| [1] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [2] |
Pang Qinghai, Lang Qingbin, He Chunjing, Wang Jiuhua, Yuan Yasha.
Phase transformation and mechanical properties of 5Cr2NiMoVSi die steel
[J]. Heat Treatment of Metals, 2022, 47(3): 186-190.
|
| [3] |
Yang Yuchuan, Li Wei, Xiong Yong.
Analysis of fracture cause of 1Cr17Ni2 steel small shaft of control box
[J]. Heat Treatment of Metals, 2022, 47(3): 261-265.
|
| [4] |
Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu.
Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni
[J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
|
| [5] |
Deng Biao, Chen Peng, Wang Guodong.
Effect of tempering temperature on microstructure and properties of secondary hardening martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(9): 65-71.
|
| [6] |
Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin.
Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel
[J]. Heat Treatment of Metals, 2021, 46(9): 133-137.
|
| [7] |
Liu Jingbao, Tian Xiugang, Zhang Jie, Wei Huanjun, Yang Lina, Wang Zhao, Li Mengxing.
Microstructure and properties of a low-cost 800 MPa galvanized ultra-high strength dual-phase steel
[J]. Heat Treatment of Metals, 2021, 46(8): 73-76.
|
| [8] |
Zhao Yanglei, Wang Lingshui, Qiu Shengwen, Dong Shengchao, Chen Liyang.
Change of microstructure and properties of 60Si2Mn spring steel during annealing
[J]. Heat Treatment of Metals, 2021, 46(8): 180-183.
|
| [9] |
Zhang Mei, Sun Guosheng, Qin Dongyang, Du Linxiu.
Behavior of martensite reverse transformation and austenite recrystallization of cold-rolled 304 stainless steel
[J]. Heat Treatment of Metals, 2021, 46(7): 51-55.
|
| [10] |
Shi Wei, E Xin, Wang Yanlong , Liu Limei, Yong Hongtuanhua, Zhang Ping.
Effect of low-temperature stress relief annealing on corrosion resistance of 316L stainless steel cold stamping corrugated plate for plate heat exchanger
[J]. Heat Treatment of Metals, 2021, 46(7): 140-143.
|
| [11] |
Li Canming.
Effect of quenching on microstructure and properties of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(6): 69-73.
|
| [12] |
Wang Cheng, Guo Hongli, Sun Jian, Li Defa.
Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel
[J]. Heat Treatment of Metals, 2021, 46(6): 111-115.
|
| [13] |
Pan Hongji, Luo Defu, Chen Shengyi.
Effect of nitride carbonize and oxidize multi-treatment (QPQ) on microstructure and properties of MPS700A steel
[J]. Heat Treatment of Metals, 2021, 46(4): 83-87.
|
| [14] |
Li Canming.
Effect of tempering temperature on microstructure and properties of 1100 MPa steel
[J]. Heat Treatment of Metals, 2021, 46(4): 143-146.
|
| [15] |
Ji Xianbin, Li Zhaoguo, Wei Haixia, Qian Zhangxin.
Effects of quenching temperature and nitrogen content on microstructure and properties of martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(3): 130-134.
|
