Wear resistance of 5A12 aluminum alloy after plasma nitriding

[1]

Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng. Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing [J]. Heat Treatment of Metals, 2022, 47(4): 245-250.

[2]

Luo Jiandong, Hu Yanhong, Lin Yuzhou. Application of low temperature nitriding process with double power supplies on 316 stainless steel [J]. Heat Treatment of Metals, 2022, 47(3): 7-13.

[3]

[4]

Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang. Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel [J]. Heat Treatment of Metals, 2022, 47(3): 191-197.

[5]

Zhou Zhongping, Zhang Xiaojuan, Bai Lu, Yu Fangyin, Min Yong'an. Microstructure and properties of T250 steel after plasma nitriding [J]. Heat Treatment of Metals, 2022, 47(3): 210-214.

[6]

Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin. Research progress of laser modification technology for titanium alloy surface [J]. Heat Treatment of Metals, 2022, 47(3): 215-221.

[7]

Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li. Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel [J]. Heat Treatment of Metals, 2022, 47(2): 178-182.

[8]

Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding [J]. Heat Treatment of Metals, 2022, 47(2): 200-204.

[9]

Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng. Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface [J]. Heat Treatment of Metals, 2022, 47(1): 185-191.

[10]

Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi. Preparation technology of laser clad Fe-based coating for shield sealing runway repair [J]. Heat Treatment of Metals, 2022, 47(1): 202-211.

[11]

Zhang Pengqi, Shang Hongbao, Li Li, Zhou Zhiqiang. Application of plasma hardening process for 316L stainless steel valve inner parts [J]. Heat Treatment of Metals, 2022, 47(1): 212-216.

[12]

Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun. Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer [J]. Heat Treatment of Metals, 2022, 47(1): 276-280.

[13]

Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li. Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(9): 223-228.

[14]

Gong Yuling, Wu Meiping, Cui Chen, Miao Xiaojin. Effect of overlap rate on microstructure and properties of Ni60A clad coating on TC4 titanium alloy [J]. Heat Treatment of Metals, 2021, 46(9): 229-233.

[15]

Miao Xiaojin, Xia Sihai,Wu Meiping, Yu Jinghu, Zhao Zishuo, Cui Chen, Zhang Chunlei. Effect of adding CeO₂ on properties of Al-Ti laser clad coating on aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 234-240.

PDF