| [1] |
Wu Hui, Lin Shengyao, Li Xinkai, Gong Yuhui, Wei Deqiang.
Effect of induction hardening on microstructure and properties of 42CrMo steel crankshaft connecting rod journal
[J]. Heat Treatment of Metals, 2022, 47(2): 119-124.
|
| [2] |
Yan Yong, Bu Hengyong, Li Mengnie, Zheng Shanju.
Kinetics of austenite grain growth of S34MnV steel
[J]. Heat Treatment of Metals, 2021, 46(6): 153-159.
|
| [3] |
Tan Xiaomeng, Tian Feng, Qiao Xin, Guo Xin'ai.
Cracking failure analysis on a high speed shaft of belt conveyor reducer
[J]. Heat Treatment of Metals, 2021, 46(6): 253-255.
|
| [4] |
Che Pengcheng, Shao Wenzhu, Cheng Yi, Wang Shuo, Xu Hang, Li Xianshuang, Tan Shuping.
Influence mechanisms of instantaneous overheating on fracture and precipitate distortion of high chromium nickel austenitic steel
[J]. Heat Treatment of Metals, 2021, 46(5): 235-241.
|
| [5] |
Huang Xin, Zhou Jiguang, Fang Zhixiao, Wu Wei, Wen Yonghong.
Fracture cause analysis of 30CrMnSiA steel bolt for motor fixing
[J]. Heat Treatment of Metals, 2021, 46(5): 253-258.
|
| [6] |
Li Mengyang.
Fracture failure analysis of 2Cr13 steel bolt in a 600 MW subcritical unit
[J]. Heat Treatment of Metals, 2021, 46(11): 250-253.
|
| [7] |
Kang Zhenwei, Zhou Genshu, Liu Lijun, Zhang Xiaoke, Wang Mengjie.
Failure analysis of compressor impeller blade made of 17-4PH stainless steel
[J]. Heat Treatment of Metals, 2021, 46(11): 254-257.
|
| [8] |
Zhang Huaiqing, Yu Jinwen, Wang Qingquan, Fang Guijing, Guan Huihuan, Wang Yiming, Wei Cong.
Crack failure cause analysis of diesel engine crankshaft
[J]. Heat Treatment of Metals, 2021, 46(10): 270-274.
|
| [9] |
Zou Longjiang, Qi Lin, Shi Shuyan, Liu Shutan.
Fracture failure analysis of 3Cr13 steel diesel cycle pump spindle
[J]. Heat Treatment of Metals, 2020, 45(7): 202-205.
|
| [10] |
Jie Xiao, Zhong Qiangqiang, Wang Junfeng, Chen Jinshui, Xiao Xiangpeng.
Low cycle fatigue behavior of Cu-Cr-Zr alloy
[J]. Heat Treatment of Metals, 2020, 45(4): 105-109.
|
| [11] |
Huang Bin, Lin Shengyao, Mao Xiaofeng, Li Liangqun, Zheng Qifeng, Gu Jianfeng, Liu Qingdong.
Cause analysis of magnetic particle indication on 42CrMo steel crankshaft neck
[J]. Heat Treatment of Metals, 2020, 45(4): 224-228.
|
| [12] |
Wang Ning, Ding Beidou, Cui Meng , Feng Zhaoping.
Cracking cause analysis of Cr12MoV steel cutting tool
[J]. Heat Treatment of Metals, 2020, 45(10): 246-248.
|
| [13] |
Wang Ruomin, Chen Guohong, Shi Peng, Miao Chunhui.
Fracture failure analysis of blower shaft
[J]. HTM, 2016, 41(9): 179-181.
|
| [14] |
Du Peixuan1,2, Liang Yilong1,2, Lei Lei1,2, Jiang Yun1,2,Yang Ming1,2.
Failure analysis of HXD3B primary spring used in locomotive
[J]. HTM, 2016, 41(8): 189-192.
|
| [15] |
Deng Junwei, Cai Chanchan, Gao Feng Wang Lei.
Analysis on quenching crack of crankshaft for Toyota 3.8L car
[J]. HTM, 2015, 40(9): 214-218.
|
