| [1] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [2] |
Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin.
Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel
[J]. Heat Treatment of Metals, 2021, 46(9): 133-137.
|
| [3] |
Wei Nasha, Yuan Ruize, Niu Xuemei, Chen Zhigang, Chen Zhi, Yan Xianguo.
Control mechanism of residual stress in 35MnB alloy steel by deep cryogenic treatment
[J]. Heat Treatment of Metals, 2021, 46(5): 104-110.
|
| [4] |
Zhu Fei, Luo Xiaobing, Yang Caifu, Chai Feng, Zhang Zhengyan.
Effect of aging temperature on microstructure and mechanical properties of direct quenched Ni-Cr-Mo-V-Cu steel
[J]. Heat Treatment of Metals, 2021, 46(11): 54-63.
|
| [5] |
Liu Luojin, Liang Xiaokai, Sun Xinjun.
Solution and precipitating behaviors of TiC particles in high Ti low alloy steel
[J]. Heat Treatment of Metals, 2020, 45(4): 110-114.
|
| [6] |
Xiao Jieliang, Huang Cheng, Ma Xianyin.
Controlled water quenching cooling process of alloy steel shaft end for forklift
[J]. Heat Treatment of Metals, 2020, 45(12): 110-113.
|
| [7] |
Wang Quan1，Wu Pengxiang1, 2，Sun Tingting1 .
Effect of tempering technology on microstructure and mechanical properties of ultra-low carbon alloy steel
[J]. HTM, 2017, 42(4): 91-94.
|
| [8] |
Zhao Yang1, Sun Zhanhua2.
Welding microstructure and properties of low alloy steel for construction
[J]. HTM, 2017, 42(2): 87-91.
|
| [9] |
An Baifeng1, Gao Guhui1, Gui Xiaolu1, Bai Bingzhe1,2, Weng Yuqing1,2.
Effect of austenite reverse transformation and Q&P process on microstructure and mechanical properties of high strength low alloy steel
[J]. HTM, 2016, 41(9): 74-77.
|
| [10] |
Huang Zeting, He Yunhong.
Isothermal quenching of a new kind of Cr-Mo-Ni-Mn-Si alloy steel
[J]. HTM, 2016, 41(9): 148-152.
|
| [11] |
Xie Chunqian, Han Yun, Liu Huasai, Kuang Shuang, Teng Huaxiang.
Effects of continuous annealing temperature on mechanical properties of hot-dip galvanized 550 MPa low alloy steel
[J]. HTM, 2016, 41(6): 159-161.
|
| [12] |
Ma Yongqing1, Zhang Xiaojing2, Liang Yufen2.
Microstructure and tempering hardness of Cr-W-Mo-V high alloy medium-upper carbon steel
[J]. HTM, 2016, 41(4): 30-34.
|
| [13] |
Li Binglei1,2, Jin Zili2, Ren Huiping1,2,Zhang Lingyu1,2,Qu Wei1,2 .
Effect of molybdenum on microstructure and properties of high strength low alloy steel
[J]. HTM, 2016, 41(1): 145-148.
|
| [14] |
Hu Songtao1，Chen Hongye2，Li Shengli2，Tang Guangbo3.
Hot deformation behaviors of high carbon alloy steel 75Cr1
[J]. HTM, 2015, 40(8): 132-137.
|
| [15] |
Jiang Chunhong1, Yu Qiyu1, Ma Qin2.
Effect of heat treatment on microstructure and properties of large cross-section specimen for LS8 cast steel
[J]. HTM, 2015, 40(4): 77-81.
|
