37Mn5钢厚壁石油套管表面裂纹成因分析与控制

doi:10.13251/j.issn.0254-6051.2023.07.046

金属热处理 ›› 2023, Vol. 48 ›› Issue (7): 277-282.DOI: 10.13251/j.issn.0254-6051.2023.07.046

37Mn5钢厚壁石油套管表面裂纹成因分析与控制

任芝兰¹, 唐明华^1,2, 毕红霞¹, 吴远志^1,2, 周勇³

1.湖南工学院智能制造与机械工程学院, 湖南衡阳 421002;
2.湖南工学院材料科学与工程学院, 湖南衡阳 421002;
3.衡阳华菱钢管有限公司技术中心, 湖南衡阳 421001

收稿日期:2022-03-18 修回日期:2023-02-10 出版日期:2023-07-25 发布日期:2023-09-04
作者简介:任芝兰(1970—),女,副教授,硕士,主要研究方向为金属材料强韧化理论与技术,E-mail: rzhlan@163.com。
基金资助:
湖南省衡阳市科技创新资助项目 (200250045140)

Cause analysis and control of surface cracking of 37Mn5 steel thick-walled oil casing

Ren Zhilan¹, Tang Minghua^1,2, Bi Hongxia¹, Wu Yuanzhi^1,2, Zhou Yong³

1. School of Intelligent Manufacturing and Mechanical Engineering, Hunan Institute of Technology, Hengyang Hunan 421002, China;
2. School of Materials Science and Engineering, Hunan Institute of Technology, Hengyang Hunan 421002, China;
3. Technology Center, Hengyang Valin Steel Tube Group Co., Ltd., Hengyang Hunan 421001, China

Received:2022-03-18 Revised:2023-02-10 Online:2023-07-25 Published:2023-09-04

摘要/Abstract

摘要： 37Mn5钢厚壁石油套管在调质处理后发现表面裂纹,利用SEM、EDS及TEM等手段进行了裂纹成因分析和工艺改进试验研究。结果表明,钢管表面的裂纹是因为钢中非金属夹杂物、淬火应力集中和高温回火脆性等因素耦合作用的结果,夹杂物在轧制过程中诱发了微裂纹的产生,在淬火内应力的作用下微裂纹得到进一步扩展延伸,再加上高温回火脆性降低了材料的韧性,最终在钢管表面形成一定深度的宏观裂纹。石油套管采用改进的亚温淬火工艺处理后,可以在基本不降低材料强度的前提下,明显提高冲击韧性和抗断裂失效能力,抑制高温回火脆性,基本杜绝了表面开裂现象,取得了良好的生产应用效果。

关键词: 37Mn5钢, 表面裂纹, 亚温淬火, 组织与性能

Abstract: Surface cracks were found on 37Mn5 steel thick-walled oil casing after quenching and high-temperature treatment, the analysis of cracking causes and research of process improvement were carried out by means of SEM, EDS and TEM. The results show that the cracks on the surface of the 37Mn5 steel oil casing are because of multiple factors coupling such as non-metallic inclusions in the steel, quenching stress concentration and high-temperature tempering brittleness, inclusions induce micro-cracking during the rolling process, the micro-crack is further expansion and extension under the action of quenching internal stress, coupled with the high temperature tempering brittleness reduces the toughness of the material, eventually a certain depth of macro cracks are formed on the surface of the pipe. By using improved sub-temperature quenching process treatment, the impact toughness of the 37Mn5 steel oil casing is significantly improved and the resistance to fracture failure on the premise basically not reduce the strength of material, inhibits high-temperature temper brittleness, basically eliminating the surface cracking phenomenon, and achieving good production application results.

Key words: 37Mn5V steel, surface cracks, sub-temperature quenching, microstructure and properties

中图分类号:

TG162.7

任芝兰, 唐明华, 毕红霞, 吴远志, 周勇. 37Mn5钢厚壁石油套管表面裂纹成因分析与控制[J]. 金属热处理, 2023, 48(7): 277-282.

Ren Zhilan, Tang Minghua, Bi Hongxia, Wu Yuanzhi, Zhou Yong. Cause analysis and control of surface cracking of 37Mn5 steel thick-walled oil casing[J]. Heat Treatment of Metals, 2023, 48(7): 277-282.

参考文献

[1]米永峰, 刘玉荣, 宋歌, 等. J55石油套管显微组织与冲击性能研究[J]. 包钢科技, 2021, 47(3): 1-4.
Mi Yongfeng, Liu Yurong, Song Ge, et al. Study on microstructure and impact property of J55 oil casing[J]. Science and Technology of Baotou Steel, 2021, 47(3): 1-4.
[2]李亚欣, 刘雅政, 周乐育, 等. 石油套管淬火冷却中三维耦合场的有限元模拟[J]. 材料热处理学报, 2011, 32(1): 150-154.
Li Yaxin, Liu Yazheng, Zhou Leyu, et al. FEM simulation of 3-dimensional coupled field for oil casing in quenching process[J]. Transactions of Materials and Heat Treatment, 2011, 32(1): 150-154.
[3]王锦永, 张亚彬, 陈明义, 等. 淬火工艺对110钢级37Mn5厚壁钢管组织性能的影响[J]. 钢管, 2020, 49(5): 61-64.
Wang Jinyong, Zhang Yabin, Chen Mingyi, et al. Effect by quenching process on microstructure and properties of 37Mn5 heavy-walled steel pipe[J]Steel Pipe, 2020, 49(5): 61-64.
[4]李英真, 李玲霞, 冯传宁, 等. 37Mn5钢的连续冷却转变曲线[J]. 金属热处理, 2016, 41(4): 83-86.
Li Yingzhen, Li Lingxia, Feng Chuanning, et al. Continuous cooling transformation curve of 37Mn5 steel[J]. Heat Treatment of Metals, 2016, 41(4): 83-86.
[5]曹晶晶, 赵文武, 李阳, 等. 37Mn5热轧钢管内壁裂纹失效分析[J]. 金属热处理, 2016, 41(1): 228-231.
Cao Jingjing, Zhao Wenwu, Li Yang, et al. Failure analysis on inner surface crack of 37Mn5 hot-rolled steel tube[J]. Heat Treatment of Metals, 2016, 41(1): 228-231.
[6]王松林, 陈俊德, 赵成英. 消除钢管中带状组织的热处理[J]. 热处理技术与装备, 2010, 31(4): 26-33. .
Wang Songlin, Chen Junde, Zhao Chengying. Heat treatment for eliminating banded structure in the steel tube[J]. Heat Treatment Technology and Equipment, 2010, 31(4): 26-33.
[7]巢昺轩, 王宝龙, 蒋克全. 30CrMnSiA钢回火脆性控制与预防技术研究[J]热处理技术与装备, 2019, 40(4): 15-19.
Chao Bingxuan, Wang Baolong, Jiang Kequan. Research on control and prevention technology for temper brittleness of 30CrMnSiA steel[J]. Heat Treatment Technology and Equipment, 2019, 40(4): 15-19.
[8]徐立善, 余伟, 张烨铭, 等. 调质低碳贝氏体钢的组织和性能[J]. 北京科技大学学报, 2012, 34(2): 125-131.
Xu Lishan, Yu Wei, Zhang Yeming, et al. Microstructure and mechanical properties of low carbon bainite steel treated by quenching and tempering[J]. Journal of University of Science and Technology Beijing, 2012, 34(2): 125-131.
[9]李安铭, 王海瑞. 亚温淬火对25MnV钢显微组织和力学性能的影响[J]. 机械工程材料, 2009, 33(4): 36-38.
Li Anming, Wang Hairui. Effect of sub-temperature quenching on micro-structure and properties of 25MnV steel[J]. Materials for Mechanical Engineering, 2009, 33(4): 36-38.
[10]胡赓祥, 蔡珣, 戎咏华, 等. 材料科学基础[M]. 上海: 上海交通大学出版社, 2006.
[11]赵乃勤. 合金固态相变[M]. 长沙: 中南大学出版社, 2008.

[1]	徐志刚, 杨阳, 杨中娜, 药小江, 秦才会, 王海朋, 刘亮. 表面强化对随钻测井设备用C17200铍青铜基体组织和性能的影响[J]. 金属热处理, 2023, 48(6): 107-113.
[2]	郭宝昌, 姜凤阳, 王俊勃, 刘江南, 刘浪浪. 退火工艺对FeCrMnNiAl_0.1高熵合金显微组织及力学性能的影响[J]. 金属热处理, 2023, 48(5): 246-251.
[3]	李阳, 张威, 袁刚. 冷变形及退火工艺对低温用奥氏体不锈钢组织性能的影响[J]. 金属热处理, 2023, 48(2): 219-222.
[4]	孙永真, 程巨强, 赵翛涵. 回火温度对40CrMoVNbTi钢组织和性能的影响[J]. 金属热处理, 2023, 48(1): 193-197.
[5]	周泽宇, 花福安. 快速加热和短时保温对22MnB5钢组织与性能的影响[J]. 金属热处理, 2022, 47(12): 1-6.
[6]	王高远, 王凯, 张枝梅. 2Cr13钢异形模锻件淬火裂纹分析及热处理工艺优化[J]. 金属热处理, 2022, 47(11): 45-53.
[7]	陈忠. 加热温度对Al-Si涂层热成形钢组织及性能的影响[J]. 金属热处理, 2022, 47(10): 228-233.
[8]	武斌, 伍金荣, 柴慧, 李永坤. 亚温淬火对NiCrMo-3堆焊层耐磨性能的影响[J]. 金属热处理, 2022, 47(1): 276-280.
[9]	黄娟, 黄元春, 申振宇, 李湘粤, 曾渝, 杨庚辰. 终轧温度及退火温度对5052铝合金板材组织及性能的影响[J]. 金属热处理, 2021, 46(9): 79-84.
[10]	张丙军, 谢章龙, 席连云, 李志超, 宁博. 亚温淬火对09MnNiDR容器钢板组织及断裂性能的影响[J]. 金属热处理, 2021, 46(4): 122-125.
[11]	陈义武, 吴鑫翔, 周利华, 付天佐, 赵静, 李胜. 高强不锈钢激光熔覆层的组织与性能[J]. 金属热处理, 2021, 46(10): 232-236.
[12]	李志宏, 丁浩, 朱世根. 电接触强化对Ni/Cu复合镀层组织与性能的影响[J]. 金属热处理, 2020, 45(8): 228-232.
[13]	闫磊, 李许明, 李凯峰, 马凤春. 回火工艺对1Cr12Ni3MoVN钢组织和性能的影响[J]. 金属热处理, 2020, 45(3): 196-199.
[14]	张雨源, 杨刚, 范俊明, 范国金. 热处理工艺对高压气瓶用34CrMo4钢屈强比的影响[J]. 金属热处理, 2020, 45(2): 125-128.
[15]	李云昆, 周芸, 时捷, 尉文超, 何肖飞, 胡芳忠, 王毛球. 亚温淬火-回火组织对18CrNiMo7-6齿轮钢疲劳性能的影响[J]. 金属热处理, 2020, 45(11): 19-25.

37Mn5钢厚壁石油套管表面裂纹成因分析与控制

Cause analysis and control of surface cracking of 37Mn5 steel thick-walled oil casing

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价