去应力退火对B10铜镍合金厚壁三通表面残余应力及组织性能的影响

doi:10.13251/j.issn.0254-6051.2023.07.019

金属热处理 ›› 2023, Vol. 48 ›› Issue (7): 111-116.DOI: 10.13251/j.issn.0254-6051.2023.07.019

去应力退火对B10铜镍合金厚壁三通表面残余应力及组织性能的影响

王军亮, 周铁柱, 付利国, 郁炎, 李春辉

中国船舶集团有限公司第七二五研究所, 河南洛阳 471000

收稿日期:2023-02-16 修回日期:2023-05-31 出版日期:2023-07-25 发布日期:2023-09-04
作者简介:王军亮(1994—),男,助理工程师,硕士,主要研究方向为金属材料加工成型,E-mail:18570770155@163.com。
基金资助:
国家重点研发计划(2021YFB3700700)

Influence of stress relieving annealing on surface residual stress,microstructure and properties of B10 colomony equal diameter tee

Wang Junliang, Zhou Tiezhu, Fu Liguo, Yu Yan, Li Chunhui

Luoyang Ship Material Research Institute, Luoyang Henan 471000, China

Received:2023-02-16 Revised:2023-05-31 Online:2023-07-25 Published:2023-09-04

摘要/Abstract

摘要： 在不同退火温度和保温时间下对冷推制成形B10铜镍合金厚壁三通管件进行真空去应力退火处理,研究B10铜镍合金厚壁三通管件去应力退火前后力学性能及残余应力的变化规律。结果表明,冷成形后等径三通主管、支管表面残余应力为压应力,主管与支管过渡位置表面残余应力为拉应力;去应力退火在不损害力学性能的前提下对B10铜镍合金等径三通表面残余应力消除明显。在本试验范围内,经300 ℃退火1 h随炉冷却,管件轴向和切向的残余应力基本消除。

关键词: B10铜镍合金厚壁三通, 去应力退火, 表面残余应力, 力学性能

Abstract: Vacuum stress relieving annealing of the B10 colomony equal diameter tee formed by internal high pressure was implemented at different temperatures and holding time. The evolution of mechanical properties and residual stress of the B10 colomony equal diameter tee during stress removal annealing was researched. The results show that the surface residual stress of the main pipe and branch pipe of equal diameter tee is compressive stress, and the surface residual stress of the transition position between the main pipe and branch pipe of equal diameter tee is tensile stress. On the premise of not damaging mechanical properties, stress removal annealing can obviously eliminate the surface residual stress of the B10 colomony equal diameter tee. In the range of orthogonal, axial and shear residual stresses of pipe fitting are basically eliminated after annealing at 300 ℃ for 1 h and cooling with the furnace.

Key words: B10 colomony equal diameter tee, stress relieving annealing, surface residual stress, mechanical properties

中图分类号:

TG146.2

王军亮, 周铁柱, 付利国, 郁炎, 李春辉. 去应力退火对B10铜镍合金厚壁三通表面残余应力及组织性能的影响[J]. 金属热处理, 2023, 48(7): 111-116.

Wang Junliang, Zhou Tiezhu, Fu Liguo, Yu Yan, Li Chunhui. Influence of stress relieving annealing on surface residual stress,microstructure and properties of B10 colomony equal diameter tee[J]. Heat Treatment of Metals, 2023, 48(7): 111-116.

参考文献

[1]Cai J, Wang K S, Miao C P, et a1. Constitutive analysis to predict high-temperature flow behavior of BFe10-1-2 cupronickel alloy in consideration of strain[J]. Materials and Design, 2015, 65: 272-279.
[2]周大地, 曾卫东, 刘江林, 等. 去应力退火对薄壁钛管表面残余应力的影响[J]. 中国有色金属学报, 2019, 29(7): 1384-1390.
Zhou Dadi, Zeng Weidong, Liu Jianglin, et a1. Effect of stress relieving annealing on surface residual stress of thin-walled Ti pipe[J]. The Chinese Journal of Nonferrous Metals, 2019, 29(7): 1384-1390.
[3]任泉庄, 黄峰, 郭正洪. 中碳淬火-配分钢中的残余应力分布[J]. 金属热处理, 2016, 41(10): 1-5.
Ren Quanzhuang, Huang Feng, Guo Zhenghong. Distribution of residual stress in medium carbon quenching-partitioning steel[J]. Heat Treatment of Metals, 2016, 41(10): 1-5.
[4]Zhang S, Wu Y, Hai G. A modeling of residual stress in stretched aluminum alloy plate[J]. Journal of Materials Processing Technology, 2012, 212(11): 2463-2473.
[5]范宁, 熊柏青, 李志辉, 等. 预拉伸变形量对7055铝合金厚板表面残余应力的影响[J]. 中国有色金属学报, 2020, 30(2): 301-307.
Fan Ning, Xiong Baiqing, Li Zhihui, et al. Influence of pre-stretched ratio on surface residual stress of 7055 aluminum alloy thick plate[J]. The Chinese Journal of Nonferrous Metals, 2020, 30(2): 301-307.
[6]罗家豪, 陈重毅, 宿鹏吉, 等. 降低冷轧取向硅钢残余应力和位错密度的磁-热耦合工艺[J]. 金属热处理, 2022, 47(11): 111-116.
Luo Jiahao, Chen Zhongyi, Su Pengji, et a1. Magnetic-thermal coupling to reduce residual stress and dislocation density of cold-rolled oriented silicon steel[J]. Heat Treatment of Metals, 2022, 47(11): 111-116.
[7]解志鹏, 于晓华, 张雁南, 等. TA2阳极氧化膜的表面残余应力对抗腐蚀性能和组织的影响[J]. 金属热处理, 2018, 43(12): 25-30.
Xie Zhipeng, Yu Xiaohua, Zhang Yannan, et al. Effect of surface residual stress on microstructure and corrosion resistance of TA2 anodic oxidation film[J]. Heat Treatment of Metals, 2018, 43(12): 25-30.
[8]王继周, 李晋霞, 石路, 等. 冷变形管材残余应力测试与分析[J]. 稀有金属材料与工程, 1997, 26(5): 32-35.
Wang Jizhou, Li Jinxia, Shi Lu, et a1. Test and analyses on residual stress of cold worked tube[J]. Rare Metal Material and Engineering, 1997, 26(5): 32-35.
[9]时阳, 陈智君, 张群莉, 等. 镍基高温合金表面激光熔覆Inconel738合金层的开裂行为[J]. 金属热处理, 2011, 36(3): 72-76.
Shi Yang, Chen Zhijun, Zhang Qunli, et al. Cracking behavior of Inconel738 alloy on Ni-base superalloy surface by laser cladding[J]. Heat Treatment of Metals, 2011, 36(3): 72-76.
[10]李文涛, 林振铭, 汪宏斌, 等. 冷轧带钢退火处理中残余应力变化规律研究[J]. 上海金属, 2016, 38(1): 42-45.
Li Wentao, Lin Zhenming, Wang Hongbin, et al. Study on residual stress evolution of cold-rolled strip in annealing process[J]. Shanghai Metals, 2016, 38(1): 42-45.
[11]黄亮, 徐哲, 代春, 等. TA18钛合金管材多行程皮尔格冷轧过程三维有限元模拟: Ⅱ. 塑性变形行为分析[J]. 稀有金属材料与工程, 2013, 42(4): 741-745.
Huang Liang, Xu Zhe, Dai Chun, et al. Three-dimensional FE simulation of multi-strokes pilgering cold roll of TA18 titanium alloy tube: Ⅱ. Analysis of plastic deformation behavior[J]. Rare Metal Materials and Engineering, 2013, 42(4): 741-745.
[12]康超, 曾卫东, 张尧武, 等. 真空去应力退火对TC21 钛合金残余应力的影响[J]. 稀有金属材料与工程, 2011, 40(16): 154-156.
Kang Chao, Zeng Weidong, Zhang Yaowu, et a1. Influence of vacuum stress relieving annealing on residual stress of TC21 titanium alloy[J]. Rare Metal Materials and Engineering, 2011, 40(16): 154-156.
[13]张霜银, 林鑫, 陈静, 等. 热处理对激光立体成形TC4 残余应力的影响[J]. 稀有金属材料与工程, 2009, 38(5): 774-778.
Zhang Shuangyin, Lin Xin, Chen Jing, et al. Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming[J]. Rare Metal Materials and Engineering, 2009, 38(5): 774-778.
[14]Qu S G, Lou H S, Li X Q, et al. Effect of heat-treatment on stress relief and dimensional stability behavior of SiCp/Al composite with high SiC content[J]. Materials and Design, 2015, 86: 508-515.
[15]Kapoor K, Lahira D, Ramana Rao S V, et al. Influence of crystallographic texture on X-ray residual stress measurement for Ti-3wt%Al-2wt%V tube material[J]. Journal of Testing and Evaluation, 2003, 31(6): 1-7.
[16]崔振铎, 刘华山, 易丹青. 金属材料及热处理[M]. 长沙: 中南大学出版社, 2010.
[17]王亚飞. 去应力退火对强力旋压锡青铜筒形件残余应力、组织及性能影响[D]. 太原: 中北大学, 2021.
Wang Yafei. Effect of stress removing annealing on residual stress, microstructure and properties of strongly rotated tin bronze cylindrical parts[D]. Taiyuan: North University of China, 2021.

去应力退火对B10铜镍合金厚壁三通表面残余应力及组织性能的影响

Influence of stress relieving annealing on surface residual stress,microstructure and properties of B10 colomony equal diameter tee

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	吴忠潮, 周拥军, 段宝玉, 侯渊, 呼云飞, 高占勇. 20Si2Mn2CrNi钢Ms点下的等温转变组织及其强韧性[J]. 金属热处理, 2023, 48(7): 15-21.
[2]	刘宜林, 陈如柑, 贾玉心, 李玉胜, 范雯, 郑小腾. 异构中碳双相钢丝的微观组织与力学性能[J]. 金属热处理, 2023, 48(7): 32-37.
[3]	韩顺, 李刚, 杨豪, 厉鑫洋, 厉勇, 王春旭. 回火温度对N63钢组织及力学性能的影响[J]. 金属热处理, 2023, 48(7): 79-83.
[4]	刘永宝, 周丽娜, 刘明, 高翔, 石东丹. 回火参数对G95Cr18马氏体不锈钢显微组织及力学性能的影响[J]. 金属热处理, 2023, 48(7): 103-110.
[5]	唐鹏, 黄嘉良, 刘倩男, 邓松云. 时效时间对7075-T6铝合金组织与性能的影响[J]. 金属热处理, 2023, 48(7): 131-137.
[6]	熊雪刚, 陈述, 陈述, 吕兵, 张开华, 周磊磊, 周伟. 回火工艺对Q125高强油井管用钢组织和性能的影响[J]. 金属热处理, 2023, 48(7): 138-142.
[7]	胡武, 吴艳梅, 黄显赞, 黄炎毅, 廖斌. 预处理对6082铝合金型材性能的影响[J]. 金属热处理, 2023, 48(7): 143-147.
[8]	王浩军, 胡生双, 肖君, 张颖, 张颖云, 高婷婷, 欧阳德来. B-Ti57CuZrNi钎料对接钎焊TC4钛合金接头的组织和性能[J]. 金属热处理, 2023, 48(7): 148-151.
[9]	王会敏, 李炎光, 吴静依. 固溶时间对2219铝合金组织和力学性能的影响[J]. 金属热处理, 2023, 48(7): 152-156.
[10]	李世文, 熊伟, 张文亮, 王超, 高占勇. 20Si2Mn2CrNi钢锻后晶粒细化及强韧性提升工艺[J]. 金属热处理, 2023, 48(7): 157-161.
[11]	杨雄, 李鹏. 中温压力容器用钢15CrMoR的热处理工艺[J]. 金属热处理, 2023, 48(7): 181-186.
[12]	赵虎林, 苟藏红. 冷轧和退火对纯镍拼焊接头组织和力学性能的影响[J]. 金属热处理, 2023, 48(7): 197-200.
[13]	姬旺勤, 王晓兵, 周亚坤, 赵银. 电磁搅拌对Sr变质体育器材用铝基复合材料的影响[J]. 金属热处理, 2023, 48(7): 217-222.
[14]	高学然, 陈晓虎, 原思宇, 王旭. 汽车用Q&P钢的研究进展[J]. 金属热处理, 2023, 48(7): 245-253.
[15]	袁志钟, 王梦飞, 段旭斌, 杨海峰, 李表敏, 罗锐, 赵小强, 程晓农. 热处理对42CrMo钢截齿微观组织与力学性能的影响[J]. 金属热处理, 2023, 48(6): 1-8.