深冷处理对X70管线钢组织与力学性能的影响

doi:10.13251/j.issn.0254-6051.2024.05.028

金属热处理 ›› 2024, Vol. 49 ›› Issue (5): 168-172.DOI: 10.13251/j.issn.0254-6051.2024.05.028

深冷处理对X70管线钢组织与力学性能的影响

朱艳强^1,2, 李永刚^1,2, 何琼^1,2, 刘哲兵^1,2

1.太原理工大学机械与运载工程学院, 山西太原 030024;
2.精密加工山西省重点实验室, 山西太原 030024

收稿日期:2023-11-14 修回日期:2024-04-03 出版日期:2024-05-25 发布日期:2024-06-28
通讯作者: 李永刚,副教授,博士,E-mail:liyonggang_tyut@126.com
作者简介:朱艳强(1997—),男,硕士研究生,主要研究方向为精密零件表面光整加工,E-mail:1848936515@qq.com。
基金资助:
国家自然科学基金(51705352);中国博士后科学基金(2018M641682)

Effect of cryogenic treatment on microstructure and mechanical properties of X70 pipeline steel

Zhu Yanqiang^1,2, Li Yonggang^1,2, He Qiong^1,2, Liu Zhebing^1,2

1. College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan Shanxi 030024, China;
2. Shanxi Province Key Laboratory of Precision Machining, Taiyuan Shanxi 030024, China

Received:2023-11-14 Revised:2024-04-03 Online:2024-05-25 Published:2024-06-28

摘要/Abstract

摘要： 利用光学显微镜、扫描电镜、显微硬度计、万能电子拉伸试验机等,研究了深冷处理、调质以及调质+深冷处理对X70管线钢显微组织及力学性能的影响。结果表明,未经处理X70管线钢组织为铁素体+珠光体;仅深冷处理后组织更加细小、均匀且珠光体含量减少,显微硬度提高了2.73%,抗拉强度提升9.58%,拉伸断口形貌为等轴韧窝,为韧性断裂特征;调质处理后X70管线钢组织为铁素体+回火索氏体+贝氏体,相较未处理试样,硬度提高了13.62%,抗拉强度提升5.64%,拉伸断口分布有韧窝及少量准解理形貌,其韧性变差;调质+深冷处理后组织为铁素体+回火索氏体+贝氏体,组织更加细小、均匀且铁素体含量变多,相较未处理试样,硬度提高了22.52%,抗拉强度提升16.76%,深冷处理改善了调质态试样的塑性,拉伸断口为韧性断裂特征。

关键词: X70管线钢, 调质, 深冷处理, 显微组织, 力学性能

Abstract: Effects of cryogenic treatment, quenching and tempering, and quenching and tempering+cryogenic treatment on microstructure and mechanical properties of the X70 pipeline steel were studied by means of optical microscope, scanning electron microscope, microhardness tester, and universal electronic tensile test machine. The results show that the microstructure of the X70 pipeline steel without treatment is ferrite+pearlite. After cryogenic treatment only, the microstructure is finer and more uniform, the content of pearlite decreases, the microhardness and tensile strength of the X70 pipeline steel increase respectively by 2.73% and 9.58%, and the tensile fracture morphology is equiaxed dimples, showing a ductile fracture characteristic. After quenching and tempering, the microstructure of the X70 pipeline steel is ferrite+tempered sorbite+bainite, the hardness and tensile strength increase by 13.62% and 5.64%, respectively, compared to that of the untreated specimen, and the tensile fracture is distributed with dimples and a small amount of quasi cleavage morphologies, showing a decrease in toughness. After quenching and tempering+cryogenic treatment, the microstructure of the X70 pipeline steel is ferrite+tempered sorbite+bainite, the microstructure is finer and more uniform, the ferrite content increases, the hardness and tensile strength increase by 22.52% and 16.76%, respectively, compared to that of the untreated specimen, and the cryogenic treatment improves the plasticity of the quenched and tempered specimen, thus the tensile fracture exhibits ductile fracture characteristics.

Key words: X70 pipeline steel, quenching and tempering, cryogenic treatment, microstructure, mechanical properties

中图分类号:

TG156

朱艳强, 李永刚, 何琼, 刘哲兵. 深冷处理对X70管线钢组织与力学性能的影响[J]. 金属热处理, 2024, 49(5): 168-172.

Zhu Yanqiang, Li Yonggang, He Qiong, Liu Zhebing. Effect of cryogenic treatment on microstructure and mechanical properties of X70 pipeline steel[J]. Heat Treatment of Metals, 2024, 49(5): 168-172.

参考文献

[1]姚婵, 陈健, 明洪亮, 等. 管线钢氢渗透行为的研究进展[J]. 中国腐蚀与防护学报, 2023, 43(2): 209-219.
Yao Chan, Chen Jian, Ming Hongliang, et al. Research progress on hydrogenpermeability behavior of pipeline steel[J]. Journal of Chinese Society for Corrosion and Protection, 2023, 43(2): 209-219.
[2]孙颖昊, 程玉峰. 高强管线钢焊缝区氢损伤研究与展望[J]. 石油管材与仪器, 2021, 7(6): 1-13.
Sun Yinghao, Cheng Yufeng. A review on hydrogen damage at welds of high strength steel pipelines[J]. Petroleum Tubular Goods and Instruments, 2021, 7(6): 1-13.
[3]滕彧, 陈伟聪, 王培森, 等. 不同热处理条件X70管线钢在海洋环境中的应力腐蚀行为[J]. 当代化工, 2020, 49(12): 2853-2857.
Teng Yu , Chen Weicong , Wang Peisen, et al. Behavior of stress corrosion of X70 pipeline steel under different heat treatment conditions in marine environment[J]. Contemporary Chemical Industry, 2020, 49(12): 2853-2857.
[4]Senthilkumar D. Influence of deep cryogenic treatment on hardness and toughness of En31 steel[J]. Advances in Materials and Processing Technologies, 2019, 5(1): 114-122.
[5]闫献国, 陈峙, 兰东生. 深冷处理工艺对丝锥寿命的影响[J]. 机电产品开发与创新, 2022, 35(1): 170-172, 175.
Yan Xianguo, Chen Zhi, Lan Dongsheng. The effect of the deep cooling process on tap life[J]. Development and Innovation of Machinery and Electrical Products, 2022, 35(1): 170-172, 175.
[6]Thakurai R, Patle H, Sunil B R, et al. Effect of cryogenic treatment duration on the microhardness and tribological behavior of 40CrMoV5 tool steel[J]. Materials Today: Proceedings, 2021, 38: 2140-2144.
[7]屈林, 王操, 屈玉石, 等. 深冷处理对FSW焊接件组织及力学性能的影响[J]. 铝加工, 2022(2): 28-30.
Qu Lin, Wang Cao, Qu Yushi, et al. Effect of cryogenic treatment on microstructure and mechanical properties of FSW welded parts[J]. Aluminium Fabrication, 2022(2): 28-30.
[8]Korade D, Ramana K V, Jagtap K. Wear and fatigue behaviour of deep cryogenically treated H21 tool steel[J]. Transactions of the Indian Institute of Metals, 2020, 73(4): 843-851.
[9]刘玉江, 王莎莎, 贾涵, 等. 含铁素体/珠光体带状组织管线钢热变形行为研究[J]. 钢管, 2021, 50(2): 30-33.
Liu Yujiang, Wang Shasha, Jia Han, et al. Research on thermal deformation behavior of pipeline steel with ferrite/pearlite banded structure[J]. Steel Pipe, 2021, 50(2): 30-33.
[10]陈鼎, 刘芳, 滕杰, 等. 深冷处理对低碳钢组织与性能的影响[J]. 金属热处理, 2008, 33(9): 66-69.
Chen Ding, Liu Fang, Teng Jie, et al. Effects of deep cryogenic treatment on microstructures of low carbon steels[J]. Heat Treatment of Metals, 2008, 33(9): 66-69.
[11]唐佳. 热处理工艺对X65钢在酸性环境中耐蚀性的影响[D]. 成都: 西南石油大学, 2018.
Tang Jia. Effect of heat treatment processes on the corrosion resistance of X65 steel in acidic environments[D]. Chengdu: Southwest Petroleum University, 2018.
[12]Li D, He W, Zhang X, et al. Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel[J]. Journal of Iron and Steel Research International, 2021, 28: 370-382.
[13]Senthilkumar D, Rajendran I, Pellizzari M, et al. Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel[J]. Journal of Materials Processing Technology, 2011, 211(3): 396-401.
[14]于庆波, 孙莹, 倪宏昕, 等. 不同类型的贝氏体组织对低碳钢力学性能的影响[J]. 机械工程学报, 2009, 45(12): 284-288.
Yu Qingbo, Sun Ying, Ni Hongxin, et al. Effect of different bainitic microstructures on the mechanical properties of low-carbon steel[J]. Journal of Mechanical Engineering, 2009, 45(12): 284-288.
[15]孔德军, 叶存冬, 郭卫. X80管线钢焊接接头拉伸断裂行为与断口形貌分析[J]. 建筑材料学报, 2015, 18(1): 139-144.
Kong Dejun, Ye Cundong, Guo Wei. Tensile fracture behaviors and fracture morphologies of X80 pipeline steel welded joint[J]. Journal of Building Materials, 2015, 18(1): 139-144.

深冷处理对X70管线钢组织与力学性能的影响

Effect of cryogenic treatment on microstructure and mechanical properties of X70 pipeline steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	何宗政, 吴名冬, 袁硕, 姚树伟, 肖代红, 黄兰萍, 刘文胜. Zn/Mg比对7075铝合金显微组织、力学性能和耐蚀性能的影响[J]. 金属热处理, 2024, 49(5): 1-9.
[2]	鲍峥, 程翔, 王若民, 缪春辉, 陈国宏, 汤文明. 不同服役期TP347HFG钢管显微组织与力学性能的对比[J]. 金属热处理, 2024, 49(5): 10-16.
[3]	杨希锐, 江宝世, 胡锋涛, 李艳军, 盛超杰, 王晨. 高温长期服役S30432钢管的组织与性能[J]. 金属热处理, 2024, 49(5): 17-21.
[4]	王书亮, 毛一点, 李奇霖, 周禄江, 西宇辰, 张华礼. V对富Fe非等原子比FeCrCoNi高熵合金组织及性能的影响[J]. 金属热处理, 2024, 49(5): 22-28.
[5]	王英虎, 王婀娜, 蔡晓文. 铜含量对303易切削钢中硫化物形貌及力学性能的影响[J]. 金属热处理, 2024, 49(5): 29-35.
[6]	梁祥, 高翔, 李云龙, 徐志锋, 张正, 闫利青, 余欢. 深冷处理对叠层穿刺C_f/Al基复合材料组织特征和拉伸性能的影响[J]. 金属热处理, 2024, 49(5): 74-80.
[7]	李波, 向伟, 张枫, 秦锋英, 袁武华. 预时效处理对亚稳态β钛合金TB18组织性能的影响[J]. 金属热处理, 2024, 49(5): 106-111.
[8]	王泽龙, 冯兆龙, 李伟, 孙思博. 冷塑性变形及退火工艺对Ti45Nb合金组织和性能的影响[J]. 金属热处理, 2024, 49(5): 112-117.
[9]	邢振强, 庞景宇, 张宏伟, 纪宇, 朱正旺, 张龙, 王爱民, 张海峰. 冷轧、退火和时效对Fe₅₀Ni₂₅Cr₁₅Al₁₀高熵合金组织和性能的影响[J]. 金属热处理, 2024, 49(5): 118-123.
[10]	张增光, 史吉鹏, 王新宇, 刘艳梅, 杨立新, 康冲, 刘刚. 退火温度对Ti60钛合金激光焊接接头组织与力学性能的影响[J]. 金属热处理, 2024, 49(5): 130-134.
[11]	石磊, 田鹏勇, 施莹, 白雪, 杨芳. 两相区退火对铁素体/贝氏体双相钢组织性能的影响[J]. 金属热处理, 2024, 49(5): 158-161.
[12]	蒲博闻, 刘玉婷, 王延荣, 刁占英, 何敬卫. 调质处理对34CrNiMo6钢连杆锻件组织与硬度的影响[J]. 金属热处理, 2024, 49(5): 173-178.
[13]	吴蔚, 陈嘉颖, 郭锐, 王茹, 袁悠悠, 邱铨强, 程翔翔, 巨佳. 汽车车身板用高强Al-Mg-Si-(Ag/Cu)合金的时效工艺[J]. 金属热处理, 2024, 49(5): 179-185.
[14]	赵忠超, 汲庆涛, 曹善鹏, 唐和壮, 李宾良, 牛博雅, 孙有政. 固溶处理对7175铝合金组织和力学性能的影响[J]. 金属热处理, 2024, 49(5): 186-192.
[15]	王利鹏, 葛君超, 代昆宏. 热处理工艺对低碳高铜HSLA钢组织与力学性能的影响[J]. 金属热处理, 2024, 49(5): 199-203.