Room temperature deformation behavior of Mg-Al-Sn alloy for automobile

[1]

Lian Yibo, Yang Chunlei, Wang Guodong, Song Wei. Effect of solution treatment on microstructure of GH4080A superalloy [J]. Heat Treatment of Metals, 2022, 47(4): 46-52.

[2]

Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li. Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel [J]. Heat Treatment of Metals, 2022, 47(4): 116-121.

[3]

Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng. Effect of magnetic field pre-annealing on microstructure and texture of CGO steel [J]. Heat Treatment of Metals, 2022, 47(4): 128-132.

[4]

Yang Jie, Ren Huiping, Liu Zongchang. Kinetics of austenite grain growth of 15Cr12CuSiMoMn steel [J]. Heat Treatment of Metals, 2022, 47(2): 53-58.

[5]

Chen Jianwen, Yuan Wufeng, Jiang Yizhou, Zhang Chen, Yi Huaqing, Gao Yiqiang. Effect of forging heating temperature on austenite grain growth and mechanical properties of 20Cr2Ni4A steel [J]. Heat Treatment of Metals, 2022, 47(2): 112-118.

[6]

Dai Yongjuan, Wu Xiangxiang, Li Jiakun, Guo Dong, Wang Bo. Effect of annealing temperature on microstructure and properties of Fe-24.38Mn-0.44C TWIP steel [J]. Heat Treatment of Metals, 2022, 47(2): 146-152.

[7]

Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren. Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy [J]. Heat Treatment of Metals, 2022, 47(1): 130-134.

[8]

Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe. Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate [J]. Heat Treatment of Metals, 2022, 47(1): 135-141.

[9]

[10]

[11]

Tian Wei, Chang Song, Zhou Changshen, Zhang Wendi, Feng Zhihao, Sun Xinyang, Su Ru. Microstructure transformation and metallographic analysis of Ni-based wrought superalloy during heat treatment [J]. Heat Treatment of Metals, 2021, 46(8): 30-35.

[12]

Wang Haibo, Xu Zhenlin, Hu Xuewen, Peng Huan. Hydrogen embrittlement susceptibility of a hot-rolled ultra-high strength complex phase steel [J]. Heat Treatment of Metals, 2021, 46(8): 51-55.

[13]

Chen Jiping, Zhang Le, Xing Xianqiang, Sun Guoqing, Qian Jianqing. Effect of oxidation time on evaluation of austenite grain size of low alloy spring steel [J]. Heat Treatment of Metals, 2021, 46(8): 241-245.

[14]

Pan Longbo, Chu Tao, Zhang Shuo, Jiang Ji, Cheng Caijin, Xie Qingzhong, Xing Xueqiang, Si Tingzhi. Dynamic recrystallization behaviors of 30CrNi3MoV steel and its mathematical models [J]. Heat Treatment of Metals, 2021, 46(7): 23-30.

[15]

Wang Cheng, Guo Hongli, Sun Jian, Li Defa. Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel [J]. Heat Treatment of Metals, 2021, 46(6): 111-115.

PDF