分级时效对TB9钛合金芯杆力学性能及组织的影响

doi:10.13251/j.issn.0254-6051.2023.12.011

金属热处理 ›› 2023, Vol. 48 ›› Issue (12): 74-78.DOI: 10.13251/j.issn.0254-6051.2023.12.011

分级时效对TB9钛合金芯杆力学性能及组织的影响

刘彤, 齐跃, 高伟, 周颖, 孙虹烨

航天精工股份有限公司, 天津 300300

收稿日期:2023-07-17 修回日期:2023-10-15 出版日期:2023-12-25 发布日期:2024-01-29
作者简介:刘彤(1991—),女,工程师,硕士,主要研究方向为航空航天紧固连接技术、材料应用,E-mail:liutong1510618@126.com
基金资助:
航天精工股份有限公司TB9芯杆性能稳定性工艺研究攻关课题(XM2022-JX4)

Effect of grading aging on mechanical properties and microstructure of TB9 titanium alloy core rod

Liu Tong, Qi Yue, Gao Wei, Zhou Ying, Sun Hongye

Aerospace Precision Products Co., Ltd., Tianjin 300300, China

Received:2023-07-17 Revised:2023-10-15 Online:2023-12-25 Published:2024-01-29

摘要/Abstract

摘要： 依托某型号航天用TB9钛合金芯杆,研究了分级时效下TB9合金力学性能及微观组织的变化特点。结果表明,经过480~530 ℃×6~10 h单级时效处理后,TB9合金抗拉强度、硬度随着时效温度的升高而下降,超过530 ℃时晶粒有长大趋势。随着保温时间的延长,抗拉强度在480 ℃时出现增长趋势,最大值达到1698 MPa,530 ℃时强度呈明显下降趋势,下降近200 MPa。而双级时效处理可以有效消除或抑制合金中ω脆性相生成、均匀组织,同时提高TB9钛合金芯杆拉伸力值和断裂韧性,其综合性能更能满足高性能β合金紧固件的使用要求。

关键词: TB9钛合金, 分级时效, 芯杆, 力学性能, 显微组织

Abstract: Mechanical properties and microstructure of a certain type of aerospace TB9 titanium alloy core rod after stepped aging were studied. The results show that the tensile strength and hardness of the TB9 alloy decrease with the increase of aging temperature after single-stage aging at 480-530 ℃ for 6-10 h, and the grain size tends to grow when the aging temperature exceeds 530 ℃. With the increase of aging time, the tensile strength shows an increasing trend at 480 ℃, and the maximum value reaches 1698 MPa. At 530 ℃, the strength shows an obvious downward trend, decreasing by nearly 200 MPa. Short time high temperature treatment before single-stage aging can effectively eliminate or inhibit the formation of brittle phase and uniform structure. At the same time, the tensile force and fracture toughness of the TB9 titanium alloy core rod are improved, so that the comprehensive properties can meet the requirements of high properties β alloy fasteners.

Key words: TB9 titanium alloy, graded aging, core rod, mechanical properties, microstructure

中图分类号:

TG146.2⁺3

刘彤, 齐跃, 高伟, 周颖, 孙虹烨. 分级时效对TB9钛合金芯杆力学性能及组织的影响[J]. 金属热处理, 2023, 48(12): 74-78.

Liu Tong, Qi Yue, Gao Wei, Zhou Ying, Sun Hongye. Effect of grading aging on mechanical properties and microstructure of TB9 titanium alloy core rod[J]. Heat Treatment of Metals, 2023, 48(12): 74-78.

参考文献

[1]Tian Y X, Li S J, Hao Y L, et al. High temperature deformation behavior and microstructure evolution mechanism transformation Ti2448 alloy[J]. Acta Metallurgica Sinica, 2012, 48(7): 837-844.
[2]师俊峰, 韩珍梅. 航空紧固件钛合金材料的应用现状[J]. 机械管理开发, 2020, 35(5): 258-259.
Shi Junfeng, Han Zhenmei. Application status of titanium alloy materials for aviation fasteners[J]. Mechanical Management and Development, 2020, 35(5): 258-259.
[3]李蒙, 凤伟中, 关蕾, 等. 航空航天紧固件用钛合金材料综述[J]. 有色金属材料与工程, 2018, 39(4): 49-53.
Li Meng, Feng Weizhong, Guan Lei, et al. Summary of titanium alloy for fastener in aerospace[J]. Nonferrous Metal Materials and Engineering, 2018, 39(4): 49-53.
[4]李雷, 罗斌莉, 杨宏进, 等. 固溶时效处理对TB9钛合金棒材组织与性能及其弹簧弹性的影响[J]. 钛工业进展, 2012, 9(5): 30-32.
Li Lei, Luo Binli, Yang Hongjin, et al. Impact of solution and aging treatment on the properties of TB9 alloy and its spring[J]. Titanium Industry Progress, 2012, 9(5): 30-32.
[5]王健, 黄鎏杰, 金伟. 热处理对TB9合金力学性能及显微组织的影响[J]. 稀有金属材料与工程, 2017, 46(S1): 129-133.
Wang Jian, Huang Liujie, Jin Wei. Effect of heat treatment on mechanical properties and microstructure of TB9 alloy[J]. Rare Metal Materials and Engineering, 2017, 46(S1): 129-133.
[6]Faller Kurt. Titanium suspension springs for production motorcycles-less costly alloy brings titanium's benefits to motocross rear suspension springs[J]. Springs, 2006, 45(3): 49-50.
[7]赵庆云, 程思锐, 黄宏. 1240 MPa级Ti-38644高锁螺栓的拉伸疲劳增寿机理[J]. 材料研究学报, 2019, 33(10): 735-741.
Zhao Qingyun, Cheng Sirui, Huang Hong. Mechanism of fatigue life enhancement for 1240 MPa Hi-lock bolt of Ti-38644 Ti-alloy[J]. Chinese Journal of Materials Research, 2019, 33(10): 735-741.
[8]Huang L J, Wang J, Zhang H B, et al. Effects of cold drawing deformation and aging temperature on microstructure and mechanical properties of TB9 titanium alloy[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(1): 11-14.
[9]董瑞峰, 李金山, 唐斌, 等. 航空紧固件用钛合金材料发展现状[J]. 航空制造技术, 2018, 61(4): 86-91.
Dong Ruifeng, Li Jinshan, Tang Bin, et al. Research development of titanium for fastener application in aerospace[J]. Aeronautical Manufacturing Technology, 2018, 61(4): 86-91.
[10]胡志杰, 冯军宁, 马忠贤, 等. 我国钛及钛合金热处理标准现状[J]. 金属热处理, 2021, 46(3): 243-246.
Hu Zhijie, Feng Junning, Ma Zhongxian, et al. Current status of heat treatment standards of titanium and titanium alloys[J]. Heat Treatment of Metals, 2021, 46(3): 243-246.
[11]何丹, 王庆娟, 高颀. 新型β钛合金时效析出相的演变及硬化[J]. 稀有金属, 2016, 40(7): 633-639.
He Dan, Wang Qingjuan, Gao Qi. Evolution and hardening of age-precipitates of new β titanium alloy[J]. Chinese Journal of Rare Metals, 2016, 40(7): 633-639.
[12]尹仁锟. 新型超高强β钛合金相析出特性研究[D]. 西安: 西安建筑科技大学, 2016.
Yin Renkun. Study on phase precipitation characteristics of new ultra-high strength β titanium alloy[D]. Xi'an: Xi'an University of Architecture and Technology, 2016.
[13]肖树龙, 陈兆琦, 荆科, 等. 热处理对亚稳β钛合金显微组织与性能的影响[J]. 中国有色金属学报, 2022, 32(6): 1655-1664.
Xiao Shulong, Chen Zhaoqi, Jing Ke, et al. Effect of heat treatment on microstructure and properties of metastable β titanium alloy[J]. The Chinese Journal of Nonferrous Metals, 2022, 32(6): 1655-1664.
[14]Zheng J. Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloys[J]. Acta Materialia, 2016, 103: 850-858.
[15]盖晋阳, 程军, 于振涛, 等. β型钛合金细化α析出相的方法及研究现状[J]. 热加工工艺, 2020, 49(14): 1-5.
Gai Jinyang, Cheng Jun, Yu Zhentao, et al. Methods and research status of refinement of α precipitates in β-type titanium alloy[J]. Hot Working Technology, 2020, 49(14): 1-5.

分级时效对TB9钛合金芯杆力学性能及组织的影响

Effect of grading aging on mechanical properties and microstructure of TB9 titanium alloy core rod

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	孙博, 聂佳民, 李晓丹, 何长树. 强制冷却和低温时效对2198-T3/7A04-T6异种铝合金FSW接头组织及性能的影响[J]. 金属热处理, 2023, 48(9): 8-13.
[2]	崔毅, 崔继红, 王艳, 张雲飞, 俞峰, 赵英利, 曹文全. 淬火工艺对GCr4Mo4V钢组织及耐磨性的影响[J]. 金属热处理, 2023, 48(9): 23-29.
[3]	王毅, 韩杰, 刘超, 邓玲蕊, 李辉, 许荣昌. DQ-T工艺对1000 MPa级高强钢组织和性能的影响[J]. 金属热处理, 2023, 48(9): 30-34.
[4]	韩伟松, 杜峰, 李建锋, 朱宝辉, 沈立华, 刘意, 王鹏. 变形量对Ti80G合金力学性能的影响[J]. 金属热处理, 2023, 48(9): 95-98.
[5]	宋操, 王晓东, 包喜荣, 陈林, 汤雪娇. Ce对30MnNbRE钢淬火回火微观组织和力学性能的影响[J]. 金属热处理, 2023, 48(9): 143-149.
[6]	李文刚, 炊鹏飞, 程尊鹏, 李春梅, 景然, 李江华, 廖仲尼. 硼含量对Ti-Zr-Nb-B合金显微组织及性能的影响[J]. 金属热处理, 2023, 48(9): 157-164.
[7]	戴钊, 郭智, 龙晓燕, 冯晓勇, 刘伟, 张福成, 李艳国. Si含量对高碳贝氏体钢微观组织与性能的影响[J]. 金属热处理, 2023, 48(9): 165-173.
[8]	谢尚恒, 孙有平, 朱嘉欣, 方德俊. 微量Zr对深冷轧制Al-Cu-Mg合金微观组织及性能的影响[J]. 金属热处理, 2023, 48(9): 174-179.
[9]	王英虎. 硫含量对Y12Cr18Ni9易切削钢中硫化物形态及性能的影响[J]. 金属热处理, 2023, 48(9): 183-190.
[10]	李鑫, 武志广, 赵吉庆, 杨钢. 20Cr1Mo1VTiB螺栓钢高温长期时效后的组织演变及力学性能[J]. 金属热处理, 2023, 48(9): 197-202.
[11]	张志春, 温佳, 陈国瑞, 吴广辉, 翁泽钜, 顾开选. 低合金耐磨钢的热处理工艺及力学性能[J]. 金属热处理, 2023, 48(9): 220-224.
[12]	王娇娇, 刘宏春, 刘泳, 陈红卫, 田志强, 张洪起. 一种宽回火时间窗口的10.9级螺栓钢组织和性能[J]. 金属热处理, 2023, 48(9): 233-237.
[13]	刘永珍, 董丽丽, 刘宝志, 张浩, 麻永林. 3.1%Si取向硅钢显微组织和宏观织构演变[J]. 金属热处理, 2023, 48(9): 238-241.
[14]	李子岩, 许鸿翔, 陈业生, 刘志强, 郭敬强, 陈岩, 赵少甫. 42CrMo钢低速轴止推环调质开裂失效分析[J]. 金属热处理, 2023, 48(9): 283-287.
[15]	梁恩溥, 徐乐, 杨勇, 王毛球. Ni含量对NiAl-Cu强化40CrNi3MoV钢组织和力学性能的影响[J]. 金属热处理, 2023, 48(8): 1-7.