| [1] |
Huang Long, Deng Xiangtao, Wang Zhaodong.
Effect of tempering temperature on microstructure and properties of particle reinforced low-alloyed wear resistant steel
[J]. Heat Treatment of Metals, 2022, 47(3): 1-6.
|
| [2] |
Huang Juan, Huang Yuanchun, Shen Zhenyu, Li Xiangyue, Zeng Yu, Yang Gengchen.
Effect of finish rolling temperature and annealing temperature on microstructure and properties of 5052 aluminum alloy sheet
[J]. Heat Treatment of Metals, 2021, 46(9): 79-84.
|
| [3] |
Li Minna, Ma Baofei, Guo Jinming, Wu Chen, Xiao Songtao.
Heat treatment of TB8 titanium alloy with high strength and toughness
[J]. Heat Treatment of Metals, 2021, 46(9): 116-119.
|
| [4] |
Wu Hao, Deng Xiangtao, Li Chengru, Sui Yi, Zhang Tao, Ji Wenbo, Wang Zhaodong.
Analysis on cold bending fracture of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(9): 262-267.
|
| [5] |
Zhang Hongliang, Feng Guanghong, Wang Baoshan.
Strengthening mechanism of Nb(C, N) precipitation and controlled cooling process optimization of Nb-containing steel bars under direct rolling condition
[J]. Heat Treatment of Metals, 2021, 46(8): 133-138.
|
| [6] |
Hua Siming, Zhang Pingze, Liu Zili.
Aging process, microstructure and properties of CuCr1 alloy contact wire
[J]. Heat Treatment of Metals, 2021, 46(5): 143-149.
|
| [7] |
Yang Bo, Sun Jian, Guo Hongli.
Effect of controlled cooling process on microstructure and properties of Ti-microalloyed medium carbon steel plate
[J]. Heat Treatment of Metals, 2021, 46(4): 118-121.
|
| [8] |
Wang Sicheng, Zhou Dan, Chai Xiyang, Tong Shi, Yang Yang, Wang Tianqi.
Effect of controlled rolling and controlled cooling process on microstructure and properties of 440 MPa grade hull steel
[J]. Heat Treatment of Metals, 2021, 46(4): 138-142.
|
| [9] |
Chen Zhuo, Wang Chengsi, Jin Bin, Liu Jingbao, Hao Lei, Kuang Shuang, Wang Jinrong.
Multiple regulation on mechanical properties of 980 MPa cold-rolled multi-phase steel
[J]. Heat Treatment of Metals, 2021, 46(4): 157-160.
|
| [10] |
Shi Xiaoxia, Ren Huiping, Li Xiao, Wang Chao, Gong Xin.
Study on boundary of efficient quenching and tempering process of 26CrMoVNbRE steel
[J]. Heat Treatment of Metals, 2021, 46(3): 39-45.
|
| [11] |
Chen Yiwu, Wu Xinxiang, Zhou Lihua, Fu Tianzuo, Zhao Jing, Li Sheng.
Microstructure and properties of laser clad layer on high strength stainless steel
[J]. Heat Treatment of Metals, 2021, 46(10): 232-236.
|
| [12] |
Wang Keqiang, Liu Rendong, Guo Jinyu, Fu Wei, Huang Qiuju, Sun Rongsheng.
Development of cold-rolled 800 MPa grade high strength low alloy steel for automobile
[J]. Heat Treatment of Metals, 2021, 46(1): 120-124.
|
| [13] |
Hu Linzhuang, Guo Hao, Lei Jianzhong, Liu Yang, Du Sanming, Zhang Yongzhen.
Influence of controlled forging and cooling process on microstructure evolution of GCr15 bearing steel
[J]. Heat Treatment of Metals, 2020, 45(9): 134-138.
|
| [14] |
Li Zhihong, Ding Hao, Zhu Shigen.
Effect of electrical contact strengthening on microstructure and properties of Ni/Cu composite coatings
[J]. Heat Treatment of Metals, 2020, 45(8): 228-232.
|
| [15] |
Yan Lei, Li Xuming, Li Kaifeng, Ma Fengchun.
Effect of tempering process on microstructure and properties of 1Cr12Ni3MoVN steel
[J]. HTM, 2020, 45(3): 196-199.
|
