Nb元素对汽车渗碳齿轮用20CrMnTi钢热处理过程中晶粒粗化的影响

doi:10.13251/j.issn.0254-6051.2024.01.017

金属热处理 ›› 2024, Vol. 49 ›› Issue (1): 113-118.DOI: 10.13251/j.issn.0254-6051.2024.01.017

Nb元素对汽车渗碳齿轮用20CrMnTi钢热处理过程中晶粒粗化的影响

郑道友, 张瑞, 唐恩

浙江工贸职业技术学院, 浙江温州 325000

收稿日期:2023-09-13 修回日期:2023-12-05 发布日期:2024-02-29
通讯作者: 张瑞,副教授,硕士,E-mail:76191033@qq.com
作者简介:郑道友(1976—),男,副教授,硕士,主要研究方向为金属材料加工,E-mail:tangen68@gmail.com。
基金资助:
温州市基础性公益科研项目(G2023068)

Effect of Nb element on grain coarsening of automobile carburized gear steel 20CrMnTi during heat treatment

Zheng Daoyou, Zhang Rui, Tang En

Zhejiang Industry and Trade Vocational College, Wenzhou Zhejiang 325000, China

Received:2023-09-13 Revised:2023-12-05 Published:2024-02-29

摘要/Abstract

摘要： 分析了工业生产的两种汽车渗碳齿轮钢在相同伪渗碳工艺下的晶粒长大和析出颗粒分布情况,阐明了Nb元素在汽车渗碳齿轮钢中的作用。结果表明,添加0.02wt%Nb元素,可以减少0.02wt%Mo和0.02wt%Ti的添加量,但在960 ℃高温渗碳4 h后,Nb-Ti-Mo钢奥氏体晶粒尺寸略小于Ti-Mo钢,且混晶程度得到降低。此外,添加0.02wt%Nb元素,在960 ℃高温渗碳4 h后,Nb-Ti-Mo钢中析出颗粒体积分数略小于Ti-Mo钢,但是析出颗粒平均尺寸小于Ti-Mo钢,提供较好的钉扎作用,细化晶粒。添加0.02wt%Nb元素改善了析出颗粒的热稳定性,能够提供更优异的析出强化效果,析出强化贡献量为87.54 MPa。

关键词: Nb, 伪渗碳, 奥氏体, 晶粒尺寸, 析出

Abstract: Grain growth and precipitation particle distribution of two kinds of industrial carburized gear steels under the same pseudo-carburizing process were analyzed. Besides, the role of Nb element in automobile gear carburized steel was clarified. The results show that the addition of 0.02%wt Nb reduces the addition of 0.02%wt Mo and 0.02%wt Ti, and the austenite grain size of the Nb-Ti-Mo steel is slightly smaller than that of the Ti-Mo steel after carburizing at 960 ℃ for 4 h. Furthermore, the degree of mixed crystal is reduced in the Nb-Ti-Mo steel. In addition, with the addition of the Nb, the volume fraction of precipitated particles in Nb-Ti-Mo steel after carburizing at 960 ℃ for 4 h is slightly less than that of the Ti-Mo steel, but the average size of precipitated particles is smaller than that of the Ti-Mo steel, providing better pinning effect and grain refinement. The addition of the mass fraction of 0.02wt%Nb improves the thermal stability of precipitated particles and provides better precipitation strengthening effect, and the contribution of precipitation strengthening is 87.54 MPa.

Key words: Nb, pseudo-carburizing, austenite, grain size, precipitation

中图分类号:

TG142.1

郑道友, 张瑞, 唐恩. Nb元素对汽车渗碳齿轮用20CrMnTi钢热处理过程中晶粒粗化的影响[J]. 金属热处理, 2024, 49(1): 113-118.

Zheng Daoyou, Zhang Rui, Tang En. Effect of Nb element on grain coarsening of automobile carburized gear steel 20CrMnTi during heat treatment[J]. Heat Treatment of Metals, 2024, 49(1): 113-118.

参考文献

[1]吴园园, 石丽丽, 张继明. 齿轮钢中渗氮层深度及含量的测定方法[J]. 冶金分析, 2022, 42(10): 38-42.
Wu Yuanyuan, Shi Lili, Zhang Jiming. Determination method of depth and content of nitriding layer in gear steel[J]. Metallurgical Analysis, 2022, 42(10): 38-42.
[2]范斌, 刘利, 张时雨, 等. 齿轮钢20CrMnTiH淬透性/宏观偏析控制[J]. 连铸, 2023(1): 47-54.
Fan Bin. Liu Li, Zhang Shiyu, et al. Gear steel 20CrMnTiH hardenability/macro segregation control[J]. Continuous Casting, 2023(1): 47-54.
[3]张伟, 谌康, 李慧超, 等. Nb对20CrMo齿轮钢渗碳层深度和硬度的影响[J]. 金属热处理, 2021, 46(10): 31-34.
Zhang Wei, Shen Kang, Li Huichao, et al. Effect of Nb on carburizing depth and hardness of 20CrMo gear steel[J]. Heat Treatment of Metals, 2021, 46(10): 31-34.
[4]柳洋波, 崔京玉, 佟倩, 等. 铌对20CrMnTi钢渗碳过程中晶粒粗化行为的影响[J]. 材料热处理学报, 2015, 36(1): 124-131.
Liu Yangbo, Cui Jingyu, Tong Qian, et al. Effect of niobium on grain coarsening behavior of 20CrMnTi steel during carburizing[J]. Transactions of Materials and Heat Treatment, 2015, 36(1): 124-131.
[5]乔晓阳, 裴小芳, 崔冕, 等. 易切削齿轮钢22CrMoHS的开发[J]. 特殊钢, 2020, 41(3): 32-34.
Qiao Xiaoyang, Pei Xiaofang, Cui Mian, et al. Development of free cutting 22CrMoHS gear steel[J]. Special Steel, 2020, 41(3): 32-34.
[6]彭朝晖, 赵燕, 黄云奇. 齿轮用渗碳钢20CrMnTi渗碳畸变的研究[J]. 热加工工艺, 2008, 37(12): 77-81.
Peng Chaohui, Zhao Yan, Huang Yunqi. Study on carburizing distortion of 20CrMnTi case-hardened steel[J]. Hot Working Technology, 2008, 37(12): 77-81.
[7]王昊杰, 郝浩腾, 王昭东, 等. 渗碳工艺参数对常见渗碳钢晶粒粗化行为的影响[J]. 材料热处理学报, 2017, 38(3): 177-185.
Wang Haojie, Hao haoteng, Wang Zhaodong, et al. Effect of carburizing process parameters on austenitic grain coarsening behavior of common carburizing steel[J]. Transactions of Materials and Heat Treatment, 2017, 38(3): 177-185.
[8]戴新财. 渗碳齿轮钢晶粒粗化与渗碳工艺的关系推导[J]. 铸造技术, 2018, 39(7): 1586-1590.
Dai Xincai. Derivation of relationship between grain coarsening and carburizing process of gear steel[J]. Foundry Technology, 2018, 39(7): 1586-1590.

[1]	于金瑞, 吴康俊, 于鑫泓, 冯以盛, 赵而团. 含偏析贝氏体弹簧钢的等温转变特性[J]. 金属热处理, 2024, 49(1): 53-60.
[2]	许双辉, 何国爱. 退火温度对铝钛强韧的CrCoNi中熵合金组织与性能的影响[J]. 金属热处理, 2024, 49(1): 142-147.
[3]	张富伟, 朱海, 李晓晨, 王杨文, 高佩华, 王红鸿. 冷变形及再结晶热处理对高锰奥氏体低温钢硬度的影响[J]. 金属热处理, 2024, 49(1): 223-227.
[4]	袁志钟, 王梦飞, 张伯承, 段旭斌, 李表敏, 杨海峰, 罗锐, 程晓农. 冷作模具钢SKD11的热处理增韧技术[J]. 金属热处理, 2023, 48(9): 1-7.
[5]	孙博, 聂佳民, 李晓丹, 何长树. 强制冷却和低温时效对2198-T3/7A04-T6异种铝合金FSW接头组织及性能的影响[J]. 金属热处理, 2023, 48(9): 8-13.
[6]	李德明, 雷宁宁, 张晋刚, 宫涛, 周广浩. 快速回火对690 MPa级别工程机械用钢板组织和性能的影响[J]. 金属热处理, 2023, 48(9): 75-80.
[7]	魏咏梅, 李双喜, 汪美桃, 赵玉霞, 高洁, 陈琳. 奥氏体不锈钢氮钛离子共渗工艺[J]. 金属热处理, 2023, 48(9): 116-121.
[8]	黄元春, 马尚坤, 刘宇, 严积珺, 吴镇力. Gd含量对3003铝合金微观组织及导电率的影响[J]. 金属热处理, 2023, 48(9): 129-135.
[9]	邬冬生, 邓伟, 文辉, 于良机, 李凯昕, 王福明. 钒含量对时速350 km高铁制动盘用Cr-Mo-V钢奥氏体晶粒长大的影响[J]. 金属热处理, 2023, 48(9): 136-142.
[10]	宋操, 王晓东, 包喜荣, 陈林, 汤雪娇. Ce对30MnNbRE钢淬火回火微观组织和力学性能的影响[J]. 金属热处理, 2023, 48(9): 143-149.
[11]	李文刚, 炊鹏飞, 程尊鹏, 李春梅, 景然, 李江华, 廖仲尼. 硼含量对Ti-Zr-Nb-B合金显微组织及性能的影响[J]. 金属热处理, 2023, 48(9): 157-164.
[12]	周江, 项国东, 徐昶, 张显程, 夏咸喜, 朱保印, 赵彦芬, 金晓. 长时服役后HR3C钢析出相变化及对硬度的影响[J]. 金属热处理, 2023, 48(9): 203-207.
[13]	杨树林, 赵吉庆, 闫磊, 杨钢. эи866合金锻件径向条纹形成原因与消除工艺[J]. 金属热处理, 2023, 48(9): 279-282.
[14]	梁恩溥, 徐乐, 杨勇, 王毛球. Ni含量对NiAl-Cu强化40CrNi3MoV钢组织和力学性能的影响[J]. 金属热处理, 2023, 48(8): 1-7.
[15]	韩强, 许涛, 李涛, 贾欣, 孙昭琦, 白岩松. 稀土Ce对BT80s-5Cr油井管钢组织及第二相析出的影响[J]. 金属热处理, 2023, 48(8): 24-29.

Nb元素对汽车渗碳齿轮用20CrMnTi钢热处理过程中晶粒粗化的影响

Effect of Nb element on grain coarsening of automobile carburized gear steel 20CrMnTi during heat treatment

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价