Design method of hardening depth for carburized gear

[1]

Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin. Microstructure and properties of C69 gear steel for aviation after high temperature carburizing [J]. Heat Treatment of Metals, 2022, 47(4): 219-225.

[2]

Zhang Ning, Gao Xing, Wang Zhilin, Jiang Bo, Liu Yazheng. Analysis of abnormal microstructure and properties of 18CrNiMo7-6 steel gear [J]. Heat Treatment of Metals, 2022, 47(4): 268-273.

[3]

Lu Jinsheng, Zhang Heng, Xu Hongxiang, Guo Shirui. Ion nitriding technology of inner gear ring of 6.5 MW nuclear power pump [J]. Heat Treatment of Metals, 2022, 47(3): 97-101.

[4]

Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang. Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel [J]. Heat Treatment of Metals, 2022, 47(3): 113-118.

[5]

Zhao Yiqi, Nie Xiaolong, Zhao Sixin, Gao Jiaqiang, Liu Xinkuan. Predicting model of gear steel hardenability based on extreme learning machine [J]. Heat Treatment of Metals, 2022, 47(3): 227-233.

[6]

Hu Fangzhong, Yang Shaopeng, Jin Guozhong, Hu Naiyue, Wang Kaizhong, Yang Zhiqiang, Chen Shijie. Effect of quenching temperature on microstructure evolution and mechanical properties of Nb microalloyed gear steel 18CrNiMo7-6 [J]. Heat Treatment of Metals, 2022, 47(2): 105-111.

[7]

[8]

Dai Yanzhang, Han Shun, Li Yong, Zhou Min, Wang Chunxu. Effect of tempering temperature on microstructure and properties of a new generation transmission gear steel C61 [J]. Heat Treatment of Metals, 2022, 47(1): 49-55.

[9]

Xu Hongxiang, Wang Hongwei, Zhang Heng, Wang Jun, Zhao Shaofu. Crack analysis of case-hardened 20Cr2Ni4 steel gear after assembly [J]. Heat Treatment of Metals, 2021, 46(8): 250-253.

[10]

Zhao Shaofu, Xu Hongxiang, Wang Hongwei, Guo Jingqiang, Li Ziyan, Chen Yan. Experimental study on improving carburizing and quenching hardness of gear made of 20Cr2Ni4A steel [J]. Heat Treatment of Metals, 2021, 46(7): 120-125.

[11]

Liang Xiaodong, Ju Zhe, Liu Ji, Wang Chenchong, Wang Xu. Effect of quenching temperature on microstructure and mechanical properties of gear steel C64 [J]. Heat Treatment of Metals, 2021, 46(4): 88-94.

[12]

Yan Youzeng, Zhang Hao, Cao Qi, Meng Gaoqiang, Xia Guofeng, Xu Shuang. Causes analysis of quenching cracking of inner hole of first class planet carrier [J]. Heat Treatment of Metals, 2021, 46(4): 236-238.

[13]

Luo Ping, Li Xianjun, Zhang Wenliang, Wang Jin, Wu Xiaolin, Shang Yong, Shi Yuezhang. Development of walking beam production line for isothermal normalizing of gear shaft blanks [J]. Heat Treatment of Metals, 2021, 46(4): 243-246.

[14]

[15]

Cheng Yuan, Hu Fangzhong, Hu Naiyue, Wang Kaizhong, Wang Lianglin, Jin Guozhong, Hao Zhenyu. Failure analysis of driving bevel gear of heavy truck rear axle [J]. Heat Treatment of Metals, 2021, 46(2): 218-222.

PDF