弹簧片单面中频淬火工艺及其感应器设计

doi:10.13251/j.issn.0254-6051.2020.03.048

金属热处理 ›› 2020, Vol. 45 ›› Issue (3): 240-241.DOI: 10.13251/j.issn.0254-6051.2020.03.048

弹簧片单面中频淬火工艺及其感应器设计

梁博^1,2, 姚洪瀚¹, 胡晓飞^1,2, 孙晓庭¹

1. 中车大连机车车辆有限公司, 辽宁大连 116022;
2. 大连交通大学材料科学与工程学院, 辽宁大连 116022

收稿日期:2019-09-16 出版日期:2020-03-25 发布日期:2020-04-03
作者简介:梁博(1988—),女,工程师,硕士,主要从事工艺质量管理工作,已发表论文14篇,E-mail:liangbo3_14@126.com。

Medium frequency unilateral induction quenching process of spring lamination and corresponding inductor design

Liang Bo^1,2, Yao Honghan¹, Hu Xiaofei^1,2, Sun Xiaoting¹

1. CRRC Dalian Co., Ltd., Dalian Liaoning 116022, China;
2. Department of Materials Science and Engineering, Dalian Jiaotong University, Dalian Liaoning 116022, China

Received:2019-09-16 Online:2020-03-25 Published:2020-04-03

摘要/Abstract

摘要：

为解决内燃机车运行过程中柴油机弹性联轴器的弹簧片与花键轴啮合使用时因硬度不均而断裂的问题,采用中频感应淬火工艺代替原激光表面淬火工艺,设计了新的中频淬火感应器,并制定了相应的单面感应淬火工艺,装车后运用效果良好。

关键词: 弹簧片, 中频感应淬火, 感应器

Abstract:

In order to solve uneven hardness resulted fracture problems of the elastic coupling spring laminations paired with the spline shaft on diesel engine during the running of diesel locomotive, a medium frequency induction hardening process was adopted to replace the original laser surface quenching process, and a new medium frequency quenching inductor with corresponding unilateral induction quenching scheme was designed. The results show a good effect after loading on the locomotives.

Key words: spring lamination, medium frequency induction quenching, inductor

中图分类号:

TG162.7

梁博, 姚洪瀚, 胡晓飞, 孙晓庭. 弹簧片单面中频淬火工艺及其感应器设计[J]. 金属热处理, 2020, 45(3): 240-241.

Liang Bo, Yao Honghan, Hu Xiaofei, Sun Xiaoting. Medium frequency unilateral induction quenching process of spring lamination and corresponding inductor design[J]. HTM, 2020, 45(3): 240-241.

[1]	霍金元, 陈国军, 郑德信. 等速驱动轴三柱槽壳内花键的感应淬火工艺[J]. 金属热处理, 2022, 47(4): 178-181.
[2]	许加柱1，史铜钢2，吴利仁3，郭欲平3，刘志谦3，周科1. 用ANSYS软件求证可调式轧辊感应器的工程可行性[J]. 金属热处理, 2015, 40(5): 168-172.
[3]	胡延平1，徐强1，唐华峰2，宋东奇3，骆汉丰1. 基于ANSYS的多点式中频感应淬火温度场有限元模拟[J]. 金属热处理, 2015, 40(4): 169-173.

弹簧片单面中频淬火工艺及其感应器设计

Medium frequency unilateral induction quenching process of spring lamination and corresponding inductor design

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价