热作模具钢热疲劳机理及性能改善的研究现状

doi:10.13251/j.issn.0254-6051.2020.09.002

摘要/Abstract

摘要： 热作模具钢的热疲劳性能是影响模具使用寿命的主要因素。对热作模具钢热疲劳性能的研究现状和评定方法进行了阐述,分析了组织演变、裂纹萌生和扩展对热疲劳性能的影响。同时对影响热疲劳性能的因素和改善热疲劳性能的方法进行了探讨和总结,并针对热作模具钢热疲劳研究的趋势进行了展望。

关键词: 热作模具钢, 热疲劳, 裂纹萌生, 裂纹扩展

Abstract: Thermal fatigue performance of hot work die steel is the main factor that affects the service life of dies.The research status and evaluation methods of thermal fatigue performance of hot work die steel were overviewed,the effects of structural evolution,crack initiation and propagation on thermal fatigue performance were analyzed.At the same time,the factors influencing the thermal fatigue performance and the methods to improve the thermal fatigue performance were discussed and summarized,and the trend of the thermal fatigue research of hot work die steel was prospected.

Key words: hot work die steel, thermal fatigue, crack initiation, crack propagation

中图分类号:

TG142.45

张旭, 何文超, 李东辉, 肖茂果, 李绍宏. 热作模具钢热疲劳机理及性能改善的研究现状[J]. 金属热处理, 2020, 45(9): 10-20.

Zhang Xu, He Wenchao, Li Donghui, Xiao Maoguo, Li Shaohong. Research status of thermal fatigue mechanisms and performance improvement of hot work die steel[J]. Heat Treatment of Metals, 2020, 45(9): 10-20.

参考文献

[1] 周小平,胡心彬,江锋.新型热作模具钢的热疲劳性能[J].金属热处理,2011,36(1):107-109.
Zhou Xiaoping,Hu Xinbin,Jiang Feng.Thermal fatigue property of a new type hot-work die steel[J].Heat Treatment of Metals,2011,36(1):107-109.
[2] 许书洋,左鹏鹏,吴晓春.硬度对H13热作模具钢热疲劳性能的影响[J].金属热处理,2016,41(8):18-23.
Xu Shuyang,Zuo Pengpeng,Wu Xiaochun.Effect of hardness on thermal fatigue of H13 hot work die steel[J].Heat Treatment of Metals,2016,41(8):18-23.
[3] 夏鹏成,陈蕴博,葛学元,等.热作模具钢热疲劳性能的研究现状与发展趋势[J].金属热处理,2008,33(12):1-6.
Xia Pengcheng,Chen Yunbo,Ge Xueyuan,et al.Research status and development trends of thermal fatigue property of hot die steels[J].Heat Treatmenti of Metals,2008,33(12):1-6.
[4] 何晋瑞.金属高温疲劳[M].北京:科学出版社,1988.
[5] 杨宜科.金属高温强度及试验[M].上海:上海科学技术出版社,1986.
[6] 王要利,宋克兴,张彦敏.热作模具钢热疲劳行为的研究现状[J].材料热处理学报,2018,39(4):1-13.
Wang Yaoli,Song Kexing,Zhang Yanmin.A review on thermal fatigue behavior of hot working die steel[J].Transactions of Materials and Heat Treatment,2018,39(4):1-13.
[7] Manson S S.Fatigue:A complex subject—Some simple approximations[J].Experimental Mechanics,1965,5(4):193-226.
[8] Monig R,Keller R R,Volkert C A.Thermal fatigue testing of thin metal films[J].Review of Scientific Instruments,2004,75(11):4997-5004.
[9] Srivastava A,Joshi V,Shivpuri R.Computer modeling and prediction of thermal fatigue cracking in die-casting tooling[J].Wear,2004,256(1/2):38-43.
[10] Spera D A.What is Thermal Fatigue?[M].ASTM International,1976.
[11] Persson A,Hogmark S,Bergström J.Thermal fatigue cracking of surface engineered hot work tool steels[J].Surface and Coatings Technology,2005,191(2/3):216-227.
[12] Kamaya M,Taheri S.A study on the evolution of crack networks under thermal fatigue loading[J].Nuclear Engineering and Design,2008,238(9):2147-2154.
[13] Sehitoglu H.Thermomechanical Fatigue Behavior of Materials[M].ASTM International,1993.
[14] Starling C M D,Branco J R T.Thermal fatigue of hot work tool steel with hard coatings[J].Thin Solid Films,1997,308:436-442.
[15] Kundalkar D,Mavalankar M,Tewari A.Effect of gas nitriding on the thermal fatigue behavior of martensitic chromium hot-work tool steel[J].Materials Science and Engineering A,2016,651:391-398.
[16] 许珞萍,吴晓春,邵光杰,等.4Cr5MoSiV1,8407 钢的热疲劳性能[J].材料工程,2001(2):3-7.
Xu Luoping,Wu Xiaochun,Shao Guangjie,et al.Effect of the tempering temperature on thermal fatigue behavior of 4Cr5MoSiV1 and 8407 steels[J].Journal of Materials Engineering,2001(2):3-7.
[17] 彭文屹,吴晓春,闵永安,等.H13钢渗硼层热疲劳性能的研究[J].金属热处理,2007,32(12):67-70.
Peng Wenyi,Wu Xiaochun,Min Yong'an,et al.Study on thermal fatigue behavior of boriding layer of H13 steel[J].Heat Treatment of Metals,2007,32(12):67-70.
[18] Zeng Y,Zuo P P,Wu X C,et al.Effects of mechanical strain amplitude on the isothermal fatigue behavior of H13[J].International Journal of Minerals,Metallurgy,and Materials,2017,24(9):1004-1009.
[19] 张学友,左鹏鹏,何西娟,等.氮含量对热作模具钢 4Cr5Mo2V 热疲劳性能的影响[J].金属热处理,2017,42(1):9-14.
Zhang Xueyou,Zuo Pengpeng,He Xijuan,et al.Effect of nitrogen content on thermal fatigue property of hot work die steel 4Cr5Mo2V[J].Heat Treatment of Metals,2017,42(1):9-14.
[20] 徐晓,吴晓春,邵光杰,等.8407 钢与 4Cr5MoSiV1 钢纵横向热疲劳性能研究[J].上海大学学报:自然科学版,2001,7(3):261-266.
Xu Xiao,Wu Xiaochun,Shao Guangjie,et al.Thermal fatigue behavior in transversal and longitudinal directions in 8407 steel and 4Cr5MoSiV1 steel[J].Journal of Shanghai University:Natural Science Edition,2001,7(3):261-266.
[21] 吴晓春,许珞萍.模具钢热疲劳裂纹的计算机辅助评定[J].上海金属,2001,23(6):1-5.
Wu Xiaochun,Xu Luoping.Computer-alded evaluation for hot fatigue crack of model steel[J].Shanghai Metals,2001,23(6):1-5.
[22] 朱景鹏,姚德良,李其娟.几种定向凝固高温合金热疲劳性能的研究[J].材料工程,1980(4):21-27.
[23] Lu Y,Ripplinger K,Huang X,et al.A new fatigue life model for thermally-induced cracking in H13 steel dies for die casting[J].Journal of Materials Processing Technology,2019,271:444-454.
[24] Wen J B,Zhou C Y,Li X,et al.Effect of temperature range on thermal-mechanical fatigue properties of P92 steel and fatigue life prediction with a new cyclic softening model[J].International Journal of Fatigue,2019,129:105-226.
[25] 胡心彬,李麟.H13钢热疲劳后碳化物形态和组分的变化[J].材料热处理学报,2007,28(6):84-89.
Hu Xinbin,Li Lin.Changes of morphology and composition of carbides in H13 steel after thermal fatigue[J].Transactions of Materials and Heat Treatment,2007,28(6):84-89.
[26] Hu X B,Li L,Wu X C,et al.Coarsening behavior of M₂₃C₆ carbides after ageing or thermal fatigue in AISI H13 steel with niobium[J].International Journal of Fatigue,2006,28(3):175-182.
[27] 胡心彬,李麟,吴晓春.4Cr5MoSiV1 热作模具钢热疲劳中碳化物粗化动力学分析[J].材料热处理学报,2005,26(1):57-61.
Hu Xinbin,Li Lin,Wu Xiaochun.Coarsening kinetics of carbides in 4Cr5MoSiV1 hot work tool steel during thermal fatigue[J].Transactions of Materials and Heat Treatment,2005,26(1):57-61.
[28] 李熙章,施占华,陈深榕,等.析出硬化型热作模具钢在热疲劳中的组织变化[J].钢铁,1991(12):36-39.
Li Xizhang,Shi Zhanhua,Chen Shenrong,et al.Microstructure change of recipitation hardened hot die sheel 2Cr3Mo2NiVSi during thermal fatiguing[J].Iron and Steel,1991(12):36-39.
[29] Johnny Sjöström,Jens Bergström.Thermal fatigue testing of chromium martensitic hot-work tool steel after different austenitizing treatments[J].Journal of Materials Processing Technology,2004,153-154(1):1089-1096.
[30] Jia Z X,Liu Y W,Li J Q,et al.Crack growth behavior at thermal fatigue of H13 tool steel processed by laser surface melting[J].International Journal of Fatigue,2015,78:61-71.
[31] 于辉,杜凤山,李亮.热疲劳裂纹扩展的数值模拟[J].重型机械,2004(5):50-52.
Yu Hui,Du Fengshan,Li Liang.Numerical simulation on the crack propagation of thermal fatigue[J].Heavy Machinery,2004(5):50-52.
[32] 佟倩,吴晓春,周青春,等.热作模具钢 SDH3 热疲劳机理[J].材料热处理学报,2010,31(5):81-86.
Tong Qian,Wu Xiaochun,Zhou Qingchun,et al.Thermal fatigue mechanism of SDH3 hot work steel[J].Transactions of Materials and Heat Treatment,2010,31(5):81-86.
[33] 李明.热作模具钢热疲劳裂纹的力学基础[J].机械工程材料,1993(6):29-30.
Li Ming.Mechnical fundament of thermal fatigue cracks on hot work die steel[J].Materials for Mechanical Engineering,1993(6):29-30.
[34] Zhang J L,Zhao Z H,Kong Y H,et al.Crack initiation and propagation mechanisms during thermal fatigue in directionally solidified superalloy DZ125[J].International Journal of Fatigue,2019,119:355-366.
[35] Klobčar D,Kosec L,Kosec B,et al.Thermo fatigue cracking of die casting dies[J].Engineering Failure Analysis,2012,20:43-53.
[36] Klobčar D,Tuček J,Taljat B.Thermal fatigue of materials for die-casting tooling[J].Materials Science and Engineering A,2008,472(1/2):198-207.
[37] Wang Y J,Charbal A,Hild F,et al.Crack initiation and propagation under thermal fatigue of austenitic stainless steel[J].International Journal of Fatigue,2019,124:149-166.
[38] 梁思祖,梁耀能,李茅坪.H13钢铝合金压铸模开裂原因分析[J].金属热处理,2002,27(12):48-50.
Liang Sizu,Liang Yaoneng,Li Maoping.Failure analysis on aluminum alloy casting die made of H13 steel[J].Heat Treatment of Metals,2002,27(12):48-50.
[39] 李学峰.疲劳裂纹闭合效应数值模拟方法研究[D].西安:西北工业大学,2005.
[40] 闫明,孙志礼,杨强,等.热疲劳裂纹开裂过程的有限元模拟[J].东北大学学报(自然科学版),2007,28(12):1741-1744.
Yan Ming,Sun Zhili,Yang Qiang,et al.FEM simulation of initial cracking process due to thermal fatigue[J].Journal of Northeastern University(Natural Science),2007,28(12):1741-1744.
[41] Persson A,Hogmark S,Bergström J.Simulation and evaluation of thermal fatigue cracking of hot work tool steels[J].International Journal of Fatigue,2004,26(10):1095-1107.
[42] 李国成,王保兴,王为良,等.2.25Cr-1Mo 钢热疲劳裂纹扩展特性数值模拟分析[J].热加工工艺,2010,39(20):44-47.
Li Guocheng,Wang Baoxing,Wang Weiliang,et al.Numerical simulation analysis on thermal fatigue crack growth characteristics of 2.25Cr-1Mo steel[J].Hot Working Technology,2010,39(20):44-47.
[43] 樊俊铃,郭杏林.弹塑性疲劳裂纹扩展行为的数值模拟[J].机械工程学报,2015,51(10):33-40.
Fan Junling,Guo Xinglin.Numerical simulation on elastic-plastic fatigue crack growth behavior[J].Journal of Mechanical Engineering,2015,51(10):33-40.
[44] 吴晓春,许珞萍.Uddeholm 热疲劳图谱的分析与定量评定[J].理化检验:物理分册,2002,38(1):14-17.
Wu Xiaochun,Xu Luoping.Quantitative analysis and evaluation of the uddeholm heat-checking scale[J].Physical Testing and Chemical Analysis,Part A Physical Testing,2002,38(1):14-17.
[45] 李熙章,施占华,汤继跃,等.评定模具钢热疲劳性能的 Uddeholm法[J].安徽工学院学报,1988,7(2):13-17.
[46] 徐晓,吴晓春,许珞萍.热作模具钢热疲劳损伤因子的研究[J].上海金属,2003,25(2):4-8.
Xu Xiao,Wu Xiaochun,Xu Luoping.Study on damage parameter for thermal fatigue of hot work model steel[J].Shanghai Metals,2003,25(2):4-8.
[47] 谢豪杰,吴晓春.热作模具钢热疲劳损伤程度的计算机评定[J].上海金属,2008,30(3):55-58.
Xie Haojie,Wu Xiaochun.Computer evaluation for the degree of thermal fatigue damage of hot working die steel[J].Shanghai Metals,2008,30(3):55-58.
[48] Qi Y F,Wang B,Li S D,et al.Improved quantitative analysis method for evaluating fatigue cracks in thermal fatigue testing[J].Materials Letters,2019,242:115-118.
[49] Wen J B,Zhou C Y,Li X,et al.Effect of temperature range on thermal-mechanical fatigue properties of P92 steel and fatigue life prediction with a new cyclic softening model[J].International Journal of Fatigue,2019,129:105-226.
[50] Fournier B,Sauzay M,Caes C,et al.Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel.Part III:Lifetime prediction[J].International Journal of Fatigue,2008,30(10):1797-1812.
[51] Fournier B,Sauzay M,Caës C,et al.Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel.Part I:Effect of tensile holding period on fatigue lifetime[J].International Journal of Fatigue,2008,30(4):649-662.
[52] Wang Y J,Charbal A,Hild F,et al.Crack initiation and propagation under thermal fatigue of austenitic stainless steel[J].International Journal of Fatigue,2019,124:149-166.
[53] Wu Y,Liu Y,Chen H,et al.Microstructure evolution and crack propagation feature in thermal fatigue of laser-deposited Stellite 6 coating for brake discs[J].Surface and Coatings Technology,2019,358:98-107.
[54] 李熙章,施占华.显微组织对模具钢热疲劳性能的影响[J].机械工程材料,1993(1):40-42.
Li Xizhang,Shi Zhanhua.The influence of microscopic structure on thermal-fatigue behaviour of hot-work tool steels[J].Materials for Mechanical Engineering,1993(1):40-42.
[55] 胡正前,张文华.稀土对复合处理渗层热疲劳性能的影响[J].金属热处理,1997,22(6):18-20.
Hu Zhengqian,Zhang Wenhua.Effect of rare earth elements on thermal fatigue behavior of composite treated layer[J].Heat Treatment of Metals,1997,22(6):18-20.
[56] Wu X,Xu L.Computer aided evaluation of thermal fatigue cracks on hot-work tool steel[C] //6th Internation Tooling Conference.2002:781-792.
[57] Tsujii N,Abe G,Fukaura K,et al.Effect of testing atmosphere on low cycle fatigue of hot work tool steel at elevated temperature[J].Tetsu-to-Hagane,1995,81(6):661-666.
[58] Saunders N,Guo U K Z,Li X,et al.Using JMatPro to model materials properties and behavior[J].Jom,2003,55(12):60-65.
[59] 王亮亮,李晶,李勇勇,等.Mg对热作模具钢H13组织和力学性能的影响[J].特殊钢,2013(5):68-70.
Wang Liangliang,Li Jing,Li Yongyong,et al.Effect of Mg on structure and mechanical properties of hot-working-die steel H13[J].Special Steel,2013(5):68-70.
[60] 梁洪达,崔昆,何向山,等.Mn对热作模具钢4Cr3Mo2NiVNb热疲劳性能的影响[J].材料热处理学报,1994,15(4):22-25.
[61] 梁洪达,何向山.合金元素对热作模具钢4Cr3Mo2NiVNb(HD)热疲劳性能的影响[J].机械工程材料,1994(5):31-32.
Liang Hongda,He Xiangshan.Influence of alloying elements on fatigue behaviour of hot working die steel 4Cr3Mo2NiVNb(HD)[J].Materials for Mechanical Engineering,1994(5):31-32.
[62] Pei H Q,Wen Z X,Wang Z H,et al.Transient thermal fatigue crack propagation behavior of a nickel-based single-crystal superalloy[J].International Journal of Fatigue,2019,131:105-303.
[63] 胡心彬,李麟,吴晓春.含铌 H13 钢的热疲劳软化性能[C] //中国特殊钢年会论文集.2005:41-44.
[64] 沈利群.改善H13热作模具钢性能的措施[J].模具技术,1996(2):71-75.
[65] 赵晋龙.提高H13钢热作模具寿命方法综述[J].热处理,2002,17(2):7-10.
Zhao Jinlong.Summary of the extension of service life of H13 hot work die steel[J].Heat Treatment,2002,17(2):7-10.
[66] 边泊乾,刘金海,李国禄,等.等温淬火温度对ADI中残余奥氏体及其力学性能的影响[J].热加工工艺,2007,36(8):58-61.
Bian Boqian,Liu Jinhai,Li Guolu,et al.Effects of isothermal quenching temperature on retained austenite and mechanical properties of ADI[J].Hot Working Technology,2007,36(8):58-61.
[67] Qi Y F,Tang Y H,Wang B,et al.Characteristics of tungsten coatings deposited by molten salt electro-deposition and thermal fatigue properties of electrodeposited tungsten coatings[J].International Journal of Refractory Metals and Hard Materials,2019,81:183-188.
[68] 陈妍.稀土元素Gd和Sc对H13模具钢热疲劳性能的影响[J].铸造技术,2014(9):1945-1947.
Chen Yan.Effect of rare earth element Gd and Sc on thermal fatigue proformance of die steel H13[J].Foundry Technology,2014(9):1945-1947.
[69] 张伟,石淑琴,陈云祥,等.激光熔覆Ni-Cr-B-Si耐热疲劳合金的组织与性能[J].金属热处理,2012,37(5):103-106.
Zhang Wei,Shi Shuqin,Chen Yunxiang,et al.Microstructure and properties of Ni-Cr-B-Si anti-thermal fatigue alloy prepared by laser cladding[J].Heat Treatment of Metals,2012,37(5):103-106.
[70] 叶宏,雷临苹,喻文新,等.H13钢激光熔覆Co基涂层组织及热疲劳性能[J].强激光与粒子束,2017(2):140-144.
Ye Hong,Lei Linping,Yu Wenxin,et al.Microstructure and thermal fatigue resistance of Co-based alloy coating on H13 steel by laser cladding[J].High Power Laser and Particle Beams,2017(2):140-144.
[71] Tong X,Dai M J,Zhang Z H.Thermal fatigue resistance of H13 steel treated by selective laser surface melting and CrNi alloying[J].Applied Surface Science,2013,271:373-380.
[72] Cong D L,Zhou H,Ren Z N,et al.Thermal fatigue resistance of hot work die steel repaired by partial laser surface remelting and alloying process[J].Optics and Lasers in Engineering,2014,54:55-61.
[73] Liu B,Wang B,Yang X D,et al.Thermal fatigue evaluation of AISI H13 steels surface modified by gas nitriding with pre-and post-shot peening[J].Applied Surface Science,2019,483:45-51.
[74] 揭晓华,董小虹,黄拿灿,等.H13钢碳、氮、氧、硫、硼五元共渗层的性能研究[J].金属热处理,2002,27(7):21-23.
Jie Xiaohua,Dong Xiaohong,Huang Nacan,et al.The properties of H13 steel treated by C-N-O-S-B multi-elements penetrating[J].Heat Treatment of Metals,2002,27(7):21-23.
[75] 曹光明.H13钢模具的表面强化技术[J].模具技术,2004(4):59-62.
Cao Guangming.Surface strengthening technology applied to H13 steel dies[J].Die and Mould Technology,2004(4):59-62.
[76] 褚作明,佟晓辉.H13钢低温化学热处理渗层热疲劳特性研究[J].金属热处理,1993,18(3):33-39.
Zhu Zhuoming,Tong Xiaohui.Study on the thermal fatigue properties of diffusion layer on steel H13 treated with low temperature thermochemical treatment[J].Heat Treatment of Metals,1993,18(3):33-39.
[77] 归静芝,闵永安,杨浩鹏,等.H13钢低温等离子渗氮层的热疲劳性能[J].金属热处理,2012,37(4):43-47.
Gui Jingzhi,Min Yong'an,Yang Haopeng,et al.Thermal fatigue property of H13 steel after plasma nitriding at low temperature[J].Heat Treatment of Metals,2012,37(4):43-47.
[78] 彭文屹,吴晓春,闵永安,等.氩气氛离子渗氮提高H13钢热疲劳性能[J].模具工业,2008(1):69-74.
Peng Wenyi,Wu Xiaochun,Min Yong'an,et al.Application of argon atmosphere ion nitriding in improving the thermal fatigue behavior of steel H13[J].Die and Mould Industry,2008(1):69-74.
[79] 彭文屹,吴晓春,闵永安,等.离子渗氮化合物层对 H13 钢热疲劳性能的影响[J].金属热处理,2002,27(5):22-24.
Peng Wenyi,Wu Xiaochun,Min Yong'an,et al.Effect of plasma nitrided compound layer on thermal fatigue behavior of H13 steel[J].Heat Treatment of Metals,2002,27(5):22-24.
[80] Min Y A,Wu X C,Xu L P,et al.Influence of different surface treatments of H13 hot work die steel on its thermal fatigue behaviors[J].Journal of Shanghai University,2001,5(4):326-330.