| [1] |
Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng.
Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing
[J]. Heat Treatment of Metals, 2022, 47(4): 245-250.
|
| [2] |
Luo Jiandong, Hu Yanhong, Lin Yuzhou.
Application of low temperature nitriding process with double power supplies on 316 stainless steel
[J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
|
| [3] |
Liang Huainan, Liu Zhiqi, Chen Dongliang, Song Jianli, Lin Naiming.
Analysis of EDM process parameters on imprint mould surface texture
[J]. Heat Treatment of Metals, 2022, 47(3): 20-27.
|
| [4] |
Shi Haifang, Li Qiang.
Effect of carbon content on microstructure and properties of Al0.5Co0.5NiCrFe high-entropy alloy coating
[J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
|
| [5] |
Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang.
Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel
[J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
|
| [6] |
Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin.
Research progress of laser modification technology for titanium alloy surface
[J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
|
| [7] |
Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li.
Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel
[J]. Heat Treatment of Metals, 2022, 47(2): 178-182.
|
| [8] |
Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei.
Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding
[J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
|
| [9] |
Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng.
Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface
[J]. Heat Treatment of Metals, 2022, 47(1): 185-191.
|
| [10] |
Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi.
Preparation technology of laser clad Fe-based coating for shield sealing runway repair
[J]. Heat Treatment of Metals, 2022, 47(1): 202-211.
|
| [11] |
Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun.
Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer
[J]. Heat Treatment of Metals, 2022, 47(1): 276-280.
|
| [12] |
Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li.
Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel
[J]. Heat Treatment of Metals, 2021, 46(9): 223-228.
|
| [13] |
Gong Yuling, Wu Meiping, Cui Chen, Miao Xiaojin.
Effect of overlap rate on microstructure and properties of Ni60A clad coating on TC4 titanium alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 229-233.
|
| [14] |
Miao Xiaojin, Xia Sihai,Wu Meiping, Yu Jinghu, Zhao Zishuo, Cui Chen, Zhang Chunlei.
Effect of adding CeO2 on properties of Al-Ti laser clad coating on aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 234-240.
|
| [15] |
Lin Zhiqing, Zhang Fucheng, Ma Hua, Wang Lin, Chen Chen, Xu Ming.
Effect of FW&TMCP treatment on wear resistance of as-cast high manganese steel frog
[J]. Heat Treatment of Metals, 2021, 46(8): 92-98.
|
