| [1] |
Wang Yujing, Wu Guangliang.
Prediction of heat treatment parameters and thermophysical properties of Q1100 high strength steel for construction machinery
[J]. Heat Treatment of Metals, 2021, 46(6): 172-176.
|
| [2] |
Yan Chunlian, Ju Xinhua, Yao Wugang, Jia Huiping, Wen Juan.
Determination of decarburization depth of steels by EPMA mapping analysis method
[J]. Heat Treatment of Metals, 2021, 46(5): 242-247.
|
| [3] |
Huang Xin, Zhou Jiguang, Fang Zhixiao, Wu Wei, Wen Yonghong.
Fracture cause analysis of 30CrMnSiA steel bolt for motor fixing
[J]. Heat Treatment of Metals, 2021, 46(5): 253-258.
|
| [4] |
Zhu Ke, Li Qiang, Zeng Jianmin, Zhao Siyong, Huang Zhaomin, Hu Yongmei.
Decarburization behavior of ZGMn13Cr2 steel during water toughening treatment
[J]. Heat Treatment of Metals, 2021, 46(4): 205-209.
|
| [5] |
Chen Bo, Wei Huanjun, Geng Zhiyu, Hua Yongxing, Zhang Jiguo, Xue Liqiang, Bi Yanlei.
Analysis on factors affecting decarburization of hot forming steel
[J]. Heat Treatment of Metals, 2021, 46(2): 161-167.
|
| [6] |
Du Peixuan1,2, Liang Yilong1,2, Lei Lei1,2, Jiang Yun1,2,Yang Ming1,2.
Failure analysis of HXD3B primary spring used in locomotive
[J]. HTM, 2016, 41(8): 189-192.
|
| [7] |
Kong Dequn1,2, Liu Qingsuo1, Ren Zheng2, Liu Zhihao3.
Oxidation analysis of carburized and hardened 18CrNiMo7-6 gear shaft
[J]. HTM, 2016, 41(7): 182-186.
|
| [8] |
Huang Yuanchun1,2,3，Yang Chuge1,2，Liu Yu3，Liu Xiang3，Li Yin3.
Homogenization heat treatment of 2219 aluminum alloy ingots
[J]. HTM, 2016, 41(12): 92-97.
|
| [9] |
Wang Wei1, Wang Zhiwu2, Li Wensheng1, Tian Jing2, Zhong Wanli1, Song Tao2, Lin Jiedong1.
Thermodynamic equilibrium phases of TP347H steel with different contents of Cr and Ni
[J]. HTM, 2016, 41(10): 99-101.
|
| [10] |
Song Jinying, Qi Xiangyu, Chen Liansheng, Tian Yaqiang, Zhang Jianyang.
Cause analysis of fractured40Mn steel chain and optimizing counter measures
[J]. HTM, 2015, 40(9): 209-214.
|
| [11] |
Li Fangpo1, 2, Wang Yong1.
Effect of surface decarburization on S135 drill pipe’s service property
[J]. HTM, 2015, 40(7): 164-167.
|
| [12] |
Zhang Liang，Luo Jinheng，Li Jinfeng，Dong Baosheng.
Failure analysis of a leak flange
[J]. HTM, 2015, 40(4): 201-204.
|
| [13] |
Zhang Xinming1, Feng Jijun1, Lu Liulin1, Wu Yang2, Guo Wenfang1, Liu Sheng1, Zhao Jiaqi1.
Leaf spring fracture analysis of skylight spring clip for automobile
[J]. HTM, 2015, 40(2): 204-208.
|
| [14] |
Ge Shaofei, Wu Juhuan, Zhao Ping.
Analysis of surface peeling of 490CL car wheel steel
[J]. HTM, 2014, 39(7): 173-177.
|
| [15] |
Jin Linkui, Zhao Janguo, Yuan Yuguang.
Failure analysis of heat treatment cracking of large steel cast roll sleeve
[J]. HTM, 2014, 39(7): 178-181.
|
