| [1] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [2] |
Gao Jie, He Chengxu, Song Wenle, Yang Fuyao, Liu Yang.
Effects of longitudinal magnetic annealing and tensile stress on magnetic characteristics and iron loss of 1K101 amorphous alloy ribbon
[J]. Heat Treatment of Metals, 2022, 47(3): 39-43.
|
| [3] |
Yu Shilun, Zhang Xiaojun, Kong Bin, Liu Zhengqiao, Yu Wei, Jiang Mengling.
Effect of annealing process on mechanical anisotropy of cold rolled commercial pure titanium coil
[J]. Heat Treatment of Metals, 2022, 47(3): 82-87.
|
| [4] |
Gai Miaomiao, Yang Juan, Zheng Xiping.
Heat treatment process for improving warpage distortion of 35CrMnSi steel disc
[J]. Heat Treatment of Metals, 2022, 47(1): 281-283.
|
| [5] |
Li Yahong, Qi Xiaowei, Wang Xipeng, He Fang.
Cause analysis on low plasticity of annealed 2A12 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 290-294.
|
| [6] |
Li Mengge, Cheng Juqiang, Yin Sibo.
Microstructure and properties of bainitic non-quenched and tempered steel with different section size
[J]. Heat Treatment of Metals, 2021, 46(8): 65-69.
|
| [7] |
Huo Xiwei.
Effect of Cr on dynamic CCT curves and properties of 20MnSiV gantry steel
[J]. Heat Treatment of Metals, 2021, 46(7): 89-93.
|
| [8] |
Liu Jizhao, Liu Wei, Yuan Haodeng, Wu Yuanzhi, Ye Tuo, Liu Wei, Deng Bin.
Effects of solution and aging treatment on mechanical properties and microstructure evolution of as-extruded 6082 aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(6): 82-87.
|
| [9] |
Yan Chaohui, Wang Youhua, Liu Chengcheng, Wu Shipu.
Influence of transverse flux induction heating excitation parameters on steel strip temperature and heater optimization
[J]. Heat Treatment of Metals, 2021, 46(5): 87-94.
|
| [10] |
Li Haoran, Li Zhanqi, Wang Jiayi, Ye Zhihao, Li Jinfeng, Hu Xiaoqing.
Effect of aging on tensile properties and intergranular corrosion sensitivity of 2050 Al-Li alloy
[J]. Heat Treatment of Metals, 2021, 46(5): 150-155.
|
| [11] |
Huang Xin, Zhou Jiguang, Fang Zhixiao, Wu Wei, Wen Yonghong.
Fracture cause analysis of 30CrMnSiA steel bolt for motor fixing
[J]. Heat Treatment of Metals, 2021, 46(5): 253-258.
|
| [12] |
Fan Zhiyang, Li Xianjun, Liu Junjie, Hu Bo, Zhou Tong, Hao Yuan.
Effect of water atomization quenching on thin steel sheet 35CrMnSiA
[J]. Heat Treatment of Metals, 2021, 46(5): 267-271.
|
| [13] |
Liu Jie, Xu Le, He Xiaofei, Li Xiaoyuan, Wang Maoqiu.
Carbide precipitation behavior and its effect on recrystallization in Ti microalloyed non-quenched and tempered steel
[J]. Heat Treatment of Metals, 2021, 46(4): 9-15.
|
| [14] |
Yu Haihua, Yan Haiyan, Zhang Jingtong, Wang Yukui, Huang Zhiyong, Wu Jianxin, Wei Zhenwei.
Failure analysis of 30CrMnSiA steel countersunk bolt
[J]. Heat Treatment of Metals, 2021, 46(3): 223-228.
|
| [15] |
Dong Zhihao, Zheng Zhijun, Peng Le.
Effect of heat treatment on anisotropic microstructure of additive manufacturing 316L stainless steel
[J]. Heat Treatment of Metals, 2021, 46(10): 45-52.
|
