喷丸处理对不锈钢表面影响的研究

doi:10.13251/j.issn.0254-6051.2022.06.042

摘要/Abstract

摘要： 从喷丸强化方法对不锈钢表面硬度、磁性能、残余应力等方面进行了剖析,并综述了喷丸参数对不锈钢材料性能的影响,揭示喷丸强化机制,分析了喷丸对不锈钢残余应力的影响。详细介绍了材料属性与硬度的关系,以及喷丸时间、丸料大小等因素对不锈钢表面性能的影响,并展望了喷丸在不锈钢表面处理的发展方向。

关键词: 喷丸, 硬度, 微观组织, 残余应力

Abstract: Surface hardness, magnetic properties and residual stress of stainless steel were analyzed from the shot peening strengthening method, and the influence of shot peening parameters on stainless steel materials was reviewed, the mechanism of shot peening is revealed, and the effect of shot peening on the residual stress in stainless steel was analyzed. The relationships between material properties and hardness, and the effects of shot peening time and shot size on the surface properties of stainless steel are introduced in detail, and the development direction of shot peening on stainless steel surfaces treatment is prospected.

Key words: shot peening, hardness, microstructure, residual stress

中图分类号:

TG176

张俊双, 刘凤铃, 唐涛, 陈泷, 兰伟. 喷丸处理对不锈钢表面影响的研究[J]. 金属热处理, 2022, 47(6): 232-239.

Zhang Junshuang, Liu Fengling, Tang Tao, Chen Long, Lan Wei. Research of impact of shot peening on stainless steel surface[J]. Heat Treatment of Metals, 2022, 47(6): 232-239.

参考文献

[1]谌康, 蔡文河, 杜双明, 等. 喷丸对马氏体耐热钢高温蒸汽氧化行为的影响[J]. 金属热处理, 2021, 46(2): 66-73.
Chen Kang, Cai Wenhe, Du Shuangming, et al. Effect of shot peening on high-temperature steam oxidation behavior of martensitic heat-resistant steel[J]. Heat Treatment of Metals, 2021, 46(2): 66-73.
[2]黄舒. 激光喷丸强化铝合金的疲劳裂纹扩展特性及延寿机理研究[D]. 镇江: 江苏大学, 2012.
[3]张雪. 疲劳短裂纹在残余应力场中的闭合和扩展[J]. 机械强度, 2000, 22(2): 137-138, 123.
Zhang Xue. Fatigue short through-thickness crack closure and growth in the residual stress field[J]. Journal of Mechanical Strength, 2000, 22(2): 137-138, 123.
[4]王学德, 聂祥樊, 臧顺来, 等. 激光冲击强化“残余应力洞”的形成机制[J]. 强激光与粒子束, 2014, 26(11): 306-310.
Wang Xuede, Nie Xiangfan, Zang Shunlai, et al. Formation mechanism of “residual stress hole” induced by laser shock peening[J]. High Power Laser and Particle Beams, 2014, 26(11): 306-310.
[5]Wang G Q, Zhu X P, Lei M K, et al. Inverse surface integrity problem in ultrasonic impact-treated AISI 304 stainless steel components[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(5): 2033-2040.
[6]Dounde A A, Seemikeri C Y, Tanpure P R. Study of shot peening process and their effect on surface properties: A review[J]. International Journal of Engineering, Business and Enterprise Applications, 2015, 2(12): 104-107.
[7]李玉晓, 史大琳, 曹兴忠, 等. 奥氏体316不锈钢微观缺陷的热演化[J]. 郑州大学学报(理学版), 2020, 52(2): 89-94, 101.
Li Yuxiao, Shi Dalin, Cao Xingzhong, et al. Thermal evolution of micro-defects in type-316 austenitic stainless steel[J]. Journal of Zhengzhou University (Natural Science Edition), 2020, 52(2): 89-94, 101.
[8]朱鹏飞, 严宏志, 陈志, 等. 齿轮齿面喷丸强化研究现状与展望[J]. 表面技术, 2020, 49(4): 113-131, 140.
Zhu Pengfei, Yan Hongzhi, Chen Zhi, et al. Research status and prospect of shot peening of gear tooth flanks[J]. Surface Technology, 2020, 49(4): 113-131, 140.
[9]Wen A L, Wang S W, Ren R M, et al. Effect of combined shot peening process for surface nanocrystallization method on fatigue strength of TC4[J]. Advanced Materials Research, 2010, 97(101): 2217-2217.
[10]董星, 王瑞红, 段雄. 水射流喷丸强化的试验研究[J]. 煤炭学报, 2014, 39(3): 568-573.
Dong Xing, Wang Ruihong, Duan Xiong. Test research of water jet peening strengthening[J]. Journal of China Coal Society, 2014, 39(3): 568-573.
[11]辛立正. 喷丸强化工艺的喷丸强度测试与分析[J]. 工具技术, 2018, 52(5): 87-90.
Xin Lizheng. Shot peening process design intensity[J]. Tool Engineering, 2018, 52(5): 87-90.
[12]Holmberg J, Wretland A, Berglund J, et al. Surface integrity after post processing of EDM processed Inconel 718 shaft[J]. The International Journal of Advanced Manufacturing Technology, 2018, 95(5): 2325-2337.
[13]Ye Q, Nguyen V, Melkote S, et al. Wear of WC inserts textured by shot peening and electrical discharge machining[J]. Wear, 2020, 452: 203-207.
[14]鲜鹏, 李军. 喷丸技术的发展与研究[J]. 金属世界, 2020(1): 32-36.
Xian Peng, Li Jun. Research and application of shot peen technology[J]. Metal World, 2020(1): 32-36.
[15]Faith R. ASM Handbook: Volume 5: Surface Engineering[M]. OH: ASM International, 1994.
[16]Davim J P. Surface Integrity in Machining[M]. London: Springer, 2010.
[17]Hisamatsu S, Kanazawa T. Improvement of carburized gear strength by shot peening[J]. Journal of the Society of Automotive Engineers of Japan, 1987, 41(7): 722-728.
[18]Farajian M, Hardenacke V, Klaus M, et al. Numericalstudies of shot peening of high strength steels and the related experimental investigations by means of hole drilling, X-ray and synchrotron diffraction analysis[C]// International Conference on Shot Peening ICSP12. 2014.
[19]Higounenc O. Correlation of shot peening parameters to surface characteristic[C]// International Conference on Shot Peening ICSP12.
[20]Schiffner K, Helling C D G. Simulation of residual stresses by shot peening[J]. Computers and Structures, 1999, 72(1-3): 329-340.
[21]Champaigne J. Shot peening process variables[J]. Shot Peener, 1993, 7(3): 16-19.
[22]周慧敏. 30CrMnSiNi2A高强钢热变形行为研究[D]. 重庆: 重庆大学, 2019.
[23]王仁智. 金属材料的喷丸强化原理及其强化机理综述[J]. 中国表面工程, 2012, 25(6): 1-9.
Wang Renzhi. Overview on the shot peening principle and its strengthening mechanisms for metallic materials[J]. China Surface Engineering, 2012, 25(6): 1-9.
[24]Sipos K, Remy L, Pineau A. Influence of austenite predeformation on mechanical properties and strain-induced martensitic transformations of a high manganese steel[J]. Metallurgical and Materials Transactions A, 1976, 7(5): 857-864.
[25]Hou C K. Effect of rolling strain on the loss separation and permeability of lamination steels[J]. IEEE Transactions on Magnetics, 2002, 30(2): 212-216.
[26]Hug E, Hubert O, Clavel M. Some aspects of the magnetomechanical coupling in the strengthening of nonoriented and grain-oriented 3% SiFe alloys[J]. IEEE Transactions on Magnetics, 2017, 33(1): 763-771.
[27]Hwang D G, Kim H C. The influence of plastic deformation on Barkhausen effects and magnetic properties in mild steel[J]. Journal of Physics D Applied Physics, 2000, 21(12): 1807-1813.
[28]Landgraf F J G, Emura M, Ito K, et al. Effect of plastic deformation on the magnetic properties of non-oriented electrical steels[J]. Journal of Magnetism and Magnetic Materials, 2000, 215-216: 94-96.
[29]Li K, Xie J, Chen D, et al. Observation of magnetic properties and microstructural evolution of 301 stainless steel upon ultrasonic shot peening[J]. Materialia, 2020, 10: 100651.
[30]王仁智, 汝继来, 李向斌, 等. 疲劳裂纹萌生的微细观过程与内部疲劳极限理论[J]. 金属热处理学报, 1995(4): 26-34.
Wang Renzhi, Ru Jilai, Li Xiangbin, et al. A micro-meso-process theory of fatigue crack initiation and theory internal fatigue limit[J]. Journal of Metal Heat Treatment, 1995(4): 26-34.
[31]王超, 张海, 李冬飞, 等. 微粒子喷丸对靶材残余应力场的影响[J]. 金属热处理, 2020, 45(5): 192-199.
Wang Chao, Zhang Hai, Li Dongfei, et al. Effect of microparticle shot peening on residual stress field of target[J]. Heat Treatment of Metals, 2020, 45(5): 192-199.
[32]王成, 李开发, 胡兴远, 等. 喷丸强化残余应力对AISI 304不锈钢疲劳裂纹扩展行为的影响[J]. 表面技术, 2021, 50(9): 81-90, 151.
Wang Cheng, Li Kaifa, Hu Xingyuan, et al. Effects ofshot peening-induced residual stresses on fatigue crack propagation behavior of AISI 304 stainless steel[J]. Surface Technology, 2021, 50(9): 81-90, 151.
[33]Kim H J, Wallace J F. Effects of EDM and its mitigation by surface modification on thermal fatigue properties[J]. Surface Engineering, 1994, 10(1): 56-64
[34]Tang J, Yang X. Simulation investigation of thermal phase transformation and residual stress in single pulse EDM of Ti-6Al-4V[J]. Journal of Physics D Applied Physics, 2018, 51(13): 135-138.
[35]Salvati E, Korsunsky A M. Micro-scale measurement & FEM modelling of residual stresses in AA6082-T6 Al alloy generated by wire EDM cutting[J]. Journal of Materials Processing Technology, 2020, 275: 116373.
[36]Li Kejian, Xie Jing, Chen Dengming, et al. , Observation of magnetic properties and microstructural evolution of 301 stainless steel upon ultrasonic shot peening[J]. Materialia, 2020, 10: 100651.
[37]吴少杰, 刘怀举, 张仁华, 等. 基于正交实验和数据驱动的喷丸表面完整性参数预测[J]. 表面技术, 2021, 50(4): 86-95.
Wu Shaojie, Liu Huaiju, Zhang Renhua, et al. Prediction of surface integrity parameters of shot peening based on orthogonal experiment and data-driven[J]. Surface Technology, 2021, 50(4): 86-95.
[38]王超, 张海, 李冬飞, 等. 靶材性能对微粒子喷丸残余应力场的影响[J]. 金属热处理, 2019, 44(12): 238-243.
Wang Chao, Zhang Hai, Li Dongfei, et al. Effect of target properties on residual stress field of microshot peening[J]. Heat Treatment of Metals, 2019, 44(12): 238-243.
[39]Guo F A, Trannoy N, Lu J. Analysis of thermal properties by scanning thermal microscopy in nanocrystallized iron surface induced by ultrasonic shot peening[J]. Materials Science and Engineering A, 2003, 369(4): 36-42.
[40]Mordyuk B N, Prokopenko G I, Vasylyev M A, et al. Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel[J]. Materials Science and Engineering A, 2006, 458(1-2): 253-261.
[41]Marteau J, Bigerelle M, Mazeran P E, et al. Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening[J]. Tribology International, 2015, 82: 319-329.
[42]Li K, Shin K, Cao P. Strain-induced phase transformation and nanocrystallization of 301 metastable stainless steel upon ultrasonic shot peening[J]. Metallurgical and Materials Transactions A, 2018, 49: 4435-4440.