Corrosion behavior of AZ91 magnesium alloy for automobile engine

[1]

Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin. Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy [J]. Heat Treatment of Metals, 2022, 47(4): 10-16.

[2]

Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu. Precipitation behavior of σ phase in 2507 super duplex stainless steel [J]. Heat Treatment of Metals, 2022, 47(4): 108-115.

[3]

[4]

Chen Zhijie, Cui Tong. Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating [J]. Heat Treatment of Metals, 2022, 47(4): 213-218.

[5]

[6]

Luo Jiandong, Hu Yanhong, Lin Yuzhou. Application of low temperature nitriding process with double power supplies on 316 stainless steel [J]. Heat Treatment of Metals, 2022, 47(3): 7-13.

[7]

Chen Shanyong, Wang Kuaishe, Qiao Ke, Wang Wen. Effect of alkali heat treatment on corrosion resistance of friction stir processed AZ31 magnesium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 61-66.

[8]

[9]

Zhang Manxue, Jing Ran, Zhang Xiong, Zhang Qing, Wu Qian, Liu Yirou. Microstructure and corrosion resistance of as-cast Ti-20Zr-10Nb-xMo alloys [J]. Heat Treatment of Metals, 2022, 47(3): 147-150.

[10]

Min Xudong, Huang Yuanchun, Xiao Zhengbing, Liu Yu, Ren Xianwei, Zou Ti. Effect of pre-treatment on microstructure and intergranular corrosion behavior of Al-Mg-Si alloy for automobile [J]. Heat Treatment of Metals, 2022, 47(2): 78-85.

[11]

Xiang Qing, Jiang Xueting, Wu Liangyin, Ran Xiaoxiao, Liu Jing, Yang Feng. Microstructure, wear and corrosion resistant properties of TA2 titanium alloy after vacuum induction carbonitriding [J]. Heat Treatment of Metals, 2022, 47(2): 99-104.

[12]

Lin Hongchun, Ma Dandan, Yu Shengwang, Ma Yong, Zhou Bing, Gao Jie, Hei Hongjun, Xue Yanpeng. Preparation and corrosion resistance of highly adhesive superhydrophobic surface [J]. Heat Treatment of Metals, 2022, 47(2): 193-199.

[13]

Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia. Failure analysis of 20 steel equal-diameter tee [J]. Heat Treatment of Metals, 2022, 47(2): 262-266.

[14]

Wang Xin, Liang Xiaokai, Sun Xinjun. Corrosive wear resistance of low alloy martensitic steel containing antimony [J]. Heat Treatment of Metals, 2022, 47(1): 38-43.

[15]

Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng. Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface [J]. Heat Treatment of Metals, 2022, 47(1): 185-191.

PDF