TP347H不锈钢与BT700-l合金的应力腐蚀行为

doi:10.13251/j.issn.0254-6051.2024.08.001

金属热处理 ›› 2024, Vol. 49 ›› Issue (8): 1-8.DOI: 10.13251/j.issn.0254-6051.2024.08.001

• 材料研究 • 下一篇

TP347H不锈钢与BT700-l合金的应力腐蚀行为

李冬升, 刘仁才, 涂宇航, 兰轲钰

江苏大学材料科学与工程学院, 江苏镇江 212013

收稿日期:2024-02-13 修回日期:2024-06-20 出版日期:2024-08-25 发布日期:2024-09-27
作者简介:李冬升(1975—),男,正高级实验师,博士,主要研究方向为奥氏体不锈钢、耐热合金等,E-mail:13952883863@163.com
基金资助:
国家自然科学基金面上项目(51874146)

Stress corrosion behavior of TP347H stainless steel and BT700-l alloy

Li Dongsheng, Liu Rencai, Tu Yuhang, Lan Keyu

School of Materials Science and Engineering, Jiangsu University, Zhenjiang Jiangsu 212013, China

Received:2024-02-13 Revised:2024-06-20 Online:2024-08-25 Published:2024-09-27

摘要/Abstract

摘要： 利用慢应变速率拉伸(SSRT)应力腐蚀试验,对高盐腐蚀环境下TP347H不锈钢与BT700-l合金的应力腐蚀开裂(SCC)行为进行了研究。结果表明:在不同pH值高盐溶液中TP347H不锈钢与BT700-l合金均未发生SCC行为;仅在酸性腐蚀环境中由于Cl^-致敏和H⁺催化促进下致使TP347H不锈钢与BT700-l合金表现出一定的SCC倾向,断口呈现韧-脆混合开裂特征;在酸性腐蚀环境中,BT700-l合金的抗应力腐蚀性能明显高于TP347H不锈钢。

关键词: TP347H不锈钢, BT700-l合金, 慢应变速率拉伸, 应力腐蚀(SCC), 高盐溶液

Abstract: Stress corrosion cracking (SCC) behavior of TP347H stainless steel and BT700-l alloy in high concentration salt corrosion environment was studied by using slow strain rate tensile (SSRT) stress corrosion test. The results show that there is no SCC behavior between the TP347H stainless steel and BT700-l alloy in high concentration salt solution with different pH values. The TP347H stainless steel and BT700-l alloy show a certain SCC tendency under the condition of Cl^- sensitization and H⁺ catalysis in acidic corrosion environment, and the fractures are tough-brittle mixed cracking. The stress corrosion resistance of the BT700-l alloy in acid corrosion environment is significantly higher than that of the TP347H stainless steel.

Key words: TP347H stainless steel, BT700-l alloy, slow strain rate tensile (SSRT), stress corrosion cracking (SCC), high concentration salt solution

中图分类号:

TG132.3

李冬升, 刘仁才, 涂宇航, 兰轲钰. TP347H不锈钢与BT700-l合金的应力腐蚀行为[J]. 金属热处理, 2024, 49(8): 1-8.

Li Dongsheng, Liu Rencai, Tu Yuhang, Lan Keyu. Stress corrosion behavior of TP347H stainless steel and BT700-l alloy[J]. Heat Treatment of Metals, 2024, 49(8): 1-8.

参考文献

[1]张福林, 张肖飞, 卓小文, 等. 304H不锈钢在含Cl^-高温碱性溶液中的应力腐蚀研究[J]. 金属热处理, 2019, 44(S1): 599-603.
Zhang Fulin, Zhang Xiaofei, Zhuo Xiaowen, et al. Study on stress corrosion of 304H stainless steel in high temperature sodium hydroxide and Cl^- environment[J]. Heat Treatment of Metals, 2019, 44(S1): 599-603.
[2]张克乾, 唐占梅, 胡石林, 等. 核电用结构材料SCC裂纹扩展的研究现状[J]. 腐蚀与防护, 2019, 40(3): 157-163.
Zhang Keqian, Tang Zhanmei, Hu Shilin, et al. The research status of SCC crack propagation in structural materials of nuclear reactors[J]. Corrosion & Protection, 2019, 40(3): 157-163.
[3]张骏, 郑准备, 杨占君, 等. TP347H锅炉钢管失效机理研究进展[J]. 机械工程材料, 2021, 45(2): 7-14.
Zhang Jun, Zheng Zhunbei, Yang Zhanjun, et al. Research progress on failure mechanisms of TP347H boiler steel tube[J]. Materials for Mechanical Engineering, 2021, 45(2): 7-14.
[4]李冬升, 凌瀚宇, 王威, 等. IN740H镍基高温合金的应力腐蚀性能[J]. 材料热处理学报, 2023, 44(2): 85-92.
Li Dongsheng, Ling Hanyu, Wang Wei, et al. Stress corrosion properties of IN740H nickel-base superalloy[J]. Transactions of Materials and Heat Treatment, 2023, 44(2): 85-92.
[5]刘传森, 李壮壮, 陈长风. 不锈钢应力腐蚀开裂综述[J]. 表面技术, 2020, 49(3): 1-13.
Liu Chuansen, Li Zhuangzhuang, Chen Changfeng. Stress corrosion cracking of stainless steel[J]. Surface Technology, 2020, 49(3): 1-13.
[6]李冉, 侯利锋, 杜华云, 等. 敏化温度对445J2不锈钢应力腐蚀开裂的影响[J]. 材料热处理学报, 2022, 43(10): 100-108.
Li Ran, Hou Lifeng, Du Huayun, et al. Effect of sensitization temperature on stress corrosion cracking of 445J2 stainless steel[J]. Transactions of Materials and Heat Treatment, 2022, 43(10): 100-108.
[7]Serafim F M F, Alabi W O, Oguocha I N A, et al. Stress corrosion cracking behavior of selected stainless steels in saturated potash brine solution at different temperatures[J]. Corrosion Science, 2021, 178: 109025.
[8]柴万里, 贺庆强, 王凤序, 等. 沿海大气环境304不锈钢法兰连接双头螺柱腐蚀开裂失效分析[J]. 金属热处理, 2019, 44(11): 223-226.
Chai Wanli, He Qingqiang, Wang Fengxu, et al. Failure analysis of corrosion cracking of 304 stainless steel flange connection double-headed stud in coastal atmosphere[J]. Heat Treatment of Metals, 2019, 44(11): 223-226.
[9]常立涛. 压水堆主回路高温水中奥氏体不锈钢加工表面的腐蚀与应力腐蚀裂纹萌生: 研究进展及展望[J]. 金属学报, 2023, 59(2): 191-204.
Chang Litao. Corrosion and stress corrosion crack initiation in the machined surfaces of austenitic stainless steels in pressurized water reactor primary water: Research progress and perspective[J]. Acta Metallurgica Sinica, 2023, 59(2): 191-204.
[10]苏豪展, 王鹏, 张乐福. 工质压力及蠕变对冷变形310S不锈钢在超临界水环境下的应力腐蚀开裂行为影响研究[J]. 核动力工程, 2022, 43(6): 108-116.
Su Haozhan, Wang Peng, Zhang Lefu. Effect of working medium pressure and creep on the stress corrosion cracking behavior of cold deformed 310S stainless steel in supercritical water environment[J]. Nuclear Power Engineering, 2022, 43(6): 108-116.
[11]李亮, 艾志斌, 陈中官, 等. 316L不锈钢在氯离子和CH₃COOH介质环境中的应力腐蚀敏感性研究[J]. 材料保护, 2022, 55(9): 75-80.
Li Liang, Ai Zhibin, Chen Zhongguan, et al. Study on stress corrosion sensitivity of 316L stainless steel in medium environment containing Cl^- and CH₃COOH[J]. Materials Protection, 2022, 55(9): 75-80.
[12]魏磊, 彭剑, 裴峻峰, 等. 应变速率和环境介质对2205双相不锈钢应力腐蚀开裂行为的影响[J]. 腐蚀与防护, 2022, 43(9): 6-10.
Wei Lei, Peng Jian, Pei Junfeng, et al. Effect of strain rate and environment medium on stress corrosion cracking behavior of 2205 duplex stainless steel[J]. Corrosion & Protection, 2022, 43(9): 6-10.
[13]赵雪会, 戚建晶, 刘君林, 等. 含H₂S环境中马氏体不锈钢的应力腐蚀敏感性[J]. 腐蚀与防护, 2022, 43(1): 31-37.
Zhao Xuehui, Qi Jianjing, Liu Junlin, et al. Stress corrosion sensitivity of martensitic stainless steel in H₂S environment[J]. Corrosion & Protection, 2022, 43(1): 31-37.
[14]Akinwamide S O, Venter A, Akinribide O J, et al. Residual stress impact on corrosion behaviour of hot and cold worked 2205 duplex stainless steel: A study by X-ray diffraction analysis[J]. Engineering Failure Analysis, 2022, 131: 105913.
[15]Rajaguru J, Arunachalam N. Effect of machined surface integrity on the stress corrosion cracking behaviour of super duplex stainless steel[J]. Engineering Failure Analysis, 2021, 125: 105411.
[16]Dai H L, Shi S W, Guo C, et al. Stress corrosion cracking behavior of 316L SS in HF vapor environment based on corrosion degradation as a precursor[J]. Corrosion Science, 2022, 208: 52-66.
[17]陈国星, 周龙, 赵可昕, 等. TP347H不锈钢管表面裂纹的产生原因[J]. 机械工程材料, 2010, 34(3): 80-83.
Chen Guoxing, Zhou Long, Zhao Kexin, et al. Analysis of surface cracks on TP347H stainless steel tube[J]. Materials for Mechanical Engineering, 2010, 34(3): 80-83.
[18]孙永铎, 熊茹, 邱绍宇, 等. 国产690合金与321不锈钢异种金属焊缝的应力腐蚀行为研究[J]. 核动力工程, 2017, 38(4): 153-158.
Sun Yongduo, Xiong Ru, Qiu Shaoyu, et al. Study on stress corrosion cracking of welded joint with Inconel 690 and 321 stainless steel[J]. Nuclear Power Engineering, 2017, 38(4): 153-158.

TP347H不锈钢与BT700-l合金的应力腐蚀行为

Stress corrosion behavior of TP347H stainless steel and BT700-l alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	王海波, 徐震霖, 胡学文, 彭欢. 热轧超高强度复相钢的氢脆敏感性[J]. 金属热处理, 2021, 46(8): 51-55.
[2]	付航, 梁小凯, 孙新军, 黄涛. 新型纳米强化马奥复相钢的应力腐蚀行为[J]. 金属热处理, 2020, 45(12): 160-168.