| [1] |
Wu Hui, Lin Shengyao, Li Xinkai, Gong Yuhui, Wei Deqiang.
Effect of induction hardening on microstructure and properties of 42CrMo steel crankshaft connecting rod journal
[J]. Heat Treatment of Metals, 2022, 47(2): 119-124.
|
| [2] |
Wang Lei, Ma Lu, Yang Bo, Zhang Kai, Song Yang, Wang Ye.
Cause analysis of abnormal microstructure of nodular cast iron parts after high frequency induction quenching
[J]. Heat Treatment of Metals, 2021, 46(6): 231-235.
|
| [3] |
Mi Pei, Sun Yongpeng, Zhang Yong.
Causes and improvement methods of induction quenching cracks in mining toothed rail
[J]. Heat Treatment of Metals, 2021, 46(6): 250-252.
|
| [4] |
He Jianqun, Wu Chengwu, Wang Jingwen, Wang Wentao, Liu Zhiwei, Han Jingwei, Yin Ziqiang, Cheng Wei.
Laser cladding remanufacturing technology of 12CrNi3A steel camshaft
[J]. Heat Treatment of Metals, 2021, 46(2): 200-203.
|
| [5] |
Cheng Yi, Xu Jinhui, Feng Qingsong, Zhang Bin, Zou Xiaokui, Liu Changyu.
Numerical simulation of induction hardening of 50AT switch rail
[J]. Heat Treatment of Metals, 2020, 45(5): 199-205.
|
| [6] |
Gao Yu, Gao Xingwang, Zhang Genyuan.
Prediction on microstructure, hardness and process parameter optimization in continuous induction hardening of stepped shaft
[J]. Heat Treatment of Metals, 2020, 45(5): 215-220.
|
| [7] |
Yang Jing, Wang Yongkun, Liu Gaosong, Ran Qiyan, Yang Huan, Shang Rongkai.
Development of heat treatment process of camshaft for a type of intelligent diesel engine
[J]. Heat Treatment of Metals, 2020, 45(10): 85-89.
|
| [8] |
Zhang Dawei, Gao Fan, Lu Wuqiong, Ji Ni.
Induction hardening for forming heel-end of 60AT1-U75V steel rail
[J]. HTM, 2016, 41(2): 176-180.
|
| [9] |
Chen Liang.
Countermeasures for sharp corner cracking of workpiece during induction hardening
[J]. HTM, 2016, 41(11): 164-165.
|
| [10] |
Jiao Li, Ge Baohong, Zhang Yanming, Xu Xiangyang, Sun Sidong.
Failure analysis on surface wear of 20CrMnTi steel camshaft
[J]. HTM, 2015, 40(9): 221-224.
|
| [11] |
Chai Xiyang, Chai Feng, Su Hang, Liang Fengrui.
Effects of tempering process on microstructure and mechanical properties of induction hardening 10CrNi3MoV bulb flat steel
[J]. HTM, 2015, 40(3): 77-81.
|
| [12] |
.
Strengthening techniques and cost reduction ways for forged steel crankshaft
[J]. HTM, 2014, 39(5): 107-111.
|
| [13] |
Yan Ye, Wang Qian, Li Bo, Li Baomin, Dong Qingxin, Li Musen.
Processing quality analysis of the surface induction quenched domestic 55 steel and Japanese S55C steel screw polished rods
[J]. HTM, 2014, 39(4): 37-40.
|
