Ti对等离子喷涂Fe-Al2O3-FeAl2O4复合涂层组织与性能的影响

doi:10.13251/j.issn.0254-6051.2020.04.042

金属热处理 ›› 2020, Vol. 45 ›› Issue (4): 199-203.DOI: 10.13251/j.issn.0254-6051.2020.04.042

Ti对等离子喷涂Fe-Al₂O₃-FeAl₂O₄复合涂层组织与性能的影响

宋劲松¹, 贾志宁², 张天旭¹, 徐晓东¹, 谢颖³, 阎殿然⁴

1. 承德石油高等专科学校工业中心, 河北承德 067000;
2. 承德石油高等专科学校河北省仪器仪表工程技术研究中心, 河北承德 067000;
3. 承德石油高等专科学校机械工程系, 河北承德 067000;
4. 河北工业大学材料科学与工程学院, 天津 300130

收稿日期:2019-09-20 出版日期:2020-04-25 发布日期:2020-05-08
通讯作者: 张天旭,E-mail:yejinztx@163.com
作者简介:宋劲松(1990—),男,讲师,主要从事表面工程及先进复合材料研究,E-mail:sjspc1@ 163.com
基金资助:
河北省高等学校科学技术研究项目(QN2019227)

Effect of Ti on microstructure and properties of plasma sprayed Fe-Al₂O₃-FeAl₂O₄ composite coating

Song Jinsong¹, Jia Zhining², Zhang Tianxu¹, Xu Xiaodong¹, Xie Ying³, Yan Dianran⁴

1. Industrial Center, Chengde Petroleum College, Chengde Hebei 067000, China;
2. Hebei Instrument & Meter Industry Technology Research Institute, Chengde Petroleum College, Chengde Hebei 067000, China;
3. Department of Mechanics, Chengde Petroleum College, Chengde Hebei 067000, China;
4. School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, China

Received:2019-09-20 Online:2020-04-25 Published:2020-05-08

摘要/Abstract

摘要： 通过反应等离子喷涂技术制备含Ti含量不同的金属-陶瓷纳米复合涂层。并利用XRD和SEM对该涂层的物相组成、结构及形貌进行研究。结果显示,该涂层中形成了FeAl₂O₄、Fe_xAl_y、TiO₂、Fe相以及铁钛尖晶石相。对其力学性能的研究表明,随着Ti含量的增加显微硬度逐渐降低,磨损性能逐渐升高,当Ti含量为10%时,复合涂层的综合力学性能最优。

关键词: 反应等离子喷涂, 金属-陶瓷纳米复合涂层, 铁铝尖晶石, 摩擦磨损

Abstract: Metal-ceramic nanocomposite coatings with different Ti contents were prepared by reaction plasma spraying. The phase composition, structure and morphology of the coating were analyzed by XRD and SEM. The results show that FeAl₂O₄, Fe_xAl_y, TiO₂, Fe phase as well as iron-titanium spinel phase are formed in the coating. The study of its mechanical properties shows that with the increase of Ti content, the microhardness gradually decreases, and the wear performance gradually increases. When the Ti content is 10%, the comprehensive mechanical properties of the composite coating are optimal.

Key words: reactive plasma spraying, metal-ceramic nanocomposite coating, iron-aluminum spinel, friction and wear

中图分类号:

TG174.4

宋劲松, 贾志宁, 张天旭, 徐晓东, 谢颖, 阎殿然. Ti对等离子喷涂Fe-Al₂O₃-FeAl₂O₄复合涂层组织与性能的影响[J]. 金属热处理, 2020, 45(4): 199-203.

Song Jinsong, Jia Zhining, Zhang Tianxu, Xu Xiaodong, Xie Ying, Yan Dianran. Effect of Ti on microstructure and properties of plasma sprayed Fe-Al₂O₃-FeAl₂O₄ composite coating[J]. Heat Treatment of Metals, 2020, 45(4): 199-203.

参考文献

[1]Vardelle A, Moreau C, Akedo J, et al. The 2016 thermal spray roadmap[J]. Journal of Thermal Spray Technology, 2016, 25(8): 1376-1440.
[2]Xu H F, Xiao J K, Zhang G, et al. Progress of thermal sprayed NiCrSi based wear-resistant coatings[J]. Surface Technology, 2016, 45(2): 109-117.
[3]Mi Pengbo, He Jining, Zhao Hongjian, et al. Effect of graphite addition on structure and properties of Ti(CN) coatings deposited by reactive plasma spraying[J]. Journal of Thermal Spray Technology, 2016, 25(8): 1588-1595.
[4]Yan D R, Yang Y, Dong Y C, et al. Reaction products and their solidification process of the plasma sprayed Fe₂O₃-Al composite powders[J]. Mater Chemistry and Physics, 2012, 133: 190-196.
[5]宋劲松. 反应等离子喷涂[(Cr_1-x, Al_x)₂O₃+Cr]共晶涂层组织调控及其性能研究[D]. 天津: 河北工业大学, 2016.
Song Jinsong. Study on[(Cr_1-x, Al_x)₂O₃+Cr] eutectic structure regulative mechanism and it's performance by reactive plasma spraying[D]. Tianjin: Hebei University of Technology, 2016.
[6]徐峰, 周小平, 方锳泽. 等离子喷涂制备镍基Al₂O₃-TiB₂金属陶瓷涂层[J]. 金属热处理, 2016, 41(10): 71-74.
Xu Feng, Zhou Xiaoping, Fang Yingze. Preparation of nickel-based Al₂O₃-TiB₂cermet coating by plasma spraying[J]. Heat Treatment of Metals, 2016, 41(10): 71-74.
[7]Wang L, Yan D R, Dong Y C, et al. Nanostructrured ceramic composite coating prepared by reactive plasma spraying micro-sized Al-Fe₂O₃ composite powders[J]. Ceram International, 2013, 39: 2437-2442.
[8]Yang Y, Yan D R, Dong Y C, et al. In situ nanostructured ceramic matrix composite coating prepared by reactive plasma spraying micro-sized Al-Fe₂O₃ composite powders[J]. Journal of Alloys and Compounds, 2011, 509(5): 90-94.
[9]Shen Jiagen, Zou Binglin, Cai Xiaolong, et al. Fabrication and properties of TiB₂-TiC reinforced NiAl coatings by reactive plasma spraying on AZ91D magnesium alloy[J]. Surface and Coatings Technology, 2019, 378(11): 1-10.
[10]Xu Jiaying, Zou Binglin, Fan Xizhi, et al. Reactive plasma spraying synthesis and characterization of TiB₂-TiC-Al₂O₃/Al composite coatings on a magnesium alloy[J]. Journal of Alloys and Compounds, 2014, 596(6): 10-18.

[1]	石铭霄, 王雄栋, 李敬勇, 杨志东, 茅卫东, 倪慧锋. AISI 410钢膏剂渗硼工艺渗层的组织与性能[J]. 金属热处理, 2022, 47(4): 245-250.
[2]	刘冉, 高苑, 吴韬. Al/Si比例对TC4合金表面激光熔覆Ti-Al-Si涂层组织与摩擦性能的影响[J]. 金属热处理, 2021, 46(3): 135-139.
[3]	余国庆, 景然, 王国迪, 张曼雪, 冯甜, 解念锁. MAO电压对TC4合金氧化膜层摩擦磨损性能的影响[J]. 金属热处理, 2021, 46(11): 126-130.
[4]	陈滋鑫, 周后明, 朱宇旭, 张哲豪, 何方佳, 徐采星, 刘刚. Cr12MoV钢激光熔覆Ni-Al复合涂层的组织及性能[J]. 金属热处理, 2021, 46(11): 226-231.
[5]	王钦娟, 林少阳, 陈忠士, 刘东. QPQ技术中渗氮时间对合金铸铁组织及摩擦性能的影响[J]. 金属热处理, 2021, 46(10): 226-231.
[6]	夏思海, 武美萍, 马毅青, 崔宸. TiC含量对TC4合金激光熔覆层组织和性能的影响[J]. 金属热处理, 2020, 45(6): 212-215.
[7]	刘冉, 王传婷, 高苑, 韦征杭, 傅超. 时效温度对Ti-29Nb-13Ta-4.6Zr合金组织及摩擦磨损性能的影响[J]. 金属热处理, 2020, 45(4): 124-127.
[8]	田武, 戴姣燕, 鲍明东, 张丽俊, 常勇强, 王世民, 于盛旺. 高温下硅锰相的演变及其对硅锰黄铜耐磨性能的影响[J]. 金属热处理, 2020, 45(3): 15-19.
[9]	朱爽, 刘云, 谢黎明, 郝世明. T6热处理对SiCp/Al复合材料摩擦磨损性能的影响[J]. 金属热处理, 2020, 45(3): 114-118.
[10]	杨振, 樊湘芳, 邱长军, 李勇, 柳宁. 激光功率对40CrNiMoA钢表面淬火组织和摩擦磨损性能的影响[J]. 金属热处理, 2020, 45(3): 128-132.
[11]	王永坤, 秦洪, 杨静, 缪学强, 刘惠娥, 陈超. 含氢类金刚石涂层在船用柴油机柱塞上的应用[J]. 金属热处理, 2020, 45(11): 226-231.
[12]	刘阳光, 许晓静, 宋振华, 汪洋, 朱亮亮, 朱劲松. 氧化镧添加剂和盐浴共渗温度对TC4钛合金硼氧共渗组织与性能的影响[J]. 金属热处理, 2020, 45(10): 180-186.
[13]	方慧敏, 张光胜, 夏莲森. 铁基粉末冶金材料渗硼强化的干滑动高温摩擦磨损行为[J]. 金属热处理, 2020, 45(1): 210-217.
[14]	周丹丹1，孙荣禄1,2. 扫描速度对激光熔覆Ni基h-BN复合涂层组织及性能的影响[J]. 金属热处理, 2017, 42(4): 167-171.
[15]	唐友亮1，蔡维平2，张锦1. 镍基复合材料涂层的激光熔覆制备及表征[J]. 金属热处理, 2017, 42(4): 180-184.

Ti对等离子喷涂Fe-Al₂O₃-FeAl₂O₄复合涂层组织与性能的影响

Effect of Ti on microstructure and properties of plasma sprayed Fe-Al₂O₃-FeAl₂O₄ composite coating

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价