Effects of atmospheric plasma sprays parameters on deposition efficiency of TiB2 wettable cathode coatings

doi:10.13251/j.issn.0254-6051.2016.03.007

HTM

Previous Articles Next Articles

Effects of atmospheric plasma sprays parameters on deposition efficiency of TiB2 wettable cathode coatings

1. Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology； 2. Yunnan Metallurgy Group Co

Online:2016-03-22 Published:2016-04-05

Abstract

CLC Number:

TG174.44

Peng Ruzhen1, Li Rongxing1, Yu Xiaohua1, Xie Gang2. Effects of atmospheric plasma sprays parameters on deposition efficiency of TiB2 wettable cathode coatings[J]. HTM, doi: 10.13251/j.issn.0254-6051.2016.03.007.

[1]	Xie Jing, Xie Shan, Quan Qiongrui, Li Xin. Metallography technology of plasma sprayed Al₂O₃ ceramic coating [J]. Heat Treatment of Metals, 2021, 46(4): 210-216.
[2]	Cui Jing, Guo Yuzhu, Pang Ming, Yang Guangfeng. Defect analysis and mechanical properties of supersonic plasma sprayed ZrO₂ coating [J]. Heat Treatment of Metals, 2020, 45(8): 216-221.
[3]	Liu Haijun, Gao Weimin, Tao Chong. High temperature friction properties of NiCoCrAlYTa-Al₂O₃ composite coating by atmospheric plasma spraying [J]. Heat Treatment of Metals, 2020, 45(4): 194-198.
[4]	Song Jinsong, Jia Zhining, Zhang Tianxu, Xu Xiaodong, Xie Ying, Yan Dianran. Effect of Ti on microstructure and properties of plasma sprayed Fe-Al₂O₃-FeAl₂O₄ composite coating [J]. Heat Treatment of Metals, 2020, 45(4): 199-203.
[5]	Cao Yuxia, Liu Jinqiang, Sun Jingwei, Wang Zhilin, Zhao Wenwu, Hao Bin. Properties of atmospheric plasma-sprayed NiCr/Cr₃C₂ composite coating [J]. Heat Treatment of Metals, 2020, 45(12): 179-183.
[6]	Wang Yunliang1, 2, Deng Changguang2, Zhan Zhaolin1, Zhang Jifu2. Thermal shock resistance and failure mechanism of CMAS deposited PS-PVD 7YSZ coating [J]. HTM, 2017, 42(4): 175-179.
[7]	Zhang Shan, Li Qiang, Zheng Zhenhuan. Oxidation and corrosion resistance of Cr3C2-NiCr coating at high temperature [J]. HTM, 2016, 41(9): 32-37.
[8]	Cao Yuxia1, 2. Oxidation properties of the APS NiCoCrAlY/Al2O3-30%B4C composite coating [J]. HTM, 2016, 41(3): 147-150.
[9]	Li Changqing, Ye Xionglin, Deng Zhichang. Formation mechanism of nanostructured Al2O3-13%TiO2 coating fabricated by supersonic plasma spraying [J]. HTM, 2016, 41(10): 71-74.
[10]	Zhang Xinge1,2, Deng Changguang2, Deng Chunming2, Pei Hezhong1, Zhang Xiaofeng2. Ni-Cr-Al-Y alloy coatings prepared by different technologies and their properties [J]. HTM, 2015, 40(8): 79-83.
[11]	Niu Yonghui1，Yang Jun1，Zhu Langtao2，Yang Jianfeng3，Bai Yu3. Microstructure and abrasive resistance of ZrO₂-MoSi₂ coatings deposited by supersonic plasma spraying [J]. HTM, 2015, 40(8): 83-87.
[12]	He Junbo1, Li Chunfu1, Yao Mengjia1, Sun Yanan1,2, Hou Yu2. Tribological performance of AT13/MoS₂composite coatings prepared by plasma spraying [J]. HTM, 2015, 40(7): 99-102.
[13]	Zhong Yinghong1，Lu Xin1，Ji Yaping2，Feng Zezhou3，Feng Yanling3，Yu Hao3，Li Fei3. Thermal shock resistance of gradient thermal barrier coating prepared by atmospheric plasma spraying [J]. HTM, 2015, 40(7): 176-179.
[14]	He Junbo1，Li Chunfu1，Yao Mengjia1, Sun Yanan1,2. Microstructure and corrosion resistance of AT13/MoS₂composite coating prepared by atmospheric plasma spraying [J]. HTM, 2015, 40(6): 38-41.
[15]	Cao Yuxia1, Du Lingzhong2, Zhang Weigang2, Lan Ye3, Huang Chuanbing2. Effect of hBN content on mechanical properties of atmospheric plasma-sprayed NiCr/Cr₃C₂-hBN composite coating [J]. HTM, 2015, 40(6): 163-166.

Effects of atmospheric plasma sprays parameters on deposition efficiency of TiB2 wettable cathode coatings

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments