稀土Ce对32MnMoNiCu铸钢微观组织与力学性能的影响

doi:10.13251/j.issn.0254-6051.2025.01.007

金属热处理 ›› 2025, Vol. 50 ›› Issue (1): 47-52.DOI: 10.13251/j.issn.0254-6051.2025.01.007

稀土Ce对32MnMoNiCu铸钢微观组织与力学性能的影响

李建国^1,2, 贾冬生^1,2, 赵银虎^1,2, 刘玉宝³, 王旭¹, 赵磊城¹, 兰岳光³

1.内蒙古第一机械集团股份有限公司, 内蒙古包头 014030;
2.特种车辆设计制造集成技术全国重点实验室, 内蒙古包头 014030;
3.包头稀土研究院, 内蒙古包头 014020

收稿日期:2024-07-29 修回日期:2024-11-05 出版日期:2025-01-25 发布日期:2025-03-12
作者简介:李建国(1991—),男,高级工程师,博士,主要研究方向为稀土在钢中的应用,E-mail:Jgli1991@163.com
基金资助:
内蒙古自治区科技计划(2022YFSJ0035)

Effect of rare element Ce on microstructure and mechanical properties of 32MnMoNiCu cast steel

Li Jianguo^1,2, Jia Dongsheng^1,2, Zhao Yinhu^1,2, Liu Yubao³, Wang Xu¹, Zhao Leicheng¹, Lan Yueguang³

1. Inner Mongolia First Machinery Group Co., Ltd., Baotou Inner Mongolia 014030, China;
2. National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology, Baotou Inner Mongolia 014030, China;
3. Baotou Research Institute of Rare Earths, Baotou Inner Mongolia 014020, China

Received:2024-07-29 Revised:2024-11-05 Online:2025-01-25 Published:2025-03-12

摘要/Abstract

摘要： 通过在32MnMoNiCu铸钢中添加稀土铈铁合金,采用扫描电镜观察、拉伸和冲击性能测试等方法,研究稀土Ce对铸钢微观组织和力学性能的影响。结果表明:稀土Ce能够细化铸钢中铁素体组织,将长条状的夹杂物改变成球状,并且减小夹杂物尺寸;稀土Ce在钢中主要以CeAlO₃形式存在,与MnS夹杂物未发生反应;稀土Ce在32MnMoNiCu铸钢中通过析出强化和细晶强化的方式,使抗拉强度和屈服强度分别提高了12.3%和23.4%,但稀土Ce增加了板条状铁素体的比例,导致伸长率和冲击吸收能量分别降低了11.1%和7.4%。

关键词: 32MnMoNiCu铸钢, 稀土元素Ce, 微观组织, 力学性能

Abstract: By adding rare earth cerium iron alloy in the 32MnMoNiCu cast steel, the effect of rare earth Ce on microstructure and mechanical properties of the cast steel was investigated by using scanning electron microscopy observation, tensile and impact testing methods. The results show that rare earth Ce can refine the ferrite phase, transform inclusions shape from long strip into nodular, and decrease the size of inclusions. Rare earth Ce mainly exists in the form of CeAlO₃, and does not react with MnS inclusions. Precipitation strengthening and fine-grained strengthening which are caused by rare earth Ce in the cast steel result in 12.3% and 23.4% increase in tensile strength and yield strength, respectively. However, the increase fraction of lath ferrite by adding rare earth Ce result in 11.1% and 7.4% decrease in elongation and impact absorbed energy, respectively.

Key words: 32MnMoNiCu cast steel, rare element Ce, microstructure, mechanical properties

中图分类号:

TG143.8

李建国, 贾冬生, 赵银虎, 刘玉宝, 王旭, 赵磊城, 兰岳光. 稀土Ce对32MnMoNiCu铸钢微观组织与力学性能的影响[J]. 金属热处理, 2025, 50(1): 47-52.

Li Jianguo, Jia Dongsheng, Zhao Yinhu, Liu Yubao, Wang Xu, Zhao Leicheng, Lan Yueguang. Effect of rare element Ce on microstructure and mechanical properties of 32MnMoNiCu cast steel[J]. Heat Treatment of Metals, 2025, 50(1): 47-52.

参考文献

[1]王子铮. 炼钢-精炼-连铸钢中夹杂物控制[J]. 现代制造技术与装备, 2023, 59(5): 132-134.
Wang Zizheng. Inclusion control in steelmaking refining continuous casting steel[J]. Modern Manufacturing Technology and Equipment, 2023, 59(5): 132-134.
[2]Wang R, Bao Y P, Yan Z J, et al. Influence of metallurgical processing parameters on defects in cold-rolled steel sheet caused by inclusions[J]. International Journal of Minerals Metallurgy and Materials, 2019, 26(4): 440-446.
[3]Gu C, Bao Y P, Gan P, et al. Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime[J]. International Journal of Minerals Metallurgyand Materials, 2018, 25(6): 623-629.
[4]Park J H, Todoroki H. Control of MgO·Al₂O₃ spinel inclusions in stainless steels[J]. ISIJ International, 2010, 50(10): 1333-1346.
[5]Shi C B, Yu W T, Wang H, et al. Simultaneous modification of alumina and of MgO·Al₂O₃ inclusions by calcium treatment during electroslag remelting of stainless tool steel[J]. Metallurgical and Materials Transactions B, 2017, 48(1): 146-161.
[6]Tabatabaei Y, Coley K S, Irons G A, et al. A multilayer model for alumina inclusion transformation by calium in the ladle furnace[J]. Metallurgical and Materials Transactions B, 2018, 49(1): 375-387.
[7]Qi J, Liu C, Liu H, et al. Effect of rare earth oxide on the crystallization behavior of Cao-Al₂O₃-based mold flux for rare earth heat-resistant steel continuous casting[J]. Journal of Non-Crystalline Solids, 2021, 559: 120681.
[8]Wu G S, Fu Z Y, Wang Z. Effects of rare earths on inclusions distribution and modality of 8Cr4MoV cold work roll cast steel[J]. Advanced Materials Research, 2014, 1049-1050: 171-174.
[9]Li H, Mclean A, Rutter J W, et al. Influence of rare earth metals on the nucleation and solidification behavior of iron and 1045 steel[J]. Metallurgical and Materials Transactions B, 1988, 19(3): 383-395.
[10]Geng R M, Li J, Shi C B. Influence of cerium treatment on inclusion modification and as-cast microstructure of high-strength low-alloy steel[J]. Journal of Iron and Steel Research International, 2022, 29(10): 1659-1668.
[11]Behdad G, Masoud K A, Kamran A, et al. Effect of vanadium and rare earth on the structure, phase transformation kinetics and mechanical properties of carbide-free bainitic steel containing silicon[J]. Applied Sciences, 2022, 12: 1668.
[12]Wang S Y, Yu H, Gu H, et al. Effect of trace ferrite on mechanical properties of tempered HSLA steel[J]. Materials Science and Engineering A, 2019, 744: 299-304.
[13]宋育红. 稀土元素对铸钢组织及力学性能的影响[J]. 材料开发与应用, 2014, 29(3): 25-30.
Song Yuhong. Effect of rare earth element on the mechanical properties of cast steel[J]. Development and Application of Materials, 2014, 29(3): 25-30.
[14]Grong O, Kolbeinsen L, Eijk C, et al. Microstructure control of steels through dispersoid metallurgy using novel grain refining alloys[J]. ISIJ International, 2001, 46(6): 824-831.
[15]Ren Q, Zhang L F. Effect of cerium content on inclusions in an ultra-low-carbon aluminum-killed steel[J]. Metallurgical and Materials Transactions B, 2020, 51(2): 589-600.
[16]Wang Y, Li C G, Wang L Z, et al. Modification of alumina inclusions in SWRS82B steel by adding rare earthcerium[J]. Metals, 2020, 10: 1696.
[17]Baker T N. Yield, Flow and Fracture of Polycrystals[M]. London: Applied Science Publication, 1983.

稀土Ce对32MnMoNiCu铸钢微观组织与力学性能的影响

Effect of rare element Ce on microstructure and mechanical properties of 32MnMoNiCu cast steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	黄威明, 周海安, 赵秋红, 许文兵, 于鑫泓, 冯以盛, 张云山, 赵而团. 热处理对51CrMnV弹簧钢力学性能和疲劳性能的影响[J]. 金属热处理, 2025, 50(1): 75-80.
[2]	高鑫, 李明东, 苏杰, 姜庆伟, 夏世洪, 张永强, 宁静. 两相区淬火温度对Cr-Mn-Si低合金钢组织及性能的影响[J]. 金属热处理, 2025, 50(1): 119-125.
[3]	郝莹, 王明伟. 时效处理对石墨烯/Al-Zn-Mg-Cu合金复合材料性能的影响[J]. 金属热处理, 2025, 50(1): 133-139.
[4]	滕宏胤, 王银军, 吴索团. 不同材料夹送辊堆焊层退火处理后的组织及性能对比[J]. 金属热处理, 2025, 50(1): 155-161.
[5]	赵晓宇, 张铮, 杨慧君, 石晓辉, 张敏, 乔珺威. 300M钢等温淬火相变特性及力学性能[J]. 金属热处理, 2025, 50(1): 173-179.
[6]	朱晓龙, 王争辉, 王文焱, 谢敬佩, 刁晓刚, 张飞扬. TiC纳米颗粒强化9Cr耐热钢的微观组织及力学性能[J]. 金属热处理, 2025, 50(1): 187-194.
[7]	刘锦润, 郎宇平, 陈海涛, 冯翰秋, 高智君, 张正富. 氮对冷轧022Cr18Ni8N亚稳奥氏体不锈钢组织及力学性能的影响[J]. 金属热处理, 2025, 50(1): 195-200.
[8]	朱聪, 王芝秀, 王烨, 李海. 时效温度对7055铝合金晶间腐蚀敏感性的影响[J]. 金属热处理, 2025, 50(1): 206-212.
[9]	王成, 刘亚军, 陈志辉, 童善康, 甘晓龙. 冷却温度对热轧双相钢组织和力学性能的影响[J]. 金属热处理, 2025, 50(1): 213-218.
[10]	李杨阳, 于欣冉, 孟涛, 仲加文, 张尧成. 峰时效对喷射沉积挤压7075铝合金压缩性能的影响[J]. 金属热处理, 2025, 50(1): 219-223.
[11]	王欢欢, 卢苏君, 李渊, 徐宁, 朱廷贤, 王旭, 魏宁, 吴大莉, 彭威中. 机器学习预测退火温度和时间对SUS321不锈钢力学性能的影响[J]. 金属热处理, 2025, 50(1): 266-271.
[12]	严昊明, 于朋翰, 于兴福. 高端数控机床导轨用灰铸铁感应淬火裂纹成因分析[J]. 金属热处理, 2025, 50(1): 282-286.
[13]	李兵, 徐飞越, 张鹏, 邢俊峰, 唐正群. 20CrMoH合金钢减速器伞齿轮轴断裂失效分析[J]. 金属热处理, 2025, 50(1): 292-298.
[14]	周浩, 王帅, 曾燕屏, 马志宝, 周德, 郭德瑞, 董树青. 长时在役Inconel 783高温合金螺栓的显微组织和力学性能[J]. 金属热处理, 2024, 49(9): 36-42.
[15]	陈子健, 林业佳, 李传强, 邓仁昡, 董勇, 章争荣. 微合金化调控7075铝合金的微观组织与力学性能[J]. 金属热处理, 2024, 49(9): 58-63.