V-Nb微合金化Q420B大规格角钢的连续冷却转变规律

doi:10.13251/j.issn.0254-6051.2024.07.018

金属热处理 ›› 2024, Vol. 49 ›› Issue (7): 121-127.DOI: 10.13251/j.issn.0254-6051.2024.07.018

V-Nb微合金化Q420B大规格角钢的连续冷却转变规律

黄剑涛¹, 张明赫¹, 冯运莉¹, 尹绍江², 陈春生², 王厚昕³

1.华北理工大学冶金与能源学院, 河北唐山 063210;
2.唐钢中厚板材有限公司, 河北唐山 063600;
3.中信金属宁波能源有限公司, 浙江宁波 315899

收稿日期:2024-01-22 修回日期:2024-04-19 出版日期:2024-07-25 发布日期:2024-08-29
通讯作者: 张明赫,副教授,博士,E-mail:mhzhangmse@163.com
作者简介:黄剑涛(2000—),男,硕士研究生,主要研究方向为高性能钢铁材料,E-mail:m17631962184@163.com。
基金资助:
国家自然科学基金(51901078,51974134);河北省自然科学基金(E2022209070);河北省中央引导地方科技发展资金(236Z1003G);河北省科技重大专项(21281008Z)

Continuous cooling transformation law of V-Nb microalloyed Q420B large size angle steel

Huang Jiantao¹, Zhang Minghe¹, Feng Yunli¹, Yin Shaojiang², Chen Chunsheng², Wang Houxin³

1. School of Metallurgy and Energy, North China University of Science and Technology, Tangshan Hebei 063210, China;
2. Tangshan Medium Thick Plate Co., Ltd., Tangshan Hebei 063600, China;
3. CITIC Metal Ningbo Energy Co., Ltd., Ningbo Zhejiang 315899, China

Received:2024-01-22 Revised:2024-04-19 Online:2024-07-25 Published:2024-08-29

摘要/Abstract

摘要： 利用热膨胀仪和Gleeble-3500热模拟试验机测试了V-Nb微合金化Q420B大规格角钢在未变形(静态)和变形(动态)条件下连续冷却转变行为,利用光学显微镜观察了试验钢连续冷却后的组织形貌,并绘制了试验钢的静态和动态CCT曲线。结果表明,试验钢动态CCT曲线相比静态CCT曲线向左上方移动,说明变形加快了试验钢相变速度并提高了试验钢的相变开始和相变结束温度。此外,变形扩大了试验钢珠光体相变区域的同时减小了贝氏体相变区域。静态和动态连续冷却转变过程中,随着冷却速度的提高,试验钢的组织从铁素体和珠光体逐步向着贝氏体和在更快冷速条件下形成的马氏体发生转变,试验钢硬度值逐渐升高。试验钢在奥氏体未再结晶区变形后得到的组织比未变形时得到的组织均匀细小。冷却速度提高可以获得更低的相变温度Ar₃和更细小的铁素体晶粒,与此同时贝氏体组织更加细小。

关键词: V-Nb微合金化, Q420B大规格角钢, 连续冷却转变, 静态CCT曲线, 动态CCT曲线

Abstract: Continuous cooling transformation behavior of V-Nb microalloyed Q420B large angle steel was tested under undeformed (static) and deformed (dynamic) conditions by using thermal dilatometer and Gleeble-3500 thermal simulation machine. Microstructure of the tested steel after continuous cooling was observed by using optical microscope, and the static and dynamic CCT curves of the tested steel were plotted. The results show that the dynamic CCT curve of the tested steel moves to the upper left compared to the static CCT curve, indicating that the deformation accelerates the phase transformation of the tested steel and increases the starting and ending temperatures of the phase transformation. In addition, the deformation expands the pearlite transformation zone of the tested steel and reduces the bainite transformation zone. During the process of static and dynamic continuous cooling transformation, as the cooling rate increases, the microstructure of the tested steel gradually transforms from ferrite and pearlite to bainite and martensite formed under faster cooling rate conditions, and the hardness value of the tested steel gradually increases. Microstructure obtained after deformation of the tested steel in the austenitic unrecrystallized zone is uniformly finer than that obtained without deformation. An increase in the cooling rate results in a lower phase transformation temperature Ar₃ and finer ferrite grains, while at the same time the bainite microstructure is finer.

Key words: V-Nb microalloying, Q420B large size angle steel, continuous cooling transformation, static CCT curve, dynamic CCT curve

中图分类号:

TG142.1

黄剑涛, 张明赫, 冯运莉, 尹绍江, 陈春生, 王厚昕. V-Nb微合金化Q420B大规格角钢的连续冷却转变规律[J]. 金属热处理, 2024, 49(7): 121-127.

Huang Jiantao, Zhang Minghe, Feng Yunli, Yin Shaojiang, Chen Chunsheng, Wang Houxin. Continuous cooling transformation law of V-Nb microalloyed Q420B large size angle steel[J]. Heat Treatment of Metals, 2024, 49(7): 121-127.

参考文献

[1]常建伟, 徐德录, 张磊, 等. 输电铁塔用钢及其焊接技术[J]. 热加工工艺, 2011, 40(15): 148-151.
Chang Jianwei, Xu Delu, Zhang Lei, et al. Characteristics and welding technology of steel used for transmission line tower[J]. Hot Working Technology, 2011, 40(15): 148-151.
[2]黄璜, 李清华, 孟宪乔, 等. Q420大规格角钢在±800 kV特高压杆塔中的应用[J]. 电力建设, 2010, 31(6): 65-69.
Huang Huang, Li Qinghua, Meng Xianqiao, et al. Application on Q420 large width angle steel in ±800 kV UHV transmission tower[J]. Electric Power Construction, 2010, 31(6): 65-69.
[3]冯运莉, 刘战英, 陈春生, 等. VN合金在大规格角钢生产中的应用研究[J]. 钢铁钒钛, 2004, 25(2): 40-43.
Feng Yunli, Liu Zhanying, Chen Chunsheng, et al. Application of VN alloy in production of large size angle steel[J]. Iron Steel Vanadium Titanium, 2004, 25(2): 40-43.
[4]冯运莉, 段宝美, 胡小明, 等. V-N微合金化Q420B大规格角钢连铸坯高温热塑性的研究[J]. 热加工工艺, 2014, 43(16): 57-61.
Feng Yunli, Duan Baomei, Hu Xiaoming, et al. Study on high-temperature thermal plasticity of V-N microalloying Q420B large width angle steel continuous cast slab[J]. Hot Working Technology, 2014, 43(16): 57-61.
[5]马壮, 侯振伟, 陈雪慧, 等. Nb对V-N微合金化钢高温热塑性的影响[J]. 钢铁研究学报, 2022, 34(10): 1177-1186.
Ma Zhuang, Hou Zhenwei, Chen Xuehui, et al. Effect of Nb on hot ductility of V-N microalloyed steel[J]. Journal of Iron and Steel Research, 2022, 34(10): 1177-1186.
[6]蒲春雷, 姜嫄, 闫洞旭, 等. Nb/V/Ti微合金化对20MnSi钢组织和力学性能影响[J]. 材料热处理学报, 2023, 44(7): 99-106.
Pu Chunlei, Jiang Yuan, Yan Dongxu, et al. Effect of Nb/V/Ti microalloying on microstructure and mechanical properties of 20MnSi steel[J]. Transactions of Materials and Heat Treatment, 2023, 44(7): 99-106.
[7]徐海峰, 李海, 李凤敏, 等. 新型槽帮钢的连续冷却转变曲线及微观组织[J]. 金属热处理, 2023, 48(6): 191-196.
Xu Haifeng, Li Hai, Li Fengmin, et al. Continuous cooling transformation curves and microstructure of new-type slot edge steel[J]. Heat Treatment of Metals, 2023, 48(6): 191-196.
[8]赵倩, 乔志霞, 董纪, 等. WB36CN1钢连续冷却转变产物分析[J]. 金属热处理, 2023, 48(7): 22-25.
Zhao Qian, Qiao Zhixia, Dong Ji, et al. Analysis of continuous cooling transformation products of WB36CN1 steel[J]. Heat Treatment of Metals, 2023, 48(7): 22-25.
[9]马启林, 刘刚, 郑健, 等. Nb-V复合微合金化高钢级管线钢的奥氏体连续冷却转变[J]. 金属热处理, 2022, 47(1): 13-18.
Ma Qilin, Liu Gang, Zheng Jian, et al. Continuous cooling transformation of austenite in Nb-V microalloyed high-grade pipeline steel[J]. Heat Treatment of Metals, 2022, 47(1): 13-18.
[10]阎勇, 李萌蘖, 卜恒勇, 等. S34MnV钢的连续冷却转变行为及相变动力学研究[J]. 材料导报, 2021, 35(20): 20129-20136.
Yan Yong, Li Mengnie, Bu Hengyong, et al. Continuous cooling transformation behavior and transformation kinetics of S34MnV steel[J]. Materials Reports, 2021, 35(20): 20129-20136.

[1]	陈作宁, 师仲然, 胡骞, 展之德, 罗小兵. 390 MPa级抗碰撞船体钢的奥氏体连续冷却转变[J]. 金属热处理, 2024, 49(7): 146-151.
[2]	王芝林, 高星, 蒋波, 王磊英, 赵海东, 吴瀚. Mn-Cr-V-S贝氏体非调质钢连续冷却转变与组织调控[J]. 金属热处理, 2023, 48(9): 191-196.
[3]	赵倩, 乔志霞, 董纪, 张亚然, 何彪, 钱阔. WB36CN1钢连续冷却转变产物分析[J]. 金属热处理, 2023, 48(7): 22-25.
[4]	谭会杰, 鲍小光, 吴忠旺, 王海燕. X80管线钢的过冷奥氏体转变规律和相变模型[J]. 金属热处理, 2023, 48(7): 61-65.
[5]	徐海峰, 李海, 李凤敏, 付胜敏, 明科宇, 郁言. 新型槽帮钢的连续冷却转变曲线及微观组织[J]. 金属热处理, 2023, 48(6): 191-196.
[6]	王瑞敏, 刘曼, 周剑华, 张琪, 苏雪, 徐光. R350HT钢轨钢的连续冷却转变曲线[J]. 金属热处理, 2022, 47(9): 153-157.
[7]	沈慧, 刘云鹏, 斯庭智. 4330M钢连续冷却过程中的组织转变特征[J]. 金属热处理, 2022, 47(7): 190-196.
[8]	吴轲源, 刘云鹏, 李孔斋, 徐良乐. 17-4PH不锈钢连续冷却转变及相变动力学[J]. 金属热处理, 2022, 47(6): 161-167.
[9]	庞庆海, 郎庆斌, 何春静, 王九花, 元亚莎. 5Cr2NiMoVSi模具钢的相变规律与力学性能[J]. 金属热处理, 2022, 47(3): 186-190.
[10]	马启林, 刘刚, 郑健, 阴树标, 李拔, 刘清友. Nb-V复合微合金化高钢级管线钢的奥氏体连续冷却转变[J]. 金属热处理, 2022, 47(1): 13-18.
[11]	陶素芬, 吴浩, 孙桂林, 陈龙, 陈波. Ni含量对EQ70海洋工程用钢CCT曲线的影响[J]. 金属热处理, 2022, 47(1): 100-105.
[12]	杨晓伟, 陈焕德, 周云, 张宇. 轧制工艺对V-Nb微合金化HRB600E钢筋组织及性能的影响[J]. 金属热处理, 2021, 46(8): 150-155.
[13]	霍喜伟. Cr对20MnSiV门架型钢动态CCT曲线和性能的影响[J]. 金属热处理, 2021, 46(7): 89-93.
[14]	霍建生, 阎冬. 700 MPa级高强度耐候钢过冷奥氏体连续冷却相变行为[J]. 金属热处理, 2021, 46(7): 94-97.
[15]	段贺, 单以银, 杨柯, 史显波, 严伟, 任毅. Mo含量对高等级管线钢相变行为及组织和性能的影响[J]. 金属热处理, 2021, 46(5): 1-8.

V-Nb微合金化Q420B大规格角钢的连续冷却转变规律

Continuous cooling transformation law of V-Nb microalloyed Q420B large size angle steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价