et al. Formation of pearlitic banded structures in ferritic-pearlitic steels[J]. Steel Research, 2016, 63(8): 331-336.
[13]朱永宽, 董富军, 廖桑桑. Nb、V、Ti微合金对压力容器用中厚板模拟焊后性能的影响[J]. 江西冶金, 2020, 40(2): 50-54.
Zhu Yongkuan, Dong Fujun, Liao Sangsang. A study on the effect of Nb, V, Ti micro-alloys on simulated post weld properties of medium of pressure vessels with plates[J]. Jiangxi Metallurgy, 2020, 40(2): 50-54.

[1]	高玉魁, 方文奕. 碳含量与热处理对高铌钛铝合金微观组织及力学性能的影响[J]. 金属热处理, 2024, 49(8): 9-14.
[2]	张宏亮, 周春波, 侯燕, 蒋志强. C-Si-Mn系配分钢的研究进展[J]. 金属热处理, 2024, 49(8): 22-30.
[3]	刘运娜, 孙笠灿, 戴观文, 刘献达, 宋仁伯, 张朝磊. 冷却速率和Nb微合金化对25MnV非调质钢组织和硬度的影响[J]. 金属热处理, 2024, 49(8): 31-35.
[4]	曾祥军, 史志铭, 赵鸽, 廉浩, 刘佳成. 轻-重稀土混合添加对Al-Si-Mg合金显微组织和力学性能的影响[J]. 金属热处理, 2024, 49(8): 36-41.
[5]	曹悦, 高雪云, 王海燕, 邢磊, 林鸿亮. 稀土La对含Cu马氏体不锈钢显微组织与力学性能的影响[J]. 金属热处理, 2024, 49(8): 42-47.
[6]	白瑞, 杜云飞, 贺秀丽, 梁红玉. Al含量对高锰高铝轻质钢组织和力学性能的影响[J]. 金属热处理, 2024, 49(8): 48-52.
[7]	徐超, 曹欣旺, 王晨阳, 王玉婷, 张倩, 杨其全, 胡杰. 热处理工艺对高速列车用51CrV4钢轴箱弹簧力学性能及服役性能的影响[J]. 金属热处理, 2024, 49(8): 53-59.
[8]	华文娟, 张建勋. 时效处理对电弧熔丝增材制造2319铝合金性能及断裂行为的影响[J]. 金属热处理, 2024, 49(8): 60-66.
[9]	郭呈宇, 张哲, 张弛, 代春朵, 侯华兴, 李江文. Q&P工艺对1000 MPa级高强钢组织与性能的影响[J]. 金属热处理, 2024, 49(8): 67-73.
[10]	王堤鹤, 庞启航, 赵星宇, 李维娟, 赵立冬, 史津铭. IQ&P工艺处理高强钢的组织性能及低温C配分[J]. 金属热处理, 2024, 49(8): 74-81.
[11]	刘静, 赵科, 王丽阁. 退火对Co_xFe₃₅Mn₂₅Cr₁₅Ni₁₀Ti₅高熵合金微观组织及硬度的影响[J]. 金属热处理, 2024, 49(8): 94-101.
[12]	王春兴, 李明. 退火处理对CoCrFeNiMn高熵合金组织和性能的影响[J]. 金属热处理, 2024, 49(8): 102-107.
[13]	任云飞, 潘新元, 万天剑, 李景辉, 张明亚. T6热处理对高压压铸ADC12铝合金微观结构和性能的影响[J]. 金属热处理, 2024, 49(8): 108-112.
[14]	迟蕊, 徐志远, 孟双, 李延成, 徐扬帆, 李涛. 中间退火温度对6016铝合金组织及性能的影响[J]. 金属热处理, 2024, 49(8): 113-118.
[15]	徐锋, 孙强, 孟吉炜. 固溶温度对超低碳15-5PH沉淀硬化不锈钢组织和性能的影响[J]. 金属热处理, 2024, 49(8): 124-129.

模拟焊后热处理对厚规格16MnDR钢板组织性能的影响

Effect of simulated post weld heat treatment on microstructure and properties of thick gauge 16MnDR steel plate

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价