| [1] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [2] |
Gao Yongwang, Kong Xiangling, Li Pengming, Liu Yue.
Effect of discharge temperature during annealing at 750 ℃ on microstructure and properties of QT450-10 nodular cast iron
[J]. Heat Treatment of Metals, 2022, 47(1): 261-265.
|
| [3] |
Ding Xuan, Gan Yurong, Zhang Chunju, Wang Liqiang, Yang Mingqiu, Li Hui.
Effect of intermediate annealing on microstructure and properties of 6016 aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 174-179.
|
| [4] |
Wang Zhao, Liu Jingbao, Du Mingshan, Sun Xu, Yang Lina, Li Mengxing, Yang Mingwei.
Effect of cold rolling reduction ratio on microstructure and properties of 1180 MPa grade complex phase steel
[J]. Heat Treatment of Metals, 2021, 46(6): 79-81.
|
| [5] |
Chen Zhuo, Wang Chengsi, Jin Bin, Liu Jingbao, Hao Lei, Kuang Shuang, Wang Jinrong.
Multiple regulation on mechanical properties of 980 MPa cold-rolled multi-phase steel
[J]. Heat Treatment of Metals, 2021, 46(4): 157-160.
|
| [6] |
Li Zhiming, Li Chunming, Qin Fenghua, Hu Yinping.
Heating process analysis and system design of continuous annealing furnace for cold-rolled stainless steel
[J]. Heat Treatment of Metals, 2021, 46(3): 191-195.
|
| [7] |
Yang Peiyuan, Huo Qinghui, Chen Zhuo, Zhou Wei, Wang Hongbin.
Effect of dew point on surface oxidation behavior of DP590 dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(11): 97-102.
|
| [8] |
Wang Keqiang, Liu Rendong, Guo Jinyu, Fu Wei, Huang Qiuju, Sun Rongsheng.
Development of cold-rolled 800 MPa grade high strength low alloy steel for automobile
[J]. Heat Treatment of Metals, 2021, 46(1): 120-124.
|
| [9] |
Yang Yuanyuan, Dong Lili, Liang Shiyin.
Continuous annealing process of cold rolled high strength low alloy HC420LA
[J]. Heat Treatment of Metals, 2020, 45(8): 166-169.
|
| [10] |
Chen Zhuo, Jin Bin, Wang Chengsi, Liu Jingbao, Kuang Shuang, Liu Liping, Wang Zhao, Li Mengxing, Yang Mingwei, Wang Jinrong.
Optimization of heat treatment process of 980 MPa cold-rolling dual phase steel
[J]. Heat Treatment of Metals, 2020, 45(7): 86-89.
|
| [11] |
Zhao Haiqiang, Chen Hongye.
Formation mechanism and preventive measures of pitting defects on surface of cold rolled continuous annealing strip steel
[J]. Heat Treatment of Metals, 2020, 45(6): 236-238.
|
| [12] |
Liu Jingbao, Zhang Hongbo, Geng Zhiyu, Wei Huanjun.
Microstructure and properties of continuous annealed DP980 high strength steel
[J]. HTM, 2020, 45(2): 42-45.
|
| [13] |
Ren Zhiheng, Ren Huiping, Jin Zili, Li Wei.
Effect of continuous annealing on microstructure and properties of 440 MPa grade high strength IF steel containing lanthanum
[J]. HTM, 2020, 45(2): 76-80.
|
| [14] |
Zhou Bowen, Jiang Cailing, Fan Lei, Zhou Hua, Gao Yuan, Li Yu'nan, Ye Jiang.
Effect of continuous annealing slow cooling outlet temperature on yield strength of SPCC cold rolled sheet
[J]. HTM, 2020, 45(2): 129-133.
|
| [15] |
Wang Quan1，Wu Pengxiang1, 2，Sun Tingting1 .
Effect of tempering technology on microstructure and mechanical properties of ultra-low carbon alloy steel
[J]. HTM, 2017, 42(4): 91-94.
|
