金属型铸造条件下Sb元素对ZL114A合金共晶Si和拉伸性能的影响

doi:10.13251/j.issn.0254-6051.2021.11.006

金属热处理 ›› 2021, Vol. 46 ›› Issue (11): 36-41.DOI: 10.13251/j.issn.0254-6051.2021.11.006

金属型铸造条件下Sb元素对ZL114A合金共晶Si和拉伸性能的影响

刘东洋¹, 虞秀勇², 高文理¹, 陆政^3,4, 毛郭灵¹

1.湖南大学材料科学与工程学院, 湖南长沙 410082;
2.中建八局第一建设有限公司, 山东济南 250000;
3.中国航发北京航空材料研究院, 北京 100095;
4.北京市先进铝合金材料及应用工程技术研究中心, 北京 100095

收稿日期:2021-06-07 出版日期:2021-11-25 发布日期:2021-12-08
通讯作者: 高文理,教授,E-mail:wenligaohd@163.com
作者简介:刘东洋(1996—),男,硕士研究生,主要研究方向为铝锂合金的强韧化机理,E-mail:2416738252@qq.com
基金资助:
国家自然科学基金(51474101)

Effect of Sb on eutectic Si and tensile properties of permanent mold cast ZL114A alloy

Liu Dongyang¹, Yu Xiuyong², Gao Wenli¹, Lu Zheng^3,4, Mao Guoling¹

1. College of Materials Science and Engineering, Hunan University, Changsha Hunan 410082, China;
2. The First Company of China Eighth Engineering Division Ltd., Ji'nan Shandong 250000, China;
3. AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China;
4. Beijing Engineering Research Center of Advanced Aluminum Alloys and Applications, Beijing 100095, China

Received:2021-06-07 Online:2021-11-25 Published:2021-12-08

摘要/Abstract

摘要： ZL114A合金是我国自主研发的铸造亚共晶Al-Si合金,变质共晶Si是提高其室温综合拉伸性能的重要方法之一。利用室温拉伸试验、扫描电镜观察研究了Sb元素对金属型铸造条件下ZL114A合金铸态和热处理态组织以及性能的影响。结果表明,对于铸态的ZL114A合金,Sb的加入将共晶Si由板片状变质为纤维状或颗粒状;经过热处理的ZL114A合金,Sb的加入使共晶Si的长径比变小,球化程度更高。在金属型铸造条件下,Sb元素能够提高ZL114A合金铸态和热处理态的室温综合拉伸性能,热处理后添加Sb的合金的抗拉强度和伸长率远远高于我国航空标准所要求达到的值。综合考虑ZL114A合金铸态和热处理态的共晶Si相形貌以及室温拉伸性能,Sb元素的最佳含量(质量分数)为0.09%。

关键词: 亚共晶Al-Si合金, 金属型铸造, Sb元素, 变质共晶Si, 变质

Abstract: ZL114A alloy is a hypoeutectic Al-Si casting alloy independently developed in China, with eutectic Si modification being one of the most important methods to improve its comprehensive tensile properties at room temperature. Effect of Sb on microstructure and properties of the as-cast and heat-treated ZL114A alloy was studied by tensile test at room temperature and SEM observation. The results show that for the as-cast ZL114A alloy, the addition of Sb modifies the eutectic Si from plate-like to fibrous or granular. For the heat-treated ZL114A alloy, the addition of Sb makes the aspect ratio of eutectic Si smaller and the degree of spheroidization higher. The Sb addition can improve the comprehensive tensile properties of the ZL114A alloy at room temperature under the condition of permanent mold casting, the tensile strength and elongation of the ZL114A alloy with Sb addition after heat treatment are much higher than those required in the aviation standard of China. Comprehensive consideration of the morphologies of eutectic Si and the tensile properties at room temperature of the as-cast and heat-treated ZL114A alloy shows that, the optimal content of Sb is 0.09% (mass fraction).

Key words: hypoeutectic Al-Si alloy, permanent mold casting, Sb element, eutectic Si modification, modification

中图分类号:

TG223

刘东洋, 虞秀勇, 高文理, 陆政, 毛郭灵. 金属型铸造条件下Sb元素对ZL114A合金共晶Si和拉伸性能的影响[J]. 金属热处理, 2021, 46(11): 36-41.

Liu Dongyang, Yu Xiuyong, Gao Wenli, Lu Zheng, Mao Guoling. Effect of Sb on eutectic Si and tensile properties of permanent mold cast ZL114A alloy[J]. Heat Treatment of Metals, 2021, 46(11): 36-41.

参考文献

[1]刘文祎, 徐聪, 刘茂文, 等. 稀土元素Gd对Al-Si-Mg铸造合金微观组织和力学性能的影响[J]. 材料工程, 2019, 47(6): 133-139.
Liu Wenyi, Xu Cong, Liu Maowen, et al. Effect of rare earth element Gd on microstructure and mechanical properties of Al-Si-Mg cast alloy[J]. Journal of Materials Engineering, 2019, 47(6): 133-139.
[2]Mao G, Yan H, Zhu C, et al. The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al-Si alloy under conditions of different cooling rates[J]. Journal of Alloys and Compounds, 2019, 806: 909-916.
[3]熊梅. 热处理对Al-12Si建筑储能材料性能的影响分析[J]. 热加工工艺, 2014(20): 149-151.
Xiong Mei. Analysis on effect of heat treatment on properties of Al-12Si building energy storage materials[J]. Hot Working Technology, 2014(20): 149-151.
[4]Kocatepe K, Burdett C F. Effect of low frequency vibration on macro and micro structures of LM6 alloys[J]. Journal of Materials Science, 2000, 35(13): 3327-3335.
[5]Nafisi S, Emadi D, Shehata M T, et al. Effects of electromagnetic stirring and superheat on the microstructural characteristics of Al-Si-Fe alloy[J]. Materials Science & Engineering A, 2006, 432(1-2): 71-83.
[6]Hernández F C R, Sokolowski J H. Comparison among chemical and electromagnetic stirring and vibration melt treatments for Al-Si hypereutectic alloys[J]. Journal of Alloys and Compounds, 2006, 426(1-2): 205-212.
[7]Bian Xiufang, Wang Weimin, Qin Jingyu. Structure factors of modified liquid Al-Si alloys[J]. Science and Technology of Advanced Materials, 2001, 2(1): 19.
[8]Farahany S, Ourdjini A, Idris M H. The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al-Si alloys[J]. Journal of Thermal Analysis & Calorimetry, 2012, 109(1): 105-111.
[9]Hansen S C, Loper C R. Effect of antimony on the phase equilibrium of binary Al-Si alloys[J]. Calphad, 2000, 24(3): 339-352.
[10]刘志虎, 周亚军, 李岗. 锑在铝硅合金中变质机理分析[J]. 铸造技术, 2006, 27(8): 845-846.
Liu Zhihu, Zhou Yajun, Li Gang. Analysis of modification mechanism of Sb in Al-Si alloy[J]. Foundry Technology, 2006, 27(8): 845-846.
[11]Farahany S, Ourdjini A, Idrsi M H, et al. Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al-Si-Cu alloy (ADC12) by in situ thermal analysis[J]. Thermochimica Acta, 2013, 559: 59-68.
[12]Uzun O, Yilmaz F, Kölemen U, et al. Sb effect on micro structural and mechanical properties of rapidly solidified Al-12Si alloy[J]. Journal of Alloys & Compounds, 2011, 509(1): 21-26.
[13]Farahany Saeed, Ourdjini Ali. Effect of cooling rate and silicon refiner/modifier on solidification pathways of Al-11.3Si-2Cu-0.4Fe alloy[J]. Advanced Manufacturing Processes, 2013, 28(6): 657-663.
[14]Yu J M, Wanderka N, Rack A, et al. Influence of impurities, strontium addition and cooling rate on microstructure evolution in Al-10Si-0.3Fe casting alloys[J]. Journal of Alloys and Compounds, 2018, 766: 818-827.
[15]Xu C L, Wang H Y, Qiu F, et al. Cooling rate and microstructure of rapidly solidified Al-20wt.%Si alloy[J]. Materials Science & Engineering A, 2006, 417(1-2): 275-280.
[16]Chen R, Shi Y F, Xu Q Y, et al. Effect of cooling rate on solidification parameters and microstructure of Al-7Si-0.3Mg-0.15Fe alloy[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(6): 1645-1652.
[17]Najafabadi M A A, Ourdjini A, Elliott R. Impurity modification of aluminium-silicon eutectic alloys[J]. Journal of Materials Science, 1996, 31(14): 3731-3737.
[18]孟繁琴. 稀土和磷复合变质对过共晶铝-硅合金硅晶体形貌与力学性能的影响[J]. 稀土, 1998(2): 63-66.
Meng Fanqin. Influence of RE and P complex modification on the shape of silicon crystals and mechanical properties of hypereutectic Al-Si alloy[J]. Chinese Rare Earths, 1998(2): 63-66.
[19]Mousavi G S, Emamy M, Rassizadehghani J. The effect of mischmetal and heat treatment on the microstructure and tensile properties of A357 Al-Si casting alloy[J]. Materials Science & Engineering A, 2012, 556: 573-581.
[20]康福伟, 李如一, 乔昕, 等. 热处理工艺对ZL114A铝合金组织及力学性能的影响[J]. 哈尔滨理工大学学报, 2019, 24(1): 117-121.
Kang Fuwei, Li Ruyi, Qiao Xin, et al. Effects of heat treatment processing on the microstructure and mechanical properties of ZL114A aluminum alloy[J]. Journal of Harbin University of Science and Technology, 2019, 24(1): 117-121.
[21]黄彩敏, 杨琨, 石伟和. 热处理对A356铝合金组织与性能的影响[J]. 科技创业月刊, 2014(6): 205-206.
[22]李卫超, 邹勇志, 曾建民. 固溶温度和时间对ZL114A合金组织的影响[J]. 机械工程材料, 2008(11): 25-27.
Li Weichao, Zou Yongzhi, Zeng Jianmin. Influence of solution temperature and time on microstructure of ZL114A alloy[J]. Materials for Mechanical Engineering, 2008(11): 25-27.
[23]王艳丽, 王杰芳, 张建波. 共晶铝硅合金中硅相随固溶时间的变化[J]. 中国高新技术企业, 2010(19): 81-82.

金属型铸造条件下Sb元素对ZL114A合金共晶Si和拉伸性能的影响

Effect of Sb on eutectic Si and tensile properties of permanent mold cast ZL114A alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	赵二丽1,2，徐志成2. 变质和热处理对汽车用Al-Si合金组织与性能的影响[J]. 金属热处理, 2016, 41(6): 138-142.
[2]	李秀兰1，周新军1，谢文玲1，胡勇1，马幼平2. Al-Mg和V-Ti对Cr15铸铁初生碳化物变质机理的影响[J]. 金属热处理, 2015, 40(11): 132-135.