| [1] |
Yang Yuchuan, Li Wei, Xiong Yong.
Analysis of fracture cause of 1Cr17Ni2 steel small shaft of control box
[J]. Heat Treatment of Metals, 2022, 47(3): 261-265.
|
| [2] |
Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu.
Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni
[J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
|
| [3] |
Gao Yongwang, Kong Xiangling, Li Pengming, Liu Yue.
Effect of discharge temperature during annealing at 750 ℃ on microstructure and properties of QT450-10 nodular cast iron
[J]. Heat Treatment of Metals, 2022, 47(1): 261-265.
|
| [4] |
Meng Yuerui, Zhao Xianping, Zhou Bowen.
Cause analysis of r value decreasing of low carbon aluminum-killed steel sheet developed based on ferrite rolling process
[J]. Heat Treatment of Metals, 2021, 46(9): 211-215.
|
| [5] |
Li Rongzhi, Yang Yanfang, Zhang Quanxin.
Solution treated microstructure and properties of duplex stainless steel 1Cr18Ni11Si4AlTi
[J]. Heat Treatment of Metals, 2021, 46(7): 43-46.
|
| [6] |
Huo Jiansheng, Yan Dong.
Continuous cooling transformation behavior of undercooled austenite of 700 MPa high strength weathering resistance steel
[J]. Heat Treatment of Metals, 2021, 46(7): 94-97.
|
| [7] |
Yu Yinjun, Zhao Shiyu, Zhang Ke, Li Zhaodong, Chen Zihao, Zhang Qing, Wang Xinzhi, Qian Jianqing.
Effect of isothermal cooling time on microstructure transformation and hardness of a Ti-V-Mo microalloyed steel
[J]. Heat Treatment of Metals, 2021, 46(6): 95-101.
|
| [8] |
Duan He, Shan Yiyin, Yang Ke, Shi Xianbo, Yan Wei, Ren Yi.
Effects of Mo content on phase transformation behavior, microstructure and mechanical properties of high grade pipeline steel
[J]. Heat Treatment of Metals, 2021, 46(5): 1-8.
|
| [9] |
Zhou Bowen, Fan Lei, Li Xian, Ye Jiang, Liu Guangquan, Feng Xinyuan.
Effect of ferrite rolling on microstructure and properties of steel plate cold-rolled common
[J]. Heat Treatment of Metals, 2021, 46(5): 138-142.
|
| [10] |
Zhao Ting, Sun Jiazhen, Jia Xin, Guo Kai, Wang Tiansheng.
Influence of solution temperature on corrosion resistance of Fe-Mn-Al-C ferrite based light weight steel
[J]. Heat Treatment of Metals, 2021, 46(4): 105-111.
|
| [11] |
Weng Jianyin, Peng Wei, Ning Xiaozhi, Liu Tengshi, Bao Xianyong, Li Bei, Dong Han.
Effect of nitrogen content on phase transformation of nickel-free austenitic stainless steel containing Mo
[J]. Heat Treatment of Metals, 2021, 46(2): 8-13.
|
| [12] |
Yuan Rui, Pan Zhongde, Wu Huibin.
Effect of normalizing process on microstructure and properties of 420 MPa grade steel plate for offshore wind power
[J]. Heat Treatment of Metals, 2021, 46(10): 112-116.
|
| [13] |
Liu Feng, Pang Yuhua, Luo Yuan, Sun Qi, Wang Hai, Liu Dong.
Heat treatment process based on 07MnNiMoDR steel heat treatment process window
[J]. Heat Treatment of Metals, 2021, 46(10): 137-143.
|
| [14] |
Shi Xianbo, Yin Peihua, Yan Wei, Shan Yiyin, Ren Yi.
Effect of bainite content on mechanical properties of ferrite/bainite(F/B) dual phase pipeline steel
[J]. Heat Treatment of Metals, 2021, 46(1): 187-192.
|
| [15] |
Pang Zhuorui, Fu Liming, Suo Zhongyuan, Shan Aidang.
Effect of intercritical rolling on microstructure and mechanical properties of ferrite/martensite dual-phase steel
[J]. Heat Treatment of Metals, 2020, 45(9): 37-40.
|
