汽车用高强塑积中锰钢的研究进展

doi:10.13251/j.issn.0254-6051.2022.09.046

摘要/Abstract

摘要： 以高强塑积中锰钢为对象,重点探讨了高强塑积中锰钢合金化、热加工工艺对组织调控的影响机制,以及不同组织对中锰钢强塑积的影响,为高强塑积中锰钢的研发、制备提供参考。此外,对中锰钢组织调控、性能强化的进一步研究也提出了相关建议。

Abstract: Taking high product of strength and elongation medium manganese steel as subject, the influence mechanism of alloying and hot working process on the structure regulation of high product of strength and elongation medium manganese steel was reviewed, as well as the influence of different structures on product of strength and elongation of medium manganese steel, providing reference for the research, development and preparation of medium manganese steel. In addition, further research on the structure regulation and performance enhancement of medium manganese steel also put forward relevant suggestions.

Key words: medium manganese steel, alloying, rolling process, heat treatment, strengthening mechanism

中图分类号:

TG142.7

王明明, 马飞, 裴未迟, 李冬冬, 龙海洋, 纪宏超, 刘帅. 汽车用高强塑积中锰钢的研究进展[J]. 金属热处理, 2022, 47(9): 272-280.

Wang Mingming, Ma Fei, Pei Weichi, Li Dongdong, Long Haiyang, Ji Hongchao, Liu Shuai. Research progress of medium manganese steels with high product of strength and elongation for automobile[J]. Heat Treatment of Metals, 2022, 47(9): 272-280.

参考文献

[1]Hamada A S, Karjalainen L P, Somani M C. The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels[J]. Materials Science and Engineering A, 2007, 467(1/2): 114-124.
[2]Hu B, Luo H W, Yang F, et al. Recent progress in medium-Mn steels made with new designing strategies, a review[J]. Journal of Materials Science and Technology, 2017, 33(12): 1457-1464.
[3]Suh D W, Kim S J. Medium Mn transformation-induced plasticity steels: Recent progress and challenges[J]. Scripta Materialia, 2017, 126: 63-67.
[4]Speer J, Matlock D K, De Cooman B C, et al. Carbon partitioning into austenite after martensite transformation[J]. Acta Materialia, 2003, 51(9): 2611-2622.
[5]Lun N, Saha D C, Macwan A, et al. Microstructure and mechanical properties of fibre laser welded medium manganese TRIP steel[J]. Materials and Design, 2017, 131: 450-459.
[6]Lee S, Lee K, De Cooman B C. Observation of the TWIP plus TRIP plasticity-enhancement mechanism in Al-added 6 Wt Pct medium Mn steel[J]. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2015, 46A(6): 2356-2363.
[7]王明明, 张晓妍, 肖亚茹, 等. 汽车用高强塑积钢关键研究进展之一:Q&P钢的研究进展[J]. 材料热处理学报, 2019, 40(6): 11-19.
Wang Mingming, Zhang Xiaoyan, Xiao Yaru, et al. One of the key research progress in high-strength plastic-plastic steels for automobiles: Research progress in Q&P steel[J]. Transactions of Materials and Heat Treatment, 2019, 40(6): 11-19.
[8]董瀚, 曹文全, 时捷, 等. 第3代汽车钢的组织与性能调控技术[J]. 钢铁, 2011, 46(6): 1-11.
Dong Han, Cao Wenquan, Shi Jie, et al. Microstructure and performance control technology of the 3^rd generation auto sheet steels[J]. Iron and Steel, 2011, 46(6): 1-11.
[9]王存宇, 常颖, 周峰峦, 等. 高强度高塑性第三代汽车钢的M3组织调控理论与技术[J]. 金属学报, 2020, 56(4): 400-410.
Wang Cunyu, Chang Ying, Zhou Fengluan, et al. M3 microstructure control theory and technology of the third-generation automotive steels with high strength and high ductility[J]. Acta Metallurgica Sinica, 2020, 56(4): 400-410.
[10]Shen Y F, Qiu L N, Sun X, et al. Effects of retained austenite volume fraction, morphology, and carbon content on strength and ductility of nanostructured TRIP-assisted steels[J]. Materials Science and Engineering A, 2015, 636: 551-564.
[11]De Moor E, Matlock D K, Speer J G, et al. Austenite stabilization through manganese enrichment[J]. Scripta Materialia, 2011, 64(2): 185-188.
[12]Li X, Song R B, Zhou N P, et al. An ultrahigh strength and enhanced ductility cold-rolled medium-Mn steel treated by intercritical annealing[J]. Scripta Materialia, 2018, 154: 30-33.
[13]Schemmann L, Zaefferer S, Raabe D, et al. Alloying effects on microstructure formation of dual phase steels[J]. Acta Materialia, 2015, 95: 386-398.
[14]Sun B, Fazeli F, Scott C, et al. Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions[J]. Materials Science and Engineering A, 2018, 729: 496-507.
[15]Sun B, Fazeli F, Scott C, et al. The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels[J]. Acta Materialia, 2018, 148: 249-262.
[16]Furukawa T, Huang H, Matsumura O. Effects of carbon content on mechanical properties of 5%Mn steels exhibiting transformation induced plasticity[J]. Metal Science Journal, 2014, 10(11): 964-970.
[17]Liu L, He B, Huang M. The role of transformation-induced plasticity in the development of advanced high strength steels[J]. Advanced Engineering Materials, 2018, 20(6): 1701083.
[18]赵彦乐, 邹宇明, 丁桦. C含量对冷轧Fe-6Mn-1Al中锰钢组织与性能的影响[J]. 金属热处理, 2022, 47(2): 35-40.
Zhao Yanle, Zou Yuming, Ding Hua. Effect of C content on microstructure and mechanical properties of cold-rolled Fe-6Mn-1Al medium manganese steel[J]. Heat Treatment of Metals, 2022, 47(2): 35-40.
[19]Lee H, Jo M C, Sohn S S, et al. Novel medium-Mn (austenite plus martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20% ductility by Mn-segregation-induced TRIP mechanism[J]. Acta Materialia, 2018, 147: 247-260.
[20]Jacques P, Furnemont Q, Mertens A, et al. On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity[J]. Philosophical Magazine A, 2001, 81(7): 1789-1812.
[21]Jeong K, Jin J E, Jung Y S, et al. The effects of Si on the mechanical twinning and strain hardening of Fe-18Mn-0.6C twinning-induced plasticity steel[J]. Acta Materialia, 2013, 61(9): 3399-3410.
[22]Li Z C, Misra R D K, Cai Z H, et al. Mechanical properties and deformation behavior in hot-rolled 0.2C-1.5/3Al-8.5Mn-Fe TRIP steel: The discontinuous TRIP effect[J]. Materials Science and Engineering A, 2016, 673: 63-72.
[23]Yi H L, Ghosh S K, Liu W J, et al. Non-equilibrium solidification and ferrite in δ-TRIP steel[J]. Materials Science and Technology, 2010, 26(7): 817-823.
[24]Cai Z H, Ding H, Xue X, et al. Significance of control of austenite stability and three-stage work-hardening behavior of an ultrahigh strength-high ductility combination transformation-induced plasticity steel[J]. Scripta Materialia, 2013, 68(11): 865-868.
[25]Suh D W, Park S J, Lee T H, et al. Influence of Al on the microstructural evolution and mechanical behavior of low-carbon, manganese transformation-induced-plasticity steel[J]. Metallurgical and Materials Transactions A, 2010, 41A(2): 397-408.
[26]Zhang Yongjian, Hui Weijun, Wang Jiaojiao, et al. Enhancing the mechanical properties of Al-containing medium Mn steel through warm rolling and intercritical annealing[J]. Steel Research International, 2019, 90(3): 1800412.
[27]Xu Y B, Hu Z P, Zou Y, et al. Effect of two-step intercritical annealing on microstructure and mechanical properties of hot-rolled medium manganese TRIP steel containing δ-ferrite[J]. Materials Science and Engineering A, 2017, 688(14): 40-55.
[28]Benzing J T, Kwiatkowski D S A, Morsdorf L, et al. Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel[J]. Acta Materialia, 2019, 166: 512-530.
[29]Zhou T P, Wang C Y, Wang C, et al. Strong interactions between austenite and the matrix of medium-Mn steel during intercritical annealing[J]. Materials, 2020, 13(15): 3366.
[30]Han J, Da Silva A K, Ponge D, et al. The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel[J]. Acta Materialia, 2017, 122: 199-206.
[31]Chbihi A, Barbier D, Germain L, et al. Interactions between ferrite recrystallization and austenite formation in high-strength steels[J]. Journal of Materials Science, 2014, 49(10): 3608-3621.
[32]Kuzmina M, Ponge D, Raabe D. Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9wt.% medium Mn steel[J]. Acta Materialia, 2015, 86: 182-192.
[33]Sun B, Palanisamy D, Ponge D, et al. Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite[J]. Acta Materialia, 2019, 164: 683-696.
[34]Hu Z P, Xu Y B, Zou Y, et al. Effect of intercritical rolling temperature on microstructure-mechanical property relationship in a medium Mn-TRIP steel containing delta ferrite[J]. Materials Science & Engineering A, 2018, 720: 1-10.
[35]He B B, Wang M, Huang M X. Resetting the austenite stability in a medium Mn steel via dislocation engineering[J]. Metallurgical and Materials Transactions A, 2019, 50(6): 2971-2977.
[36]He B B, Liang Z Y, Huang M X. Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel[J]. Scripta Materialia, 2018, 150: 134-138.
[37]Hu B, Luo H. A novel two-step intercritical annealing process to improve mechanical properties of medium Mn steel[J]. Acta Materialia, 2019, 176: 250-263.
[38]Luo H W, Qiu C H, Dong H, et al. Experimental and numerical analysis of influence of carbide on austenitisation kinetics in 5Mn TRIP steel[J]. Materials Science and Technology, 2014, 30(11): 1367-1377.
[39]Luo H, Liu J, Dong H. A novel observation on cementite formed during intercritical annealing of medium Mn steel[J]. Metallurgical and Materials Transactions A, 2016, 47(6): 3119-3124.
[40]Ding R, Dai Z, Huang M, et al. Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0. 2C-8Mn-2Al medium Mn steel[J]. Acta Materialia, 2018, 147: 59-69.
[41]白韶斌, 肖文涛, 牛伟强, 等. 退火和退火-时效工艺对热轧中锰钢组织及性能的影响[J]. 金属热处理, 2022, 47(1): 245-249.
Bai Shaobin, Xiao Wentao, Niu Weiqiang, et al. Influence of annealing and annealing-aging process on microstructure and mechanical properties of hot-rolled medium manganese steel[J]. Heat Treatment of Metals, 2022, 47(1): 245-249.