Choice of induction quenching frequency

[1]

Chen Qiang, Chen Linfang, Yang Minghua. High temperature carburizing process of 18CrNiMo7-6 steel in controlled atmosphere [J]. Heat Treatment of Metals, 2022, 47(4): 231-239.

[2]

Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei. Effect of quenching temperature on microstructure and properties of a low cobalt secondary hardening steel [J]. Heat Treatment of Metals, 2022, 47(3): 92-96.

[3]

Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo. Effects of Si content and quenching temperature on microstructure and properties of Q&P steel [J]. Heat Treatment of Metals, 2022, 47(3): 130-135.

[4]

Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu. Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni [J]. Heat Treatment of Metals, 2022, 47(2): 159-163.

[5]

Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun. Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer [J]. Heat Treatment of Metals, 2022, 47(1): 276-280.

[6]

Jiao Yongxiang, Deng Dewei, Sun Qi, Li Tianshu, Yang Shuhua, Zhang Yong, Ma Yushan. Influence of process parameter on laser quenching effect of 42CrMo steel [J]. Heat Treatment of Metals, 2021, 46(11): 90-96.

[7]

Xia Xiaoyu, Xiao Jinya, Wei Hanwei, Wang Shen. Microstructure transformation of door impact beam on induction hardening [J]. Heat Treatment of Metals, 2021, 46(10): 212-217.

[8]

[9]

Li Yong, Zhou Xinyu. Fault mode and fault tree analysis of WZC double chamber vacuum furnace system [J]. Heat Treatment of Metals, 2021, 46(10): 248-251.

[10]

Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin. Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel [J]. Heat Treatment of Metals, 2021, 46(9): 133-137.

[11]

Xu Qihao,Yang Lilin, Xia Ming, Qin Chen, Geng Zhenyue, Jiang Yajun, Zhao Liping. Failure analysis of 38CrMoAlA steel driveshaft [J]. Heat Treatment of Metals, 2021, 46(9): 268-272.

[12]

Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian. Numerical simulation and experimental verification of induction hardening of wind power inner gear ring [J]. Heat Treatment of Metals, 2021, 46(9): 273-278.

[13]

He Li. Vacuum heat treatment of 0Cr17Ni4Cu4Nb stainless steel base [J]. Heat Treatment of Metals, 2021, 46(8): 189-191.

[14]

Wang Cheng, Guo Hongli, Sun Jian, Li Defa. Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel [J]. Heat Treatment of Metals, 2021, 46(6): 111-115.

[15]

Wang Lei, Ma Lu, Yang Bo, Zhang Kai, Song Yang, Wang Ye. Cause analysis of abnormal microstructure of nodular cast iron parts after high frequency induction quenching [J]. Heat Treatment of Metals, 2021, 46(6): 231-235.

PDF