| [1] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [2] |
Pang Qinghai, Lang Qingbin, He Chunjing, Wang Jiuhua, Yuan Yasha.
Phase transformation and mechanical properties of 5Cr2NiMoVSi die steel
[J]. Heat Treatment of Metals, 2022, 47(3): 186-190.
|
| [3] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [4] |
Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu.
Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni
[J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
|
| [5] |
Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin.
Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel
[J]. Heat Treatment of Metals, 2021, 46(9): 133-137.
|
| [6] |
Liu Jingbao, Tian Xiugang, Zhang Jie, Wei Huanjun, Yang Lina, Wang Zhao, Li Mengxing.
Microstructure and properties of a low-cost 800 MPa galvanized ultra-high strength dual-phase steel
[J]. Heat Treatment of Metals, 2021, 46(8): 73-76.
|
| [7] |
Ding Xuan, Gan Yurong, Zhang Chunju, Wang Liqiang, Yang Mingqiu, Li Hui.
Effect of intermediate annealing on microstructure and properties of 6016 aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 174-179.
|
| [8] |
Zhao Yanglei, Wang Lingshui, Qiu Shengwen, Dong Shengchao, Chen Liyang.
Change of microstructure and properties of 60Si2Mn spring steel during annealing
[J]. Heat Treatment of Metals, 2021, 46(8): 180-183.
|
| [9] |
Zhang Mei, Sun Guosheng, Qin Dongyang, Du Linxiu.
Behavior of martensite reverse transformation and austenite recrystallization of cold-rolled 304 stainless steel
[J]. Heat Treatment of Metals, 2021, 46(7): 51-55.
|
| [10] |
Shi Wei, E Xin, Wang Yanlong , Liu Limei, Yong Hongtuanhua, Zhang Ping.
Effect of low-temperature stress relief annealing on corrosion resistance of 316L stainless steel cold stamping corrugated plate for plate heat exchanger
[J]. Heat Treatment of Metals, 2021, 46(7): 140-143.
|
| [11] |
Li Canming.
Effect of quenching on microstructure and properties of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(6): 69-73.
|
| [12] |
Wang Zhao, Liu Jingbao, Du Mingshan, Sun Xu, Yang Lina, Li Mengxing, Yang Mingwei.
Effect of cold rolling reduction ratio on microstructure and properties of 1180 MPa grade complex phase steel
[J]. Heat Treatment of Metals, 2021, 46(6): 79-81.
|
| [13] |
Wang Cheng, Guo Hongli, Sun Jian, Li Defa.
Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel
[J]. Heat Treatment of Metals, 2021, 46(6): 111-115.
|
| [14] |
Li Canming.
Effect of tempering temperature on microstructure and properties of 1100 MPa steel
[J]. Heat Treatment of Metals, 2021, 46(4): 143-146.
|
| [15] |
Chen Zhuo, Wang Chengsi, Jin Bin, Liu Jingbao, Hao Lei, Kuang Shuang, Wang Jinrong.
Multiple regulation on mechanical properties of 980 MPa cold-rolled multi-phase steel
[J]. Heat Treatment of Metals, 2021, 46(4): 157-160.
|
