强烈淬火工艺制备超高强韧钢的应用展望

doi:10.13251/j.issn.0254-6051.2023.09.013

摘要/Abstract

摘要： 强烈淬火工艺具有能耗低、无污染及对材料的“超强化”作用等特点,近年来受到国外学者的广泛关注。介绍了强烈淬火工艺国内外发展的现况,亟待建立强烈淬火工艺参数数据库;由于强烈淬火工艺处理后的微观组织性能特点与特种装备用超高强韧钢的性能要求非常契合,提出了将强烈淬火工艺应用于超高强韧钢开发的展望。

关键词: 强烈淬火, 超高强韧钢, 组织, 性能

Abstract: Intensive quenching process has attracted extensive attention from foreign scholars in recent years due to its characteristics of low energy consumption, no pollution and “super strengthening” effect on materials. The development status of intensive quenching process at home and abroad was introduced and a database of intensive quenching process parameters urgent to establish. Because the microstructure and properties of the ultra high strength and toughness steel treated by the intensive quenching process fit well with the performance requirements of the ultra high strength and toughness steel used in special equipment, the prospect of applying the intensive quenching process to the development of ultra high strength and toughness steel is put forward.

Key words: intensive quenching, ultra high strength and toughness steel, microstructure, properties

中图分类号:

TG151

明章生, 赵杰, 栗克建, 曹鹏军, 朱斌, 冯毅. 强烈淬火工艺制备超高强韧钢的应用展望[J]. 金属热处理, 2023, 48(9): 81-87.

Ming Zhangsheng, Zhao Jie, Li Kejian, Cao Pengjun, Zhu Bin, Feng Yi. Application prospect of ultra high strength and toughness steel prepared by intensive quenching process[J]. Heat Treatment of Metals, 2023, 48(9): 81-87.

参考文献

[1]Totten G E, Albano L L M, 顾剑锋. 21世纪的热处理与表面工程—淬火技术的现状和未来发展[J]. 热处理, 2015, 30(2): 46-53.
Totten G E, Albano L L M, Gu J F. Heat treatment and surface engineering in the twenty-first century-quenching: Current status and future developments[J]. Heat Treatment, 2015, 30(2): 46-53.
[2]樊东黎. 强烈淬火——一种新的强化钢的热处理方法[J]. 热处理, 2005(4): 1-3.
Fan Dongli. Intensive quenching-An up-to-date heat treatment process for strengthening steels[J]. Heat Treatment, 2005(4): 1-3.
[3]杨登贵, 朱小硕, 傅宇东, 等. 40Cr钢的强烈淬火+回火处理[J]. 金属热处理, 2023, 48(2): 117-123.
Yang Denggui, Zhu Xiaoshuo, Fu Yudong. Intensive quenching and tempering treatment of 40Cr steel[J]. Heat Treatment of Metals, 2023, 48(2): 117-123.
[4]曲喆, 朱小硕, 邢若飞, 等. 一种双漩涡流场强烈淬火槽的设计及流热耦合仿真[J]. 金属热处理, 2021, 46(11): 262-269.
Qu Zhe, Zhu Xiaoshuo, Xing Ruofei, et al. Design and fluid-thermal coupling of a strong quenching tank with double vortex flow field[J]. Heat Treatment of Metals, 2021, 46(11): 262-269.
[5]樊东黎. 钢件渗碳、强烈淬火、表面强化成套技术的新思路[J]. 金属热处理, 2017, 42(1): 124-126.
Fan Dongli. New idea of carburizing, intensive quenching and surface strengthening complex technology for steel parts[J]. Heat Treatment of Metals, 2017, 42(1): 124-126.
[6]罗海文, 沈国慧. 超高强高韧化钢的研究进展和展望[J]. 金属学报, 2020, 56(4): 494-512.
Luo Haiwen, Sen Guohui. Progress and perspective of ultra-high strength steels having high toughness[J]. Acta Metallurgica Sinica, 2020, 56(4): 494-512.
[7]Rao K M P, Prabhu K N. Acomparative study on cooling performance of hot oil and molten salt quench media for industrial heat treatment[J]. Journal of Materials Engineering and Performance, 2020, 29: 3494-3501.
[8]马永杰. 热处理生产的环保与节能[J]. 热加工工艺, 2006(7): 64-66.
Ma Yongjie. Environmental protection and energy conservation in heat treatment production[J]. Hot Working Technology, 2006(7): 64-66.
[9]张清华. 低碳合金钢强烈淬火强韧化机理研究[D]. 哈尔滨: 哈尔滨工程大学, 2012.
Zhang Qinghua. The strength-toughening of a intensive quenched low carbon alloy steel[D]. Harbin: Harbin Engineering University, 2012.
[10]何祖娟. 20CrMnTi钢渗碳复合强烈淬火强韧化机理研究[D]. 哈尔滨: 哈尔滨工程大学, 2011.
He Zujuan. Study of mechanisms of strengthening and toughening of 20CrMnTi steel treated by cementation and complex intensive quenching[D]. Harbin: Harbin Engineering University, 2011.
[11]刘臣. 渗碳合金钢强烈淬火组织与性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2009.
Liu Chen. Research on microstructure and properties of carburized alloy steel treated by intensive quenching process[D]. Harbin: Harbin Engineering University, 2009.
[12]Lyublinski E, Vaks E Y, Kobasko N, et al. New Approach for Increasing Corrosion Resistance of Steel[C]//EUROCORR2011 Conference (Stockholm, Sweden, 2011).
[13]Kobasko N. Steels of optimal chemical composition combined with intensive quenching[J]. International Heat Treatment and Surface Engineering, 2012, 6(4): 153-159.
[14]Kobasko N. Improvement of IQ-3 processes to eliminate crack formation, decrease distortion, and maximize material strength, and ductility[J]. EUREKA Physics and Engineering, 2016(4): 3-10.
[15]樊东黎. 美国热处理技术发展路线图的启发[J]. 热处理, 2009, 24(5): 11-16.
Fan Dongli. Enlightenment from US heat treatment technology roadmap[J]. Heat Treatment, 2009, 24(5): 11-16.
[16]Aronov A, Kobasko N, Powell J, et al. Intensive quenching processes: Basic principles, applications, and commercialization[C]//European Conference on Heat Treatment and 21st IFHTSE Congress. Germany, Munich, 2014: 267-274.
[17]Kobasko N I, Aronov M A, Powell J A, et al. Improved production of automotive parts by intensive quench processing[J]. La Metallurgia Italiana, 2006(2): 13-22.
[18]Kobasko N. Intensive quenching of limited-hardenability steels saves energy and increases service life of products[C]//Proceedings of the 2nd IASME/WSEAS international conference on Energy and environment. 2007: 273-278.
[19]隋佳丽, 李新生, 肖桂勇, 等. 淬火介质表面换热系数的计算方法与应用[J]. 热加工工艺, 2023(14): 137-141.
Sui Jiali, Li Xinsheng, Xiao Guiyong, et al. Calculation method and application of surface heat transfer coefficient of quenching medium[J]. Hot Working Technology, 2023(14): 137-141.
[20]Maniruzzaman M, Sisson Jr R D. Heat transfer coefficients for quenching process simulation[C]//Journal de Physique IV (Proceedings). EDP Sciences, 2004, 120: 269-276.
[21]Osman A M, Beck J V. Investigation of transient heat transfer coefficients in quenching experiments[J]. Journal of Heat Transfer, 1990, 112(4): 853.
[22]Passarella D N, Aparicio A, Varas F, et al. Heat transfer coefficient determination of quenching process[J]. Mecánica Computacional, 2014, 33(32): 2009-2021.
[23]Kobasko N M. Intensequench process in slow agitated water salt and polymer solutions: Intense quench process[J]. European Journal of Applied Physics, 2021, 3(3): 6-12.
[24]Kobasko N. Investigation of batch intensive quenching processes when using hydrodynamic emitters in quench tanks[J]. EUREKA: Physics and Engineering, 2016(6): 29-36.
[25]任鑫, 窦春岳, 高志玉, 等. 热处理数值模拟技术的研究进展[J]. 材料导报, 2021, 35(19): 19186-19194.
Ren Xin, Dou Chunyue, Gao Zhiyu, et al. Research progress of numerical simulation in heat treatment[J]. Materials Review, 2021, 35(19): 19186-19194.
[26]Kobasko N I, Krukovskyi P, Yurchenko D. Initial and critical heat flux densities evaluated on the basis of CFD modeling and experiments during intensive quenching[C]//Proceedings of the 5th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment. 2007: 25-27.
[27]Rath J, Luebben T, Hoffmann F, et al. Generation of compressive residual stresses by high speed water quenching[J]. International Heat Treatment and Surface Engineering, 2010, 4(4): 156-159.
[28]Mustak O, Evcil E, Simsir C. Simulation of through-hardening of SAE 52100 steel bearings—Part I: Determination of material properties: Simulation der Durchhärtung vom Wälzlagerstahl SAE 52100-Teil I: Bestimmung der material eigenschaften[J]. Materialwissenschaft und Werkstofftechnik, 2016, 47(8): 735-745.
[29]Rath J, Luebben T, Hoffmann F, et al. Generation of compressive residual stresses by high speed water quenching[J]. International Heat Treatment and Surface Engineering, 2010, 4(4): 156-159.
[30]Ferguson B L, Freborg A M, Li Z. Residual stress and heat treatment-Process design for bending fatigue strength improvement of carburized aerospace gears[J]. HTM Journal of Heat Treatment and Materials, 2007, 62(6): 279-284.
[31]Wang X, Li T, Gao Y. What really governs the upper bound of uniform ductility in gradient or layered materials[J]. Extreme Mechanics Letters, 2021, 48: 101413.
[32]Wang Y, Yuan L, Zhang S, et al. The influence of combined gradient structure with residual stress on crack-growth behavior in medium carbon steel[J]. Engineering Fracture Mechanics, 2019, 209: 369-381.
[33]Wu X L, Jiang P, Chen L, et al. Synergetic strengthening by gradient structure[J]. Materials Research Letters, 2014, 2(4): 185-191.
[34]Yang M, Pan Y, Yuan F, et al. Back stress strengthening and strain hardening in gradient structure[J]. Materials Research Letters, 2016, 4(3): 145-151.
[35]Lu K. Making strong nanomaterials ductile with gradients[J]. Science, 2014, 345(6203): 1455-1456.
[36]Wu X L, Yang M X, Yuan F P, et al. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility[J]. Acta Materialia, 2016, 112: 337-346.
[37]Saha P A, Bhanja A. Applications of stainless steel in automobile industry[J]. Advanced Materials Research, 2013, 794: 731-740.
[38]Roodgari M R, Jamaati R, Aval H J. A new method to produce dual-phase steel[J]. Materials Science and Engineering A, 2021, 803: 140695.
[39]Gao B, Chen X, Pan Z, et al. A high-strength heterogeneous structural dual-phase steel[J]. Journal of Materials Science, 2019, 54(19): 12898-12910.
[40]Fei F, Sun S, Wei Z, et al. High ductile medium Mn lightweight alloy: The role of intensive quenching and deep cryogenic treatment[J]. Metals, 2023, 13(3): 499.
[41]Liang G, Tan Q, Liu Y, et al. Effect of cooling rate on microstructure and mechanical properties of a low-carbon low-alloy steel[J]. Journal of Materials Science, 2021, 56: 3995-4005.
[42]Bobylev S V, Ovid'Ko I A. Stress-driven migration of deformation-distorted grain boundaries in nanomaterials[J]. Acta Materialia, 2015, 88: 260-270.
[43]Chen S, Yu Q. The role of low angle grain boundary in deformation of titanium and its size effect[J]. Scripta Materialia, 2019, 163: 148-151.
[44]Lu L, Sui M L, Lu K. Superplastic extensibility of nanocrystalline copper at room temperature[J]. Science, 2000, 287(5457): 1463-1466.