| [1] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [2] |
Pan Zhen.
High pressure gas quenching equipment and technology
[J]. Heat Treatment of Metals, 2021, 46(4): 247-249.
|
| [3] |
Liang Ruijun, Wang Zhiqiang, Li Huawen.
Displacement boundary conditions in heat treatment simulation analysis of 17CrNiMo6 steel helical gear
[J]. Heat Treatment of Metals, 2021, 46(12): 262-267.
|
| [4] |
Zhang Chunlei1, Li Zongke2, Shao Honghong2, Qi Yongdong2, Zhu Zihong2, Qi Changyang2.
Cooling characteristics and application of AQ110 polymer quenching medium
[J]. HTM, 2016, 41(9): 195-199.
|
| [5] |
Xue Yuna, Guo Hui, Guo Qiaoling, Yang Zhen.
Quenching process control of A517Gr.Q chord for jack-up leg
[J]. HTM, 2016, 41(3): 88-91.
|
| [6] |
Luo Yuyuan, Jie Xiaohua, Lu Guohui, Zhang Liuyan.
Preparation and cooling characteristic of a new formula water-based quenching medium
[J]. HTM, 2016, 41(2): 215-219.
|
| [7] |
Liu Yangchun.
Cause and resolutions on uneven hardness of 75Cr1 steel after quenching
[J]. HTM, 2015, 40(6): 207-211.
|
| [8] |
Zhang Luan, Wang Aixiang, Li Baokui, Gu Min.
Research and application of interrupted quenching in nitrate bath of carburized gear
[J]. HTM, 2015, 40(3): 173-178.
|
| [9] |
Yao Yajun, Luo Changzeng, Shi Juyan, Liang Wei.
Distortion control of 17CrNiMo6 large heavy-duty inner gear ring during carburizing and quenching
[J]. HTM, 2014, 39(1): 137-140.
|
