| [1] |
Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting.
Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
|
| [2] |
Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu.
Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel
[J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
|
| [3] |
Chen Liansheng, Zhang Luyou, Tian Yaqiang, Yang Zixuan, Li Hongbin, Pan Hongbo, Wei Yingli.
CCT curves and microstructure and properties of low-carbon high strength marine steel
[J]. Heat Treatment of Metals, 2022, 47(4): 63-68.
|
| [4] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [5] |
Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang.
Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
|
| [6] |
Wang Qi, Wu Guangliang.
Effect of tempering temperature on microstructure and properties of 1100 MPa grade high-strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 146-150.
|
| [7] |
Huo Jinyuan, Chen Guojun, Zheng Dexin.
Induction hardening process of internal spline in tulip of constant speed drive shaft
[J]. Heat Treatment of Metals, 2022, 47(4): 178-181.
|
| [8] |
Liu Wenbin, Qiao Longyang, Pan Xinyu, Cheng Ge, Li Aina, Pei Xinjun.
Effect of quenching temperature on microstructure and properties of M390 powder metallurgical stainless steel for chopping knives and scissors
[J]. Heat Treatment of Metals, 2022, 47(4): 189-195.
|
| [9] |
Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun.
Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings
[J]. Heat Treatment of Metals, 2022, 47(4): 263-267.
|
| [10] |
Huang Long, Deng Xiangtao, Wang Zhaodong.
Effect of tempering temperature on microstructure and properties of particle reinforced low-alloyed wear resistant steel
[J]. Heat Treatment of Metals, 2022, 47(3): 1-6.
|
| [11] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [12] |
Sun Guojin, Gao Zhiwen, Cui Xiaoyan, Gao Kekun, Sun Li.
Effect of dual liquid quenching on microstructure and hardness of 9Cr2Mo steel roller
[J]. Heat Treatment of Metals, 2022, 47(3): 88-91.
|
| [13] |
Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei.
Effect of quenching temperature on microstructure and properties of a low cobalt secondary hardening steel
[J]. Heat Treatment of Metals, 2022, 47(3): 92-96.
|
| [14] |
Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo.
Effects of Si content and quenching temperature on microstructure and properties of Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(3): 130-135.
|
| [15] |
Luo Diqiang, Yu Yinhong, Zhang Zhenming, Feng Xiaoming, Liu Min, Lai Chaobin.
Effect of yttrium-based rare earth on inclusions and cryogenic temperature impact property of high strength shipbuilding steel
[J]. Heat Treatment of Metals, 2022, 47(3): 142-146.
|
