新能源汽车用含稀土无取向硅钢生产过程中组织、织构演变

doi:10.13251/j.issn.0254-6051.2020.10.020

金属热处理 ›› 2020, Vol. 45 ›› Issue (10): 99-103.DOI: 10.13251/j.issn.0254-6051.2020.10.020

新能源汽车用含稀土无取向硅钢生产过程中组织、织构演变

张净源¹, 任慧平^1,2, 金自力², 吴忠旺², 张继舜¹

1.内蒙古自治区白云鄂博矿多金属资源综合利用重点实验室, 内蒙古包头 014010;
2.内蒙古科技大学材料与冶金学院, 内蒙古包头 014010

收稿日期:2020-03-15 出版日期:2020-10-25 发布日期:2020-12-29
通讯作者: 任慧平,教授,E-mail:renhuiping@imust.edu.cn
作者简介:张净源(1995—),男,硕士研究生,主要研究方向为无取向硅钢的生产工艺,E-mail:1164651234@qq.com。
基金资助:
国家自然科学基金(51761033);内蒙古自然科学基金(2019MS05054)

Microstructure and texture evolution of rare-earth non-oriented silicon steel for new energy vehicles during production

Zhang Jingyuan¹, Ren Huiping^1,2, Jin Zili², Wu Zhongwang², Zhang Jishun¹

1. Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resource, Baotou Inner Mongolia 014010, China;
2. School of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou Inner Mongolia 014010, China

Received:2020-03-15 Online:2020-10-25 Published:2020-12-29

摘要/Abstract

摘要： 采用光学显微镜、X射线衍射仪及扫描电镜对含稀土无取向硅钢整个生产流程中的显微组织及织构演变进行研究。结果表明,热轧板在厚度方向上有显著的分层,即表层的再结晶层、过渡层、中间层的变形组织层,其织构主要包含铜型、黄铜型织构;正火后晶粒发生了完全再结晶,织构类型相对热轧基本无变化,但强度减弱;两次冷轧后的组织均为纤维组织,形成了以α、γ线性织构为主的织构类型,还出现了强度较高的反高斯织构如{001}<110>、{112}<110>、{111}<110>;脱碳退火后发生部分再结晶,织构相对于冷轧态α、γ线性织构强度均减小;在高温退火阶段晶粒发生再结晶,存在以{111}<112>、{111}<110>为主的γ织构,以及{100}<001>织构。

关键词: 新能源汽车, 无取向硅钢, 织构, 高强度

Abstract: Microstructure and texture evolution in the whole production process of non-oriented silicon steel containing rare earth were studied by means of optical microscope, X-ray diffractometer and scanning electron microscope. The results show that the hot-rolled sheet has significant delamination in the thickness direction, that is, the recrystallized layer of the surface layer, the transition layer, and the deformed structure layer of the intermediate layer, and the texture mainly includes copper-type and brass-type texture. After normalizing, the grains are completely recrystallized, and the texture type is basically unchanged from that of hot rolling, but the strength is weakened; the texture after two cold rolling is all fibrous, forming a texture type dominated by α and γ linear textures. There are also high-strength anti-Gaussian textures such as {001}<110>, {112}<110>, {111}<110>; partial recrystallization occurs after decarburization annealing, and the α and γ linear texture strength is reduced comparing to that after cold rolling; during the high temperature annealing stage, the crystal grains recrystallize, there are {111}<112>, {111}<110> mainly γ texture, and {100}<001> texture.

Key words: new energy vehicle, non-oriented silicon steel, texture, high strength

中图分类号:

TG142.1

张净源, 任慧平, 金自力, 吴忠旺, 张继舜. 新能源汽车用含稀土无取向硅钢生产过程中组织、织构演变[J]. 金属热处理, 2020, 45(10): 99-103.

Zhang Jingyuan, Ren Huiping, Jin Zili, Wu Zhongwang, Zhang Jishun. Microstructure and texture evolution of rare-earth non-oriented silicon steel for new energy vehicles during production[J]. Heat Treatment of Metals, 2020, 45(10): 99-103.

参考文献

[1]龚坚, 罗海文. 新能源汽车驱动电机用高强度无取向硅钢片的研究与进展[J]. 材料工程, 2015, 43(6): 102-112.
Gong Jian, Luo Haiwen. Progress on the research of high-strength non-oriented silicon steel sheets in traction motors of hybrid/electrical vehicles[J]. Journal of Materials Engineering, 2015, 43(6): 102-112.
[2]Komatsubara M, Sadahiro K, Kondo O, et al. Newly developed electrical steel for high-frequency use[J]. Journal of Magnetism and Magnetic Materials, 2002, 242-245: 212-215.
[3]毛卫民, 杨平. 电工钢的材料学原理[M]. 北京: 高等教育出版社, 2013.
Mao Weimin, Yang Ping. Material Science Principles on Electrical Steels[M]. Beijing: Higher Education Press, 2013.
[4]何忠治, 赵宇, 罗海文. 电工钢[M]. 北京: 冶金工业出版社, 2012.
[5]张正贵, 王大鹏. 无取向硅钢的织构与磁性[M]. 北京: 冶金工业出版社, 2012.
[6]邹翔, 项利, 仇圣桃, 等. 50W470无取向硅钢热轧板的组织与织构演变[J]. 金属热处理, 2017, 42(2): 7-11.
Zou Xiang, Xiang Li, Qiu Shengtao, et al. Microstructure and texture evolution of 50W470 non-oriented electrical steel hot rolled sheet[J]. Heat Treatment of Metals, 2017, 42(2): 7-11.
[7]Mehdi M, He Y, Hilinski E J, et al. Effect of skin pass rolling reduction rate on thetexture evolution of a non-oriented electrical steel after inclined cold rolling[J]. Journal of Magnetism and Magnetic Materials, 2017, 429: 148-160.
[8]汪勇. 正火和退火温度对2.4%Si冷轧无取向硅钢组织和织构的影响[C]//中国金属学会电工钢分会. 第十四届中国电工钢学术年会论文集. 2017: 8.
[9]蒲春雷, 李建军, 岳尔斌, 等. CSP制无取向硅钢热轧、常化、冷轧织构的演变[J]. 钢铁钒钛, 2012, 33(3): 65-69.
Pu Chunlei, Li Jianjun, Yue Erbin, et al. Evolution of hot rolled, normalized and cold rolled texture of non-oriented silicon steel produced by CSP[J]. Iron Steel Vanadium Titanium, 2012, 33(3): 65-69.
[10]张存来, 刘海涛, 张元祥, 等. 常化处理对2.9%Si+0.7%Al无取向硅钢织构及磁性能的影响[J]. 材料热处理学报, 2012, 33(10): 62-67.
Zhang Cunlai, Liu Haitao, Zhang Yuanxiang, et al. Effects of normalizing on texture and magnetic properties of 2.9%Si-0.7%Al non-oriented silicon steel[J]. Transactions of Materials and Heat Treatment, 2012, 33(10): 62-67.
[11]高振宇, 陈春梅, 胡洪旭, 等. 一次冷轧法生产高牌号硅钢组织织构演变行为分析[J]. 金属功能材料, 2017, 24(4): 44-49.
Gao Zhenyu, Chen Chunmei, Hu Hongxu, et al. The analysis of structure and texture evolution in one time cold rolled method of high grade silicon steel[J]. Metallic Functional Materials, 2017, 24(4): 44-49.
[12]李有智. 退火温度对高硅钢组织与硬度的影响[J]. 热加工工艺, 2016, 45(4): 225-227.
Li Youzhi. Effect of annealing temperature on microstructure and hardness of high silicon steel[J]. Hot Working Technology, 2016, 45(4): 225-227.
[13]He Y, Hilinski E J. Texture and magnetic properties of non-oriented electrical steels processed by an unconventional cold rolling scheme[J]. Journal of Magnetism and Magnetic Materials, 2016, 405: 337-352.
[14]鲁辉虎, 刘海涛, 杜凌云. 薄带连铸取向硅钢退火组织及织构演变研究[J]. 河北冶金, 2015(3): 10-13.
Lu Huihu, Liu Haitao, Du Lingyun. Study about annealing structure and thin continuous casting oriented silicon strip steel and texture evolution[J]. Hebei Metallurgy, 2015(3): 10-13.
[15]唐伟, 项利, 仇圣桃, 等. CSP流程试制50W270高牌号无取向硅钢织构的演变[J]. 北京科技大学学报, 2014, 36(9): 1189-1194.
Tang Wei, Xiang Li, Qiu Shengtao, et al. Texture evolution in 50W270 high-brand non-oriented silicon steel produced by CSP route[J]. Journal of University of Science and Technology Beijing, 2014, 36(9): 1189-1194.

新能源汽车用含稀土无取向硅钢生产过程中组织、织构演变

Microstructure and texture evolution of rare-earth non-oriented silicon steel for new energy vehicles during production

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王玉岱, 刘洋, 朱言言, 田象军, 程序, 冉先喆, 钱婷婷. 热处理对复合制造AerMet100超高强度钢组织均匀性与拉伸性能的影响[J]. 金属热处理, 2022, 47(4): 1-9.
[2]	陈连生, 张露友, 田亚强, 杨子旋, 李红斌, 潘红波, 魏英立. 低碳高强舰船用钢的CCT曲线及其组织性能[J]. 金属热处理, 2022, 47(4): 63-68.
[3]	宿鹏吉, 麻永林, 董丽丽, 杨雪峰. 磁场预退火处理对CGO钢组织与织构的影响[J]. 金属热处理, 2022, 47(4): 128-132.
[4]	余世伦, 张孝军, 孔玢, 刘正乔, 余伟, 蒋孟玲. 退火工艺对冷轧工业纯钛带卷各向异性的影响[J]. 金属热处理, 2022, 47(3): 82-87.
[5]	张世进, 李凯, 易丹青, 刘会群. 冷轧TA5钛合金退火过程的再结晶行为及织构演变[J]. 金属热处理, 2022, 47(2): 1-8.
[6]	董丽丽, 麻永林, 宿鹏吉, 杨雪峰. 脉冲磁场热处理对CGO取向硅钢脱碳退火过程中组织和织构的影响[J]. 金属热处理, 2022, 47(2): 31-34.
[7]	范合合, 金自力, 任慧平, 游兴华. 高Nb-Ti新能源汽车用无取向硅钢热轧过程的再结晶行为[J]. 金属热处理, 2022, 47(1): 88-93.
[8]	许峰, 肖颖, 陈前, 邓长春, 孙晓寒. 冷轧压下率对IF钢微结构、织构及深冲性能的影响[J]. 金属热处理, 2022, 47(1): 250-254.
[9]	蒋莺鸽, 黄继武, 江福清, 许成龙. 冷轧方式和退火温度对Al-4Cu-0.73Mg合金织构和微观组织的影响[J]. 金属热处理, 2021, 46(9): 58-64.
[10]	宫浩, 孔德斌, 郭立娜, 韩洪文, 宫晶晶, 房洪杰. 中间退火处理对AlMgSiCu铝合金冷轧板组织性能的影响[J]. 金属热处理, 2021, 46(9): 129-132.
[11]	蒙曰睿, 赵贤平, 周博文. 基于铁素体轧制工艺低碳铝镇静钢板r值降低原因分析[J]. 金属热处理, 2021, 46(9): 211-215.
[12]	王海波, 徐震霖, 胡学文, 彭欢. 热轧超高强度复相钢的氢脆敏感性[J]. 金属热处理, 2021, 46(8): 51-55.
[13]	刘靖宝, 田秀刚, 张杰, 魏焕君, 杨丽娜, 王朝, 李孟星. 低成本800 MPa级镀锌超高强度双相钢的微观组织与性能[J]. 金属热处理, 2021, 46(8): 73-76.
[14]	熊金生, 宁静, 苏杰, 姜庆伟. 固溶温度对G33超高强度钢微观组织和力学性能的影响[J]. 金属热处理, 2021, 46(7): 160-164.
[15]	焦丽, 商海昆, 何剑丰, 赵英军, 张伟民, 李卫民, 周兰梅. 柴油机用42CrMo钢高强度螺栓断裂失效分析[J]. 金属热处理, 2021, 46(6): 245-249.