滚珠丝杠感应淬火技术研究进展

doi:10.13251/j.issn.0254-6051.2025.02.027

摘要/Abstract

摘要： 感应淬火技术作为一种先进的金属表面热处理强化手段,可有效提升滚珠丝杠的硬度和耐磨性,从而显著延长其使用寿命和性能稳定性。综述了滚珠丝杠感应淬火技术所面临的关键技术问题和挑战,并系统概况了其主要研究进展,涵盖了基本原理、仿真模拟技术的运用、工艺参数的优化、专用设备等多个方面,在此基础上对感应淬火技术在丝杠制造业中的前景进行了展望。

关键词: 滚珠丝杠, 感应淬火, 研究进展

Abstract: Induction hardening technology, as an advanced metal surface heat treatment strengthening method, can effectively improve the hardness and wear resistance of ball screws, thereby significantly extending their service life and performance stability. The key technical issues and challenges faced by induction hardening technology for ball screws were summarized, and its main research progress, covering basic principles, application of simulation technology, optimization of process parameters, specialized equipment, and other aspects, were systematically over viewed. Based on these, the prospects of induction hardening technology in the screw manufacturing industry were discussed.

Key words: ball screw, induction hardening, research progress

中图分类号:

TG156.33

李明哲, 陈宝凤, 孙立壮, 张文良, 张伦, 刘俊杰. 滚珠丝杠感应淬火技术研究进展[J]. 金属热处理, 2025, 50(2): 172-180.

Li Mingzhe, Chen Baofeng, Sun Lizhuang, Zhang Wenliang, Zhang Lun, Liu Junjie. Research progress of induction hardening technology for ball screw[J]. Heat Treatment of Metals, 2025, 50(2): 172-180.

参考文献

[1] 刘俊, 龚梦辉, 周华西. 极限载荷下滚珠丝杠疲劳弹性寿命可靠性分析[J]. 组合机床与自动化加工技术, 2023(10): 150-154.
Liu Jun, Gong Menghui, Zhou Huaxi. Fatigue elastic life reliability analysis of ball screw under ultimate load [J]. Modular Machine Tool and Automatic Manufacturing Technique, 2023(10): 150-154.
[2] 林成, 王禹林, 欧屹, 等. 滚珠丝杠副外滚道研磨工艺参数优化试验研究[J]. 组合机床与自动化加工技术, 2019(2): 108-111.
Lin Cheng, Wang Yulin, Ou Yi, et al. Parameter optimization on the lapping of raceway tracks of ball screws by experiment research [J]. Modular Machine Tool and Automatic Manufacturing Technique, 2019(2): 108-111.
[3] 罗昊. 基于过象限的工业母机用滚珠丝杠副试验研究[D]. 南京: 南京理工大学, 2023.
[4] 冷洁. 我国机床行业发展现状与问题思考[J]. 锻压装备与制造技术, 2023, 58(3): 136-138.
Leng Jie. China's machine tool industry development status and problems thinking [J]. China Metalforming Equipment and Manufacturing Technology, 2023, 58(3): 136-138.
[5] 田文华, 孙超. 感应热处理站在行业新的起点上——2017年第三届高端感应热处理技术交流会报道[J]. 金属加工(热加工), 2018(1): 2-4.
[6] 朱会文. 上海感应热处理的发展和现状[J]. 金属加工(热加工), 2011(13): 11-13.
[7] 房紫璐, 龚直, 李玉玲, 等. 基于ANSYS的电磁感应加热系统仿真与实验[J]. 实验技术与管理, 2021, 38(5): 129-133.
Fang Zilu, Gong Zhi, Li Yuling, et al. Simulation and experiment of electromagnetic induction heating system based on ANSYS [J]. Experimental Technology and Management, 2021, 38(5): 129-133.
[8] 倪光正, 崔翔. 工程电磁场原理[M]. 北京: 高等教育出版社, 2006.
[9] 吴元徽. 滚珠丝杠表面感应淬火的质量控制[J]. 金属热处理, 2011, 36(1): 120-121.
Wu Yuanhui. Quality control of surface inductive quenching for ball screw [J]. Heat Treatment of Metals, 2011, 36(1): 120-121.
[10] Luo J, Shih A J. Inverse heat transfer solution of the heat flux due to induction heating [J]. Journal of Manufacturing Science and Engineering, 2005, 127(3): 555-563.
[11] 文怀宇. 风电齿轮感应加热过程温度演化及均匀性研究[D]. 秦皇岛: 燕山大学, 2021.
[12] 沈庆通. 感应加热进展50年[J]. 机械工人, 2006(7): 36-40.
[13] Li Z, Shivpuri R. Optimum design of the heat-transfer coefficient during gas quenching using the response surface method [J]. International Journal of Machine Tools & Manufacture: Design, Research and Application, 2002, 42(5): 549-558.
[14] Majorek A, Scholtes B, Muller H, et al. Influence of heat transfer on the development of residual stresses in quenched steel cylinders [J]. Steel Research, 1994, 65(4): 146-151.
[15] Todaka T, Enokizono M. Optimal design method with the boundary element for high-frequency quenching coil [J]. IEEE Transactions on Magnetics, 1996, 32(3): 1262-1265.
[16] Kayacan M C, Colak O. A fuzzy approach for induction hardening parameters selection [J]. Materials & design, 2004, 25(2): 155-161.
[17] Yang B J,Hattiangadi A, Li W Z, et al. Simulation of steel microstructure evolution during induction heating [J]. Materials Science and Engineering A, 2010, 527(12): 2978-2984.
[18] Zhang G Y, Xi X Q, Zhang W Y. Optimization of induction quenching process parameters and prediction of microstructure and hardness distribution for S45C steel shaft [J]. Transactions of Materials and Heat Treatment, 2013, 34(6): 174-179.
[19] Homberg D, Petzold T, Rocca E. Analysis and simulations of multifrequency induction hardening [J]. Nonlinear Analysis: Real World Applications, 2015, 22(1): 84-97.
[20] Pacheco P, Savi M A,Camarao A F. Analysis of residual stresses generated by progressive induction hardening of steel cylinders [J]. The Journal of Strain Analysis for Engineering Design, 2001, 36(5): 507-516.
[21] Wang K F, Chandrasekar S, Yang H T Y. Finite-element simulation of moving induction heat treatment [J]. Journal of Materials Engineering and Performance, 1995(4): 460-473.
[22] Melander M. Theoretical and experimental study of stationary and progressive induction hardening [J]. Journal of Heat Treating, 1985, 4(2): 145-166.
[23] Kranjc M,Zupanic A, Miklavcic D, et al. Numerical analysis and thermographic investigation of induction heating [J]. International Journal of Heat and Mass Transfer, 2010, 53(17/18): 3585-3591.
[24] Schwenk M, Hoffmeister J, Schulze V. Experimental determination of process parameters and material data for numerical modeling of induction hardening [J]. Journal of Materials Engineering and Performance, 2013, 22(7): 1861-1870.
[25] Palin-Luc T,Coupard D, Dumas C, et al. Simulation of multiaxial fatigue strength of steel component treated by surface induction hardening and comparison with experimental results [J]. International Journal of Fatigue, 2011, 33(8): 1040-1047.
[26] Verl A, Frey S. Correlation between feed velocity and preloading in ball screw drives [J]. CIRP Annals, 2010, 59(1): 429-432.
[27] Dutka V A,Maistrenko A L, Lukash V A, et al. Computer-aided and experimental study of hardness distribution in cutting tool steel body due to phase transformations during induction hardening [J]. Journal of Superhard Materials, 2012, 34(2): 131-140.
[28] Li H, He L, Gai K, et al. Numerical simulation and experimental investigation on the induction hardening of a ball screw [J]. Materials & Design, 2015(87): 863-876.
[29] 孙颖, 贺连芳, 李志超, 等. 滚珠丝杠仿形感应淬火工艺设计及数值模拟[J]. 材料热处理学报, 2022, 43(2): 161-169.
Sun Ying, He Lianfang, Li Zhichao, et al. Process design and numerical simulation of profiling induction hardening of ball screw [J]. Transactions of Materials and Heat Treatment, 2022, 43(2): 161-169.
[30] 崔洪芝, 李永凤, 孙金全, 等. GCr15钢滚珠丝杠感应淬火漏磁控制及耐磨性[J]. 材料热处理学报, 2013, 34(8): 129-135.
Cui Hongzhi, Li Yongfeng, Sun Jinquan, et al. Controlling of magnetic flux leakage and wear resistance of GCr15 steel ball screw by induction hardening [J]. Transactions of Materials and Heat Treatment, 2013, 34(8): 129-135.
[31] 汪友华, 吴建成, 刘成成, 等. 横向磁通连续感应加热过程中带材涡流场和温度场的仿真分析[J]. 金属热处理, 2019, 44(1): 229-234.
Wang Youhua, Wu Jiancheng, Liu Chengcheng, et al. Simulation and analysis of eddy current field and temperature field of strips during transverse flux continuous induction heating [J]. Heat Treatment of Metals, 2019, 44(1): 229-234.
[32] 王晓娜, 方旭, 唐波, 等. 脉冲式感应加热电源频率跟踪技术的研究与实现[J]. 电工技术学报, 2018, 33(18): 4357-4364.
Wang Xiaona, Fang Xu, Tang Bo, et al. Research and implementation of a frequency tracking technology for the pulsed induction heating power [J]. Transactions of China Electrotechnical Society, 2018, 33(18): 4357-4364.
[33] 丑幸荣, 周国华. 数控曲轴旋转感应淬火机床的控制系统[J]. 制造技术与机床, 1998(8): 16-18.
Chou Xingrong, Zhou Guohua. Control system of NC rotary inductance quenching machine for crankshaft [J]. Manufacturing Technology and Machine Tool, 1998(8): 16-18.