钛合金表面激光改性技术研究进展

doi:10.13251/j.issn.0254-6051.2022.03.040

摘要/Abstract

摘要： 随着钛合金应用范围的不断扩大,对于钛合金的性能也有了更高的要求,因此钛合金的表面改性成为重要的研究热点,综述了激光合金化技术和激光熔覆技术在钛合金表面改性中的应用,并对其存在的问题以及发展趋势进行了分析总结。

Abstract: With the continuous expansion of application scope of titanium alloy, there are higher requirements for the performance of titanium alloy, so the surface modification of titanium alloy has become an important research hotspot. The application of laser alloying technology and laser cladding technology in the surface modification of titanium alloy is summarized, and the existing problems and developing trend are analyzed and summarized.

Key words: laser cladding, titanium alloy, laser alloying, wear resistance

中图分类号:

TG174.4

林基辉, 温亚辉, 范文博, 张腾, 刘晨雨, 薛元琳. 钛合金表面激光改性技术研究进展[J]. 金属热处理, 2022, 47(3): 215-221.

Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin. Research progress of laser modification technology for titanium alloy surface[J]. Heat Treatment of Metals, 2022, 47(3): 215-221.

参考文献

[1]董涛. 钛合金表面激光熔覆Ti-Al-Si涂层的结构特征及其高温抗氧化性能[D]. 昆明: 昆明理工大学, 2017.
Dong Tao. Structural characteristics and high temperature oxidation resistance of laser cladding Ti-Al-Si coating on titanium alloy[D]. Kunming: Kunming University of Science and Technology, 2017.
[2]李俊峰, 魏正英, 卢秉恒. 钛及钛合金激光选区熔化技术的研究进展[J]. 激光与光电子学进展, 2018, 55(1): 29-46.
Li Junfeng, Wei Zhengying, Lu Bingheng. Progress in selective laser melting of titanium and titanium alloys[J]. Progress in Laser and Optoelectronics, 2018, 55(1): 29-46.
[3]于凤梅, 杨薛军, 张科伟, 等. 表面处理技术在航天材料中的应用[J]. 理化检验(物理分册), 2018, 54(6): 411-417.
Yu Fengmei, Yang Xuejun, Zhang Kewei, et al. Application of surface treatment technology in aerospace materials[J]. Physical and Chemical Examination (Physics Volume), 2018, 54(6): 411-417.
[4]林基辉, 刘德鑫, 李耀, 等. 激光合金化技术在表面改性中的应用研究进展[J]. 热加工工艺, 2020, 49(8): 13-16.
Lin Jihui, Liu Dexin, Li Yao, et al. Research progress of laser alloying technology in surface modification[J]. Hot Working Technology, 2020, 49(8): 13-16.
[5]张青来, 彭新成, 韩伟东, 等. TA1钛薄板激光冲击成形实验及数值模拟[J]. 中国有色金属学报, 2019, 29(2): 350-360.
Zhang Qinglai, Peng Xincheng, Han Weidong, et al. Laser shock forming experiment and numerical simulation of TA1 titanium sheet[J]. Chinese Journal of Nonferrous Metals, 2019, 29(2): 350-360.
[6]林基辉, 李耀, 刘德鑫, 等. 注塑机螺杆表面激光Cr-Mo-B合金化层制备及工艺研究[J]. 兵器材料科学与工程, 2019, 42(4): 109-113.
Lin Jihui, Li Yao, Liu Dexin, et al. Preparation and technology of laser Cr-Mo-B alloying layer on screw surface of injection molding machine[J]. Ordnance Materials Science and Engineering, 2019, 42 (4): 109-113.
[7]郭华锋, 孙涛, 李菊丽, 等. 激光表面改性提高钛合金耐磨性能的研究进展[J]. 热加工工艺, 2012, 41(18): 124-129.
Guo Huafeng, Sun Tao, Li Juli, et al. Research progress of improving wear resistance of titanium alloy by laser surface modification[J]. Hot Working Technology, 2012, 41(18): 124-129.
[8]田永生. 钛合金表面激光硼碳氮合金化层的组织结构与耐磨性能研究[D]. 济南: 山东大学, 2006.
Tian Yongsheng. Microstructure and wear resistance of laser boron carbon nitrogen alloying layer on titanium alloy[D]. Ji'nan: Shandong University, 2006.
[9]宿冠群. 钛合金表面原位制备TiN/Ti₃Al复合涂层及性能研究[D]. 上海: 华东理工大学, 2017.
Su Guanqun. In situ preparation and properties of TiN/Ti₃Al composite coating on titanium alloy[D]. Shanghai: East China University of Science and Technology, 2017.
[10]Bonss S, Brenner B, Beyer E, et al. Laser gas alloying of titanium-new possibilities for severe wear loaded components in medicine[J]. Material Wissenschaft and Werkstofftechnik, 2001, 32(2): 160-165.
[11]狄玉丽. 钛及钛合金的性质及表面处理技术探讨[J]. 科技创新与应用, 2014, 10(23): 18-19.
Di Yuli. Properties and surface treatment technology of titanium and titanium alloys[J]. Technological Innovation and Application, 2014, 10(23): 18-19.
[12]戈晓岚, 仲奕颖, 许晓静, 等. TC4钛合金表面激光合金化Ti-Al-Nb涂层的研究[J]. 稀有金属材料与工程, 2017, 14(8): 2266-2270.
Ge Xiaolan, Zhong Yiying, Xu Xiaojing, et al. Study on laser alloying Ti-Al-Nb coating on TC4 titanium alloy[J]. Rare Metal Materials and Engineering, 2017, 14(8): 2266-2270.
[13]王培, 李争显, 黄春良, 等. 激光表面改性技术在钛合金上的应用研究[J]. 激光杂志, 2014, 35(2): 4-6.
Wang Pei, Li Zhengxian, Huang Chunliang, et al. Application of laser surface modification technology on titanium alloy[J]. Laser Journal, 2014, 35(2): 4-6.
[14]Yue T M, Yu J K, Mei Z, et al. Excimer laser surface treatment of Ti-6Al-4V alloy for corrosion resistance enhancement[J]. Materials Letters, 2002, 52(3): 206-212.
[15]刘丹, 陈志勇, 陈科培, 等. TC4钛合金表面激光熔覆复合涂层的组织和耐磨性[J]. 金属热处理, 2015, 12(3): 58-62.
Liu Dan, Chen Zhiyong, Chen Kepei, et al. Microstructure and wear resistance of laser cladding composite coating on TC4 titanium alloy[J]. Heat Treatment of Metals, 2015, 12(3): 58-62.
[16]刘庆辉, 许晓静, 戈晓岚, 等. TC4钛合金表面激光合金化Ti-Si-C涂层的研究[J]. 稀有金属, 2016, 10(6): 546-551.
Liu Qinghui, Xu Xiaojing, Ge Xiaolan, et al. Study on laser alloying Ti-Si-C coating on TC4 titanium alloy[J]. Rare Metals, 2016, 10 (6): 546-551.
[17]Tian Y S, Chen C Z, Chen L B, et al. Study on the microstructure and wear resistance of the composite coatings fabricated on Ti-6Al-4V under different processing conditions[J]. Applied Surface Science, 2006, 253(3): 1494-1499.
[18]张年龙, 王波, 张红霞, 等. 钛合金表面自润滑陶瓷涂层的组织及耐磨性能研究[J]. 表面技术, 2018, 47(12): 173-180.
Zhang Nianlong, Wang Bo, Zhang Hongxia, et al. Microstructure and wear resistance of self lubricating ceramic coating on titanium alloy[J]. Surface Technology, 2018, 47(12): 173-180.
[19]蒋平, 张继娟, 于利根, 等. Ti-6Al-4V合金激光表面合金化制备Ti₅Si₃/Ti耐磨复合材料涂层研究[J]. 稀有金属材料与工程, 2000, 10(4): 269-272.
Jiang Ping, Zhang Jijuan, Yu Ligen, et al. Laser surface alloying of Ti-6Al-4V alloy and preparation of Ti₅Si₃/Ti wear resistant composite coating[J]. Rare Metal Materials and Engineering, 2000, 10(4): 269-272.
[20]戴景杰, 张丰云, 王阿敏, 等. Nb掺杂对Ti-Al合金化层抗高温氧化性能的影响[J]. 材料工程, 2017, 45(2): 24-31.
Dai Jingjie, Zhang Fengyun, Wang Amin, et al. Effect of Nb doping on high temperature oxidation resistance of Ti-Al alloyed layer[J]. Materials Engineering, 2017, 45(2): 24-31.
[21]黄开金, 黄晚霞, 林鑫, 等. TA2钛表面激光合金化制备耐1000 ℃高温氧Ti₅Si₃/Ti₃Al复合涂层[J]. 航空制造技术, 2018, 61(23): 46-51.
Huang Kaijin, Huang Wanxia, Lin Xin, et al. Preparation of high temperature oxygen resistant Ti₅Si₃/Ti₃Al composite coating on TA2 titanium surface by laser alloying[J]. Aviation Manufacturing Technology, 2018, 61(23): 46-51.
[22]张蕾涛, 刘德鑫, 张伟樯, 等. 钛合金表面激光熔覆涂层的研究进展[J]. 表面技术, 2020, 49(8): 97-104.
Zhang Leitao, Liu Dexin, Zhang Weiqiang, et al. Research progress of laser cladding coating on titanium alloy[J]. Surface Technology, 2020, 49(8): 97-104.
[23]Zhang Q, Zhang P L, Li M H, et al. Microstructure, wear resistance and oxidation behavior of Ni-Ti-Si coatings fabricated on Ti6Al4V by laser cladding[J]. Materials, 2017, 10(11): 1248-1250.
[24]易云杰, 楼程华, 郭士锐, 等. 激光表面合金化制备镍钛涂层的组织与性能[J]. 应用激光, 2013, 33(2): 99-103.
Yi Yunjie, Lou Chenghua, Guo Shirui, et al. Microstructure and properties of Ni-Ti coating prepared by laser surface alloying[J]. Applied Laser, 2013, 33(2): 99-103.
[25]Huang C, Zhang Y, Shen J, et al. Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V alloy[J]. Surface and Coatings Technology, 2011, 206(6): 1389-1395.
[26]Lv Y H, Li J, Tao Y F, et al. Oxidation behaviors of the TiNi/Ti₂Ni matrix composite coatings with different contents of TaC addition fabricated on Ti-6Al-4V by laser cladding[J]. Journal of Alloys and Compounds, 2016, 679(10): 202-212.
[27]刘秀波, 王华明. TiAl合金激光熔覆金属硅化物复合材料涂层耐磨性和高温氧化性能研究[J]. 中国激光, 2005, 12(8): 1143-1149.
Liu Xiubo, Wang Huaming. Wear resistance and high temperature oxidation resistance of laser cladding metal silicide composite coating on TiAl alloy[J]. China Laser, 2005, 12(8): 1143-1149.
[28]Feng Y, Feng K, Yao C, et al. High temperature oxidation and wear resistance of in situ synthesized (Ti₃Al+TiB)/Ti composites by laser cladding[J]. Metallurgical and Materials Transactions A, 2019, 50(7): 3414-3428.
[29]黄开金, 林鑫, 陈池, 等. AZ91D镁合金表面激光熔覆Zr-Cu-Ni-Al/TiC复合粉末的组织与磨损[J]. 中国激光, 2007, 10(4): 103-108.
Huang Kaijin, Lin Xin, Chen Chi, et al. Microstructure and wear of laser cladding Zr-Cu-Ni-Al/TiC composite powder on AZ91D magnesium alloy[J]. China Laser, 2007, 10(4): 103-108.
[30]蒋松林, 陈志勇, 朱卫华, 等. TC4钛合金表面激光熔覆C与BN粉末原位生成复合涂层[J]. 激光与红外, 2010, 40(5): 459-462.
Jiang Songlin, Chen Zhiyong, Zhu Weihua, et al. In situ composite coating of C and BN powder on TC4 titanium alloy by laser cladding[J]. Laser and Infrared, 2010, 40(5): 459-462.
[31]Li J, Chen C, Squartini T, et al. A study on wear resistance and microcrack of the Ti₃Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy[J]. Applied Surface Science, 2010, 257(5): 1550-1555.
[32]Prasad R, Waghmare D T, Kumar K, et al. Effect of overlapping condition on large area NiTi layer deposited on Ti-6Al-4V alloy by TIG cladding technique[J]. Surface and Coatings Technology, 2018, 28(9): 385-389.
[33]马玲玲, 李涵, 孙琳, 等, 钛合金表面激光熔覆Ti/Ni-AlN复合涂层的组织与摩擦磨损性能[J]. 热加工工艺, 2018, 47(4): 180-184.
Ma Lingling, Li Han, Sun Lin, et al. Microstructure and friction and wear properties of laser cladding Ti/Ni AlN composite coating on titanium alloy[J]. Hot working Technology, 2018, 47 (4): 180-184.
[34]Yanan L, Ronglu S, Wei N, et al. Effects of CeO₂ on microstructure and properties of TiC/Ti₂Ni reinforced Ti-based laser cladding composite coatings[J]. Optics and Lasers in Engineering, 2019, 120: 84-94.
[35]Wang K, Du D, Liu G, et al. Microstructure and properties of WC reinforced Ni-based composite coatings with Y₂O₃ addition on titanium alloy by laser cladding[J]. Science and Technology of Welding and Joining, 2019, 10(7): 1-8.
[36]胡淑慧. 钛合金表面激光熔覆生物陶瓷涂层组织及性能的研究[D]. 武汉: 华中科技大学, 2012.
Hu Shuhui. Study on microstructure and properties of laser cladding bioceramic coating on titanium alloy[D]. Wuhan: Huazhong University of Science and Technology, 2012.
[37]孙楚光, 刘均环, 陈志勇, 等. 钛合金表面激光熔覆制备低含硅量生物陶瓷涂层[J]. 红外与激光工程, 2018, 47(3): 95-101.
Sun Chuguang, Liu Junhuan, Chen Zhiyong, et al. Preparation of low silicon bioceramic coating on titanium alloy by laser cladding[J]. Infrared and Laser Engineering, 2018, 47(3): 95-101.
[38]Wang Huiping, Li Jun, Zhang Guangjun, et al. Microstructure and wear resistance of laser clad TiC coating on TC4 titanium alloy surface[J]. Heat Treatment of Metals, 2010, 16(8): 38-41.
[39]施佳鑫. 钛合金表面激光熔覆制备稀土掺杂梯度生物陶瓷涂层[D]. 衡阳: 南华大学, 2020.
Shi Jiaxin. Preparation of rare earth doped gradient bioceramic coating by laser cladding on titanium alloy[D]. Hengyang: University of South China, 2020.
[40]刘均环, 朱卫华, 朱红梅, 等. 掺杂低含量SiO₂对激光熔覆CaP生物陶瓷涂层性能的影响[J]. 红外与激光工程, 2019, 48(6): 351-357.
Liu Junhuan, Zhu Weihua, Zhu Hongmei, et al. Effect of doping low content SiO₂ on properties of laser cladding CaP bioceramic coating[J]. Infrared and Laser Engineering, 2019, 48(6): 351-357.
[41]张维平, 刘中华, 赵玉兰. 钛合金表面激光熔覆Ni-Ti-Cr-C复合涂层组织结构研究[J]. 激光杂志, 2008, 8(4): 59-60.
Zhang Weiping, Liu Zhonghua, Zhao Yulan. Microstructure of laser cladding Ni-Ti-Cr-C composite coating on titanium alloy[J]. Laser Journal, 2008, 8(4): 59-60.
[42]盛波, 顾怀章, 李龙, 等. 激光熔覆SiO₂/La₂O₃梯度生物陶瓷涂层生物活性研究[J]. 表面技术, 2020, 49(7): 35-41, 52.
Sheng Bo, Gu Huaizhang, Li Long, et al.Bioactivity of SiO₂/La₂O₃ gradient bio-ceramic coating fabricated by laser cladding[J]. Surface Technology, 2020, 49(7): 35-41, 52.
[43]单晓浩, 王存山, 于群. 钛合金表面激光熔覆Nb-Al-Ti高温合金涂层组织与性能[J]. 中国激光, 2016, 43(8): 190-197.
Shan Xiaohao, Wang Cunshan, Yu Qun. Microstructure and properties of laser cladding Nb-Al-Ti superalloy coating on titanium alloy[J]. China Laser, 2016, 43(8): 190-197.
[44]苏科强. TC4合金表面激光熔覆Ti/TiBCN涂层的组织与性能研究[D]. 太原: 中北大学, 2019.
[45]韩杰阁. 激光合金化制备TC4钛合金抗高温氧化及耐磨复合涂层性能研究[D]. 武汉: 华中科技大学, 2017.