热加工对冷喷涂铝合金块材性能的影响

doi:10.13251/j.issn.0254-6051.2023.04.020

金属热处理 ›› 2023, Vol. 48 ›› Issue (4): 123-129.DOI: 10.13251/j.issn.0254-6051.2023.04.020

热加工对冷喷涂铝合金块材性能的影响

吴畏¹, 张留艳¹, 郑之栋¹, 郑洪迪¹, 刘垲燚¹, 谭桂斌², 揭晓华¹

1.广东工业大学材料与能源学院, 广东广州 510006;
2.广东工业大学机电工程学院, 广东广州 510006

收稿日期:2022-10-08 修回日期:2022-12-27 发布日期:2023-05-27
通讯作者: 张留艳,副教授,博士, E-mail:zlyjust@gdut.edu.cn
作者简介:吴畏(1995—),男,硕士研究生,主要研究方向为材料制备与性能,E-mail:1692267165@qq.com。
基金资助:
国家自然科学基金(52105176, 51709049);广东省引进创新创业团队项目(2019BT02Z393);工业摩擦润滑技术国家地方联合工程研究中心开放课题(2021-GD-006)

Effect of hot working on properties of cold sprayed aluminum alloy bulk

Wu Wei¹, Zhang Liuyan¹, Zheng Zhidong¹, Zheng Hongdi¹, Liu Kaiyi¹, Tan Guibin², Jie Xiaohua¹

1. School of Materials and Energy, Guangdong University of Technology, Guangzhou Guangdong 510006, China;
2. School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou Guangdong 510006, China

Received:2022-10-08 Revised:2022-12-27 Published:2023-05-27

摘要/Abstract

摘要： 为了提高冷喷涂增材制造铝基块材性能,对低压冷喷涂法沉积的7075铝合金块材进行了后续退火和热轧加工。采用光学显微镜和扫描电镜观察试样的组织结构特征,并通过拉伸试验和电化学测试表征了块材的应力-应变曲线和耐蚀性。结果表明,低压冷喷涂法沉积的铝合金块材结构上存在大量的颗粒界面和少量微孔等缺陷,拉伸时发生脆性断裂,塑性很差,耐点蚀性能差;经过400 ℃退火4 h后,结构缺陷显著减少;再经过30%压下量的热轧加工后,结构更加致密,强度和韧性均提高,耐蚀性也随着结构缺陷的减少而提高。

关键词: 铝合金, 冷喷涂, 热处理, 热轧, 韧性, 耐蚀性

Abstract: In order to improve properties, 7075 aluminum alloy bulks prepared by low-pressure cold spraying were further processed by annealing and hot rolling. The microstructure characteristics of the bulks were observed by means of metallographic microscope and scanning electron microscope, and the stress-strain curves and corrosion resistance were characterized by tensile test and electrochemical test. The results show that a large number of particle interfaces and a small number of micro-holes exist in the structure of cold sprayed aluminum alloy bulks, which leads to brittle fracture, poor plasticity and poor pitting corrosion resistance. After annealing at 400 ℃ for 4 h, the structural defects of the spraying deposited bulks are significantly reduced. After hot rolling with 30% reduction, the structure of the spraying deposited bulks is more compact and the strength and toughness are improved, and the corrosion resistance increases due to the reduction of structural defects.

Key words: aluminum alloy, cold spraying, heat treatment, hot rolling, toughness, corrosion resistance

中图分类号:

吴畏, 张留艳, 郑之栋, 郑洪迪, 刘垲燚, 谭桂斌, 揭晓华. 热加工对冷喷涂铝合金块材性能的影响[J]. 金属热处理, 2023, 48(4): 123-129.

Wu Wei, Zhang Liuyan, Zheng Zhidong, Zheng Hongdi, Liu Kaiyi, Tan Guibin, Jie Xiaohua. Effect of hot working on properties of cold sprayed aluminum alloy bulk[J]. Heat Treatment of Metals, 2023, 48(4): 123-129.

参考文献

[1]吴洪键, 李文波, 邓春明, 等. 冷喷涂增材制造关键技术[J]. 中国表面工程, 2020, 33(4): 1-15.
Wu Hongjian, Li Wenbo, Deng Chunming, et al. Key techniques of cold spray additive manufacturing[J]. China Surface Engineering, 2020, 33(4): 1-15.
[2]李文亚, 余敏. 冷喷涂技术的最新研究现状[J]. 表面技术, 2010, 39(5): 95-99.
Li Wenya, Yu Min, The latest development state of the cold spraying technique[J]. Surface Technology, 2010, 39(5): 95-99.
[3]顾波. 增材制造技术国内外应用与发展趋势[J]. 金属加工(热加工), 2022(3): 1-16.
[4]文世峰, 季羡泰. 激光选区烧结技术的研究现状及应用进展[J]. 苏州市职业大学学报, 2018, 29(1): 26-31.
Wen Shifeng, Ji Xiantai. Review on research and application of selective laser sintering technology[J]. Journal of Suzhou Vocational University, 2018, 29(1): 26-31.
[5]卢秉恒, 李涤尘. 增材制造(3D打印)技术发展[J]. 机械制造与自动化, 2013, 42(4): 1-4.
Lu Bingheng, Li Dichen. Development of the additive manufacturing (3D printing) technology[J]. Machine Building and Automation, 2013, 42(4): 1-4.
[6]李文亚, 张冬冬, 黄春杰, 等. 冷喷涂技术在增材制造和修复再制造领域的应用研究现状[J]. 焊接, 2016(4): 2-8.
Li Wenya, Zhang Dongdong, Huang Chunjie, et al. State of the art of cold spraying additive manufacturing and remanufacturing[J]. Welding and Joining, 2016(4): 2-8.
[7]Irissou E, Legoux J, Ryabinin A N, et al. Review on cold spray process and technology: Part I-Intellectual property[J]. Journal of Thermal Spray Technology, 2008, 17(4): 495-516.
[8]Lee J C, Kang H J, Chu W S, et al. Repair of damaged mold surface by cold-spray method[J]. CIRP Annals, 2007, 56(1): 577-580.
[9]Dean S W, Potter J K, Yetter R A, et al. Energetic intermetallic materials formed by cold spray[J]. Intermetallics, 2013, 43: 121-130.
[10]Luo X, Wei Y, Wang Y, et al. Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying[J]. Materials and Design, 2015, 85: 527-533.
[11]Irissou E, Legoux J, Arsenault B, et al. Investigation of Al-Al₂O₃ cold spray coating formation and properties[J]. Journal of Thermal Spray Technology, 2007, 16(5/6): 661-668.
[12]Yin S, Cavaliere P, Aldwell B, et al. Cold spray additive manufacturing and repair: Fundamentals and applications[J]. Additive Manufacturing, 2018, 21: 628-650.
[13]Li Z, Yang X, Zhang J, et al. Interfacial mechanical behavior and electrochemical corrosion characteristics of cold-sprayed and hot-rolled titanium/stainless-steel couples[J]. Advanced Engineering Materials, 2016, 18(7): 1240-1249.
[14]Tariq N H, Gyansah L, Qiu X, et al. Thermo-mechanical post-treatment: A strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites[J]. Materials and Design, 2018, 156: 287-299.
[15]Qiu X, Tariq N U H, Qi L, et al. In-situ Si_p/A380 alloy nano/micro composite formation through cold spray additive manufacturing and subsequent hot rolling treatment: Microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 2019, 780: 597-606.

热加工对冷喷涂铝合金块材性能的影响

Effect of hot working on properties of cold sprayed aluminum alloy bulk

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	程志远, 孙宁, 郭丰佳, 王志雄, 李涛, 王经涛. 回归再时效工艺对7055铝合金板材组织及性能的影响[J]. 金属热处理, 2023, 48(4): 130-136.
[2]	徐海峰, 李海, 李凤敏, 付胜敏, 明科宇, 郁言. 合金元素及热处理对新型槽帮钢组织与性能的影响[J]. 金属热处理, 2023, 48(4): 148-154.
[3]	韩贵生, 张学敏, 李海涛, 樊帅奇, 戴姣燕, 徐金富. 42CrMoVNb钢的热处理工艺优化及力学性能[J]. 金属热处理, 2023, 48(4): 161-165.
[4]	王博, 高坤元, 丁宇升, 文胜平, 黄晖, 吴晓蓝, 魏午, 聂祚仁. Er、Zr微合金化5083铝合金的超塑性[J]. 金属热处理, 2023, 48(4): 178-183.
[5]	孙浩鸣, 刘崇宇, 石磊, 张磊, 肖济金. 添加Sc和提高Zn含量对7085铝合金力学性能、淬火敏感性和耐蚀性能的影响[J]. 金属热处理, 2023, 48(4): 196-203.
[6]	陈素明, 杨平, 任树锋, 罗贤, 王文博. 30CrMnSiNi2A钢轴类零件感应热处理的数值模拟[J]. 金属热处理, 2023, 48(4): 235-244.
[7]	林丹, 谷高扬, 商剑. 激光重熔处理对铝合金微弧氧化层组织及性能的影响[J]. 金属热处理, 2023, 48(4): 264-272.
[8]	田力男, 张丰收, 李俊峰, 白丽, 王鲁, 乔立捷, 冯可云. G115钢管埋弧自动焊焊缝冲击性能不足的原因分析及热处理修复措施[J]. 金属热处理, 2023, 48(4): 293-297.
[9]	王翠英, 杨有才, 柯美武, 褚小菲, 王伟. 7A04铝合金壳体失效分析[J]. 金属热处理, 2023, 48(4): 298-302.
[10]	董小虹, 徐跃明, 常玉敏, 李俏, 王广生. GB/T 38819—2020《绿色热处理技术要求及评价》解读[J]. 金属热处理, 2023, 48(4): 307-315.
[11]	孙德福, 孙智程, 谷臻, 席生岐, 孙崇锋, 李世亮, 苏成明, 王春昌. 机械合金化时间对Ni₆Cr₄W_1.5Fe₉Ti高熵合金激光熔覆涂层组织与耐蚀性的影响[J]. 金属热处理, 2023, 48(3): 1-7.
[12]	蒋宏利, 王东梅, 王业双, 张衡, 陈林. 轧后热处理对珠光体钢轨相变组织及硬度的影响[J]. 金属热处理, 2023, 48(3): 19-24.
[13]	邓红玲, 张思雨, 钟辉隆, 李声慈, 齐亮, 陈继强. 固溶处理对稀土改性Al-Zn-Mg-Cu合金组织及性能的影响[J]. 金属热处理, 2023, 48(3): 32-38.
[14]	赵宇, 魏午, 黄晖, 刘贞山, 任思蒙, 董阳, 王玉刚, 石薇. 6070铝合金的均匀化热处理[J]. 金属热处理, 2023, 48(3): 51-56.
[15]	樊世冲, 孙金钊, 申志浩, 鲁克锋, 刘亚凡, 王鸿琪, 殷凤仕. 热处理对ZG45Cr5Ni2Mo耐磨钢组织和性能的影响[J]. 金属热处理, 2023, 48(3): 57-61.